0
Chevy Corvette
Launched in 1953, Chevy Corvette is a sports car manufactured by General Motor’s Chevrolet division. Harley Earl designed its first model, a convertible. It is Commonwealth of Kentucky’s official sports car.
4,587 Questions
How do you convert the air conditioner from R-12 to R-134a on a 1975 corvette?
Your local auto parts store will have a kit that will give you everything you need to change it over including directions for less than $50.
How can you open the hood on your 1980 corvette whit a broken cable?
Push out the plastic grommit located in the windshield wiper mechanism through behind each latch. Carefully insert a screwdriver through each now open hole and lift up on latch tang. Each side will require a different length screwdriver. If yours is already broken, I would check out a friends C3. It is quite easy once see how every thing is located and opperates.
Where is the horn located on a 2000 Corvette?
We are having the same problem on a 2000 Corvette, were you able to figure it out?
How much would a 1953 Corvette cost?
$3,498 for the original sticker price and $200,000-$300,000 right now.
How do you change the antenna mast for a 1988 Corvette?
I changed mine by going through the hatch as if you were going to change the tail lights. The other option is to remove the wheel and wheel well cover. More work and the car is up on a jack.
Where is the fuse box for 1985 Corvette?
It is on the passenger side of the dashboard.When you open the door you will be able to see it.
How do you disable the Factory alarm on a Kia Spectra?
The easiest way to disable your Kia factory alarm system is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
Where is ECM electronic control module on 1988 Corvette?
The ecm on a 1988 Corvette is mounted under the dash on the passenger side, I just had to get one for mine and it took the junk yard employees 2 hours to find and remove it. You will need to talk to a Corvette mechanic or look through a manual with exploded views to find out how to get it out withour distroying the trim. The ecm on a 1988 Corvette is mounted under the dash on the passenger side, I just had to get one for mine and it took the junk yard employees 2 hours to find and remove it. You will need to talk to a Corvette mechanic or look through a manual with exploded views to find out how to get it out withour distroying the trim.
How much is a 1977 corvette 4 speed worth?
That is a tough question. It depends on quality, originality, colors, options, and a number of other factory. But a general idea would be between 7K to 30K or more. RJ Sottile www.hobbycarcorvettes.net
Where is the horn relay fuse located on a 2002 corvette?
It is located on the passenger side under the hood. You will have to open the black box by turning the knob. In side you will find a fuse and relay module for the horn.
What is the front drivers side fender keyhole on a Corvette for?
The driver's fender keyhole on older corvettes is to turn on and off the factory alarm system. The system is wired to sound an alarm if the hood or doors are dusturbed while the alarm is activated.
What is the correct bleeding procedure on a 1976 corvette brake bsystem?
biasing check valves can reduce pressure during pedal-induced rear caliper bleeds. vacuum bleeding gives much better results.
How do you remove the ignition switch on a 1986 Oldsmobile?
Remove the horn pad on your steering wheel by removing the 3 nuts on the back of the steering wheel, now with the keys out and the steering wheel locked, loosen and remove the nut in the middle of your steering wheel, now u need a steering wheel remover/puller your local autozone should have one for rent/ buy. now in the middle of your steering there should be to holes across from each other now find the 2 bolts that screw into those holes. now once you have done this attach the bolt threw the puller. now in the middle of the puller there should be a large and long bolt with everything in place turn the bolt in the middle and as u turn it the steering wheel will come off. now there might be a piece plastic gently pull that off, now you should be looking at the steering wheel lock place now put your key in and turn it to the on position now you need a steering wheel lock plate remover (or really strong hands and a flat head screw driver.) now at the center of the lock plate ( between the steering wheel shaft and the lock plate theres a ring clip, to remove that you have to push the lock plate back enough to access the clip now once that clips out the plate slides rite off. and now your looking at the blinker before you try to remove that you have to unscrew the hazard lights switch then remove the screw the attaches the turn signal handle from the turn signal assembly, now there are 3 torx screws remove those screws and move the signal assembly off out of the way now you should see the lock cylinder, on the lock cylinder theres a smaller torx screw remove that screw turn the key and the lock should slide rite out. then follow theres directions backwards order and u should be good to go
Where can you buy a 1961 Corvette body?
GOOD LUCK! You can try swap meets, www.craigslist.com, or www.ebaymotors.com They are very tough to find!
Where is the high beam switch located on a 1994 GMC Sierra 2500?
Drop the column down, & the rod that goes from the directional, has a push button switch on it. Click your directional on & off for your hi-beam lights & you'll see which one is working on the rod. It will go in & out, It's near the ignition switch.
How do you reset the car alarm on a 1990 Chevy Corvette?
If the issue is simply having the alarm go off on the vehicle after locking it, then wanting it to stop making all that noise, it's fairly simple. The alarm is readied when you use the power lock to lock the car, then armed once you close the door. After that, if either door or the back hatch is opened, the alarm goes off. You can turn off the alarm by turning the door key in either door from the outside.
How do you replace air conditioning clutch on 1976 corvette?
it will most likely be easier to just replace the pump all at once
How do you adjust the parking break on a 2001 impala?
On the drivers side frame rail is the cable adujuster that you can adjust to increase tension on the E brake.
1986 corvette will run very rough if pumping throttle stop pumping it dies?
Carb overhaul time ... the carb isn't getting enough fuel on its own.
Either that or there is a serious vacuum leak someplace.
Where is the ac relay on a 1984 Corvette?
The high speed blower relay is located on the engine bulkhead bracket next to the blower motor. === ===
How do you replace a 1981 Corvette hood release cable?
You need to make sure that it is in deed the hood cable release that is the problem 1st. Next contact your nearest Dealership. They will be able to replace the cables for next to nothing Cost (At VERY Fair Price)
Where is inertia switch on 95 XJ6?
I may be wrong here, but I'm pretty sure the Intertia switch for a 95 - 97 is behind the beauty panel in the front passenger foot well, to the right. Remove one screw, pull little plastic cover off, inertia switch is forward of the computer.
TRUNCK
Where is the Transmission Dipstick on a 1999 Corvette?
The transmission dipstick on a 1999 Corvette is on top of the transmission. It is located in the engine bay, near the front.
The Transmission on the 1999 Corvette is located in the rear of the vehicle. The Transmission also contains the rear end drive assembly. It is not located on the rear of the engine block as in a traditional vehicle. There is a Drain plug on the bottom of the transmission gear box assembly, as well as a fill/check plug on the side to add and check fluid levels.
How do you disable factory alarm on 91 Toyota MR2 without key fob?
you lock and unlock drivers door from the outside with the key.
-Niko
No this doesn't work as the alarm still activates,you need the fob or contact your local dealer...
