Chevy Corvette

The 1985 Corvette was equipped with the Doug Nash 4+3 manual transmission, which featured four standard gears and an overdrive for enhanced highway efficiency. This transmission allowed for smooth shifting and improved performance in various driving conditions. Additionally, the 1985 model could also come with a 3-speed automatic transmission as an option.

On a 1973 Corvette, the Vehicle Identification Number (VIN) can typically be found in three locations on the frame. The primary location is on the driver's side of the windshield, visible through the glass. Additionally, the VIN is stamped on the frame itself, located on the driver's side near the front of the car, just behind the front suspension. A third location is on the engine block, usually near the oil filter area.

To remove the ignition from a vehicle, first ensure the battery is disconnected for safety. Next, remove any trim or covers around the ignition switch, then locate the mounting screws or bolts securing it in place. Disconnect the electrical connectors and carefully pull the ignition switch out. Finally, reverse the process to install a new ignition if needed.

On a 1990 Corvette, the oil pressure gauge is typically located on the instrument cluster, directly in front of the driver. The oil pressure sending unit, which provides the signal for the gauge, is found on the engine block, usually near the oil filter. To access it, you may need to lift the car and work from underneath, or you can reach it from above the engine. Always ensure the engine is cool and the vehicle is safely supported before attempting any work.

The Dodge Viper and Ford GT are both high-performance sports cars, but their speed can vary based on specific models and conditions. Generally, the Ford GT, particularly the newer models, is known for its advanced aerodynamics and lightweight design, allowing it to achieve impressive acceleration and top speeds. In contrast, the Dodge Viper, while powerful with its V10 engine, typically has a slightly lower top speed compared to the Ford GT. Ultimately, performance can depend on factors like the specific model year and driving conditions.

Your 1986 Corvette's interior lights may not be turning off due to a malfunctioning door switch, which could be stuck in the "open" position. Additionally, the dimmer switch or a fault in the interior light circuit could be causing the issue. It's also worth checking the trunk and glove compartment lights, as they may be contributing to the problem. Inspecting these components should help identify and resolve the issue.

In a 2005 Corvette convertible, the battery is located in the rear of the vehicle, specifically in the trunk area. It is situated on the driver's side, beneath a cover. Accessing the battery requires removing this cover, allowing for maintenance or replacement if needed.

The 2005 C6R Corvette, which is a race version of the Corvette C6, can reach speeds of approximately 185 mph (298 km/h) on the track. Its powerful 7.0-liter V8 engine produces around 600 horsepower, allowing for impressive acceleration and performance in racing conditions. However, actual top speeds can vary based on factors such as aerodynamics, track conditions, and modifications.

The 2005 Corvette with an LS2 engine requires approximately 6 quarts of oil when using an oil filter. Always check the owner’s manual for the specific oil capacity and ensure to use the recommended oil type for optimal performance.

To replace the glove compartment lock on a Chevy Corvette, first, remove the glove compartment by unscrewing any fasteners and disconnecting the hinge. Next, take out the old lock by unscrewing it from the glove compartment door. Install the new lock by securing it in place and then reattach the glove compartment to the dashboard. Finally, test the new lock to ensure it functions properly.

The value of a Jim Beam Corvette decanter can vary significantly based on its condition, rarity, and whether it includes the original packaging. Generally, these decanters can range from around $10 to $100 or more for specific editions or limited releases. Collectors often seek out these decanters, so prices may fluctuate in the collectibles market. To get an accurate value, it's best to check recent sales or consult with collectors and appraisal experts.

The value of a 1963 split-window Corvette can vary significantly based on its condition, mileage, and originality. Generally, prices for well-maintained models range from around $70,000 to over $100,000, with pristine examples or those with rare options potentially exceeding $200,000 at auction. Restored or modified versions may be valued lower, while original, low-mileage cars fetch a premium in the collector market. Always consult recent sales and expert appraisals for the most accurate valuation.

