answersLogoWhite

0

📱

Electronics

Electronics are a branch of technology and science that deals with the control of the flow of electrons.

3,725 Questions

Can you have Final cut pro on a normal laptop?

Define "normal laptop". there are requirements ;

Requirements to install all Final Cut Studio applications
  • Mac computer with an Intel processor
  • 1GB of RAM (2GB of RAM recommended when working with compressed HD and uncompressed SD sources; 4GB of RAM recommended when working with uncompressed HD sources)
  • ATI or NVIDIA graphics processor (integrated Intel graphics processors not supported)
  • 128MB of VRAM
  • Display with 1280-by-800 resolution or higher
  • Mac OS X v10.5.6 or later
  • QuickTime 7.6 or later
  • DVD drive for installation
  • 4GB of disk space required to install all applications (Final Cut Pro, Color, DVD Studio Pro, Soundtrack Pro, Motion, Cinema Tools, Compressor, and Apple Qmaster)
  • 46GB of disk space required for optional content
    • 9GB for DVD Studio Pro content
    • 7GB for Motion templates
    • 22GB for audio content
    • 8GB for LiveFonts

If you meet those requirements then yes you can install it! :)

What happens when text is copied electronically?

when you try to copy a text electronically in your computer than first it will store on your clipboard of computer. or if you want to copy text through using microprocessor 8085 or 8086 than it may copy according to your program (in general purpose register).

Who uses a bionic ear?

Jamie Summers (actress Lindsey Wagner) in "The Bionic Woman" uses her right bionic ear for hearing high - pitch ultra sounds from several feets away.

How do you get flash sequence in model lighthouse project LED is just glowing but there is no flash sequence?

If the LED glows continuously, then it is receiving a constant power source. There are two ways to make the LED flash.

Method 1: Build a small timer circuit that turns the LED power line on and off at the intervals required. This is a very simple task if you have the right components, tools and knowledge. If you are missing components, they are available very cheaply. If you are missing knowledge and tools, then go to method 2.

Method 2: Buy a flashing LED. Most component suppliers have them in the opto-electronics section and they should have information about the rate of flash. They require no additional components and although they are expensive compared to standard LEDs, they are a very convenient alternative to designing, building and testing circuits to do the same job.

What are electron guns?

Decoder tubes for color or black and white images

How does a speker work?

A coil of wire is attached to the diaphragm, and then attached directly to the two terminals, which is why speakers actually can be reverse-polarised (wired backwards). In the coil of wire is a neodymium magnet (really strong magnet). When current passes through the coil, it creates an electromagnet, and trys to cling to the magnet, and when current is removed, the coil won't try to cling. This creates the sound.

If you have conected 4 6volt bateries in series which cable from the charger do you connect first?

same as any single 24v battery. Positive first then negative to frame just to be safe.

Can 2 USB Bluetooth adaptors work together?

If you mean having two USB adapters plugged in to the computer, then yes, they can work very well. As far as I'm aware, most Bluetooth software will choose the first available bluetooth adapter. So if you're using one device to send or receive, and you tell the program to scan for devices, it will see that the first one is in use by another process and it will attempt to use the second one.

I've only tested this on Linux, but I'll take my two mini adapters in to work and try it on Windows to confirm this works there too.

Can you charge a 12v lawnmower battery with a 12v car battery?

can a 12v lawn mower sealed battery be charged with 12v battery charger use on cars

Battery light goes off you you acselerate?

Alternator belt is probably loose and slipping. If you can turn the alternator by hand and the belt slips its too loose. Retension alternator belt

Difference between tally 7.2 and 8.1?

Tally 7.2 is not be able to do work with other languages like hindi but 9 is able to deal with all the languages .

tally 7.2 is no having advance terms like vat . but 9 is having all those terms which is helpful to deal a/c easily & get result soon...

What is an electronic gadget?

an electronic gadget is a gadget that has an input transducer a processor and an out put transducer

Does a tracfone come with a telephone number?

If you buy it new, a Tracfone will almost always come with at least 10 bundled minutes. When you activate your account with those minutes, you get a phone number. If you bought it second hand, the phone only has a number if it's still in service. You can get a new number by buying minutes for the phone.

When should you not wear a wrist strap when working on your PC?

The wrist strap is used to prevent static charge buildup, which can arc from you to the PC, and potentially cause damage.

Because of this, there is no time when you should NOT wear a wrist strap. It may not be needed at all times, but it certainly doesn't cause an issue if you do.

I do not always use this; when it is warm and damp, static charge buildup is less of a problem. Also, if you are working in an area away from things that naturally help build up charge on your person (shag carpet, wool,...), it because less of an issue. But there is always some level of risk involved when working inside a computer and not having this.

Why are amplifiers needed in electronic circuits?

An electrical circuit is used to guide electricity through a path. This is used because when electricity is guided to various things it can power them.
Anything that uses electricity.

It's called a circuit because the electrons have to circulate back to where they came from.

A battery has two poles. The circuit is only complete when both terminals are connected via the device(s) driven.

A generator has two poles from the coil inside. Electricity can only flow when both ends of the coil are attached.