answersLogoWhite

0

Dodge Intrepid

In this category you can ask questions about Dodge Intrepids. These questions can include where to find parts, how to get help, or how to do it yourself.

1,915 Questions

How do you change the oil pan gasket on a 2002 Dodge Intrepid?

It is not very hard. Your intrepid will need to be lifted. first drain your oil. While your oil is draining take off both your sway bar mounts (located on your frame, a metal bracket over top a rubber bumper) this will allow you to drop your oil pan completely. Remove all your bolts clean the oil pan, especially were your new gasket will set. Install your bolts ensuring not over torque. Fill up your oil, check for leaks. Gasket $25...

Where is the thermostat on a 2002 Dodge Intrepid 2.7L?

The thermostat is located under the housing where the lower radiator hose(yes lower) hooks to the engine.

I need a cooling system diagram for a 1999 intrepid 2.7?

I need a cooling system diagram for a 1999 dodge intrepid 2.7

What tools are needed to change brake pads on a 2004 Dodge Intrepid?

common metric socket set, brake fluid, brake pads, some of that brake quiet crap auto zone always give you, heavy duty flat head.... a jack, and a little know how, and time

What kind of motor oil do you use for a 96 Dodge Intrepid?

On the back cover of my owner's manual it states the following:

SAE 5 W 30 for 3.3 L engine

SAE 10 W 30 for 3.5 L engine

How do you change the power window motor on a 1999 Dodge Intrepid?

1999 dodge intrepid rear windo don't know working i change 2 time same place you can Email .e sunilpatel2002@hotmail.com

Where is the location of the number 1 spark plug on a 2.7 engine Dodge Intrepid?

The number one cylinder for the 2.7 Dodge engine on the passenger side. It is the cylinder closest to the front of the engine.

How do you replace the timing belt on a 97 escort?

We really need to know which of the three possible engines you have, but here is a rough outline:

If you have a 1.9 or a 2.0 SPI engine (not a 2.0 ZETEc)Jack up the RF corner of the vehicle and remove the RF wheel. Remove the front motor mount located on the rightfender apron and support the engine by the oil pan using a floor jack with a block of wood(You will now be able to jackthe engine up and down as you need to). Remove the serpentine belt and if there is a belt tensioner in the way of the timing cover, remove it too. Remove the crankshaft pulley and remove the timing cover. Remove the old belt, and it is recommended that you replace the water pump at this time as well. Line up the crankshft timing mark(the keyway will be pointing straight up), and line up the camshaft timing mark(an arrow cut into one of thewindows of the gear lines up witha dot on the cylinder head). Install the new belt ad reaasemble in the reverse order as disassembly.

A 2.0 ZETEC engine requires special tools as there are no timing marks of woodruff keys for the camshafts.The valve cover has to come off, and a special alignment tool used to line up the cams.The crankshaft is lined up using a special tool inserted into the engine block through a holethat is exposed when a plug is removed.

On a 2002 Dodge Intrepid where is the Fuel Filter Location?

The fuel filter on a 2002 Intrepid is part of the fuel pressure regulator mounted on the fuel pump module. It mounts to the frame rail in front of the fuel tank.

Dodge intrepid 3.5 l coil pack firing order?

According to Aouto zone printout,1997 dodge intrepid 3.5 firing order- 1-2-3-4-5-6 plugs are left side1-3-5 from front ,right side-2 4 6 front to back. According to diagram I have,Coil reads-from front left, clockwise-6 3 1 5 2 4. Hope this helps

How do you reset the computer on a 2004 dodge intrepid?

With a scan tool, or unhook the battery for 5 minutes.
With a scan tool or by unhooking the battery.

With a scan tool, or unhook the battery for 5 minutes.
With a scan tool or by unhooking the battery.

How much will it cost to rebuild a 2002 Dodge Intrepid transmission?

I just received the quote for my 2001 Intrepid transmission repair (new torque converter, IO sensors, planetary assembly, and some kit with new clutch, seals, etc...), essentially a rebuilt transmission. The total cost comes to $2171.55. Great Chirstmas present.

Dodge intrepid 2.7 firing order?

As strange as it sounds the firing order is 1-2-3-4-5-6. Starting from front left looking at the engine are the number 1-3-5 cylinders and on the right 2-4-6.

Po563 code on a 2004 Dodge Intrepid?

P0563 system voltage too high. You need to check the batery cables, grounds, and the alternator for a overcharge condition.

Thermostat location 2.7 L intrepid?

Follow the lower radiator hose to the block. The thermostat is under the housing the lower hose hooks to.