The stock Corvette Stingray, specifically the C8 model introduced in 2020, features a naturally aspirated 6.2-liter V8 engine that produces 495 horsepower with the optional performance exhaust system. The base version without the performance exhaust still delivers 490 horsepower. This power allows the Stingray to achieve impressive acceleration and performance on the road.

The VATS (Vehicle Anti-Theft System) module on a 1990 Corvette is located under the dashboard, specifically on the driver's side. It is typically mounted on or near the steering column. To access it, you may need to remove the lower dash trim panel.

Yes, the 1995 Corvette features a manual lever switch to open the rear hatch. This lever is typically located in the driver's side footwell area, allowing access to the hatch even if the electronic release fails. Additionally, the hatch can also be opened using the key fob or the button inside the vehicle.

On a 1985 Corvette, the manifold absolute pressure (MAP) sensor is typically located on the engine's intake manifold, near the throttle body. It is usually mounted on the driver's side of the engine compartment and connected to the intake manifold via a vacuum hose. This sensor helps the engine control module (ECM) monitor air pressure for optimal fuel management.

It seems you're referencing a specific number, but without additional context, it's unclear what "3914678" pertains to in relation to a Corvette. If you're asking whether a particular Corvette had that VIN (Vehicle Identification Number) or a similar identifier, more information would be needed to verify it. Please provide additional details for a more accurate response.

An oil pressure reading of 128 psi on a 2002 Corvette is unusually high, as typical oil pressure for this vehicle should generally range between 20 to 60 psi when the engine is at normal operating temperature. High oil pressure can indicate potential issues such as a clogged oil filter, faulty oil pressure sensor, or excessive oil viscosity. It's advisable to check the oil level and quality, and consider having the vehicle inspected by a professional mechanic to diagnose the issue accurately.

On a 2002 Corvette, the hood light fuse is located in the fuse box, which is found in the passenger compartment. Specifically, you can find the fuse panel on the driver's side, under the dashboard. The fuse for the hood light is typically labeled in the fuse diagram found on the cover of the fuse box. Always refer to the owner's manual for precise information on fuse locations and specifications.

"Nett" typically refers to the amount after all deductions, including taxes like VAT (Value Added Tax). Therefore, if a price is quoted as "nett," it usually means it does not include VAT. Conversely, if a price is stated as "gross," it would include VAT. Always check the context to be certain, as terminology can vary.

The base price of a new 1967 Chevrolet Corvette was approximately $4,000. However, depending on options and features, the final cost could rise significantly, with some models exceeding $5,000. The 1967 Corvette is particularly notable for its styling and performance, contributing to its lasting appeal among collectors.

The 1981 Corvette, part of the C3 generation, has a total of two places for VIN (Vehicle Identification Number) locations. The primary VIN location is on the driver's side dashboard, visible through the windshield, while the second location is on the driver's side door jamb. These locations help verify the vehicle's identity and specifications.

On a 1975 Corvette, the seat belt sensor is typically located in the seat belt latch assembly, which is mounted on the floor of the vehicle. This sensor is designed to detect whether the seat belt is buckled and to trigger warning indicators. The system may also be integrated with the ignition to prevent the car from starting if the seat belts are not fastened. For precise location and functionality, consulting the vehicle's service manual is recommended.

To rebuild a 1985 Corvette headlight motor, first, disconnect the battery and remove the headlight assembly. Next, disassemble the motor by carefully taking apart the housing, noting the orientation and placement of each component. Clean and inspect the gears, brushes, and electrical connections for wear, replacing any damaged parts. Reassemble the motor with fresh grease, ensuring everything is aligned correctly, and then reinstall it into the headlight assembly.

To disarm a Viper alarm on a 1992 Corvette, you typically need to locate the alarm's control module, which is often installed under the dashboard or behind the radio. The disarm wires are usually color-coded: the "disarm" wire may be a light green or a similar color, but this can vary based on the installation. It's important to consult the specific installation manual for your Viper model or seek professional assistance to ensure proper handling and avoid damaging the vehicle's electrical system.