answersLogoWhite

0

🚗

Late Model 1979-New Ford Mustangs

The 1979 model of Ford Mustang was based on the larger Fox platform that featured larger trunk and restyled interior to accommodate up to four people. It was available in three body styles – convertible, coupé and hatchback.

8,314 Questions

How do you put a dash back in a 1989 Mustang 5.0 and where do the wires go?

To reinstall the dashboard in a 1989 Mustang 5.0, first ensure that all necessary components, like the instrument cluster and HVAC controls, are separated and accessible. Align the dash with the mounting points and secure it using screws, ensuring that any clips or brackets are also fastened. For wiring, connect the harnesses for the instrument cluster, lighting, and any other electrical components, referring to a wiring diagram specific to the model for proper connections. Finally, double-check all connections before securing the dash completely.

What are some problems in Atlanta?

Atlanta faces several challenges, including traffic congestion, affordable housing shortages, and socioeconomic disparities. The city's rapid population growth has strained infrastructure, leading to longer commute times and increased pollution. Additionally, issues like homelessness and crime persist, impacting community safety and quality of life. Efforts to address these problems are ongoing but require coordinated resources and planning.

What horsepower is 200cc?

The horsepower of a 200cc engine can vary depending on its design and application, but it typically ranges from about 5 to 15 horsepower. For small engines, such as those found in motorcycles or lawn equipment, you might expect around 6 to 8 horsepower. Performance-oriented engines may produce more, while other factors like tuning and efficiency also play a role in horsepower output.

What happens when your car engine blows out?

When a car engine blows out, it typically results in severe damage, such as a broken crankshaft, blown head gasket, or damaged pistons. This can lead to a loss of power and the inability to operate the vehicle. Often, the engine will require a complete replacement or extensive repairs, which can be costly. Signs of a blown engine may include unusual noises, smoke, or warning lights on the dashboard.

How much horsepower evo x produces?

The Mitsubishi Lancer Evolution X produces approximately 291 horsepower from its 2.0-liter turbocharged inline-four engine. This power is delivered through a sophisticated all-wheel-drive system, allowing for impressive performance and handling. The Evo X is renowned for its rally-inspired engineering and driving dynamics.

How much horsepower does a 99yz400f have?

The 1999 Yamaha YZ400F typically produces around 40 horsepower. This four-stroke dirt bike was known for its strong performance and reliable engine, making it popular among motocross enthusiasts. Its power delivery is characterized by a broad torque curve, providing good acceleration and handling in various terrains.

What is max shaft horsepower?

Max shaft horsepower refers to the maximum power output that can be delivered by a shaft in a mechanical system, typically measured in horsepower (hp). It indicates the peak performance capability of an engine or motor, often used in marine and aviation applications to assess propulsion efficiency. This measurement is crucial for determining the operational limits and performance characteristics of engines and other machinery.

What happens if air intake is blocked?

If the air intake is blocked, the engine may struggle to draw in the necessary air for combustion, leading to decreased performance and efficiency. This can cause the engine to run rough, stall, or even overheat due to insufficient airflow. Additionally, prolonged blockage can lead to severe engine damage and increased emissions, as the fuel-to-air ratio becomes imbalanced. Regular maintenance and inspection can help prevent such issues.

Where is the horn located in a 2000 ford mustang convertible?

In a 2000 Ford Mustang convertible, the horn is typically located in the front of the vehicle, behind the grille. It is usually mounted on the driver's side near the radiator support. To access it, you may need to remove the front bumper or grille, depending on your specific model and configuration.

How much horsepower does a Case IH 1660 combine have?

The Case IH 1660 combine has a rated engine horsepower of approximately 150 to 175 horsepower, depending on the specific model and configuration. This powerful engine enables the combine to efficiently handle harvesting tasks in various crop conditions. Its design focuses on optimizing performance for mid-sized farming operations.

How much horsepower does 899cc mean?

The horsepower of an engine is not directly determined by its displacement (in this case, 899cc), as it also depends on factors like engine design, tuning, and efficiency. However, a rough estimate for a naturally aspirated engine is about 1 horsepower per 15-20cc, which could suggest that an 899cc engine might produce anywhere from 45 to 60 horsepower. Turbocharged or high-performance engines could exceed this range significantly. Ultimately, the exact horsepower would depend on the specific engine's characteristics.

Is a GT-40 faster than a Shelby GT 500?

Yes, the Ford GT40 is generally faster than a Shelby GT500. The GT40, designed for endurance racing, features a lightweight chassis and a powerful V8 engine, allowing it to achieve higher speeds and better handling on the track. In contrast, the Shelby GT500, while also a high-performance vehicle, is more focused on straight-line acceleration and everyday driving. Overall, the GT40's racing pedigree gives it an edge in speed and performance.

What does a start interrupt relay do?

A start interrupt relay is an electrical device used in motor control circuits to manage the start and stop functions of a motor. It allows for the interruption of the motor's operation, enabling safe maintenance or troubleshooting by disconnecting power without needing to shut down the entire system. When activated, it interrupts the power supply to the motor, ensuring that it cannot operate until the relay is reset. This enhances safety and control in various applications, particularly in industrial settings.

How much is a Mustang car gt?

The price of a Ford Mustang GT typically ranges from around $45,000 to $55,000, depending on the model year, optional features, and trim level. Additional features, packages, and customizations can increase the price further. It's advisable to check with local dealerships or the official Ford website for the most accurate and up-to-date pricing.

Where is fuel inertia switch on 2012 mustang?

The fuel inertia switch on a 2012 Ford Mustang is located in the trunk, specifically on the right-hand side near the rear quarter panel. To access it, you may need to remove the trunk liner or cover. This switch is designed to cut off the fuel supply in the event of a collision, preventing fuel leaks. If you suspect it has been triggered, you can reset it by pressing the button on the switch.

Is a ford gt illegal?

No, the Ford GT is not illegal. It is a high-performance sports car produced by Ford, and its legality depends on compliance with local regulations and emissions standards. However, some specific models or modifications may not meet certain regulations in specific regions, so it's essential to check local laws regarding vehicle registration and compliance.

What type of oil does an echo GT 225 take?

The Echo GT-225 string trimmer typically requires a 2-stroke oil mixed with gasoline. It is recommended to use Echo's brand of 2-stroke oil or an equivalent high-quality oil, mixed at a ratio of 50:1 (2.6 ounces of oil per gallon of gasoline). Always refer to the owner’s manual for specific recommendations for your model.

How do you open the engine oil cap for a 2001 Ford Mondeo?

To open the engine oil cap on a 2001 Ford Mondeo, first ensure the engine is cool and the vehicle is parked on a level surface. Locate the oil cap, which is typically found on top of the engine, marked with an oil can symbol. Twist the cap counterclockwise to unscrew it, and lift it off. Be cautious not to drop debris into the engine while the cap is removed.

How much does it cost to replace a seatbelt retractor system and all on a 2003 ford mustang?

The cost to replace a seatbelt retractor system in a 2003 Ford Mustang typically ranges from $150 to $400, depending on whether you choose an aftermarket part or an original equipment manufacturer (OEM) part. Labor costs can add an additional $50 to $100, making the total cost between $200 and $500. It's advisable to get quotes from multiple repair shops for the best pricing.

How much horsepower can a turbine creates in turbocharger?

The horsepower produced by a turbine in a turbocharger varies based on the engine size and design, as well as the specific turbocharger used. Generally, a turbocharger can increase an engine's horsepower by 30% to 50% or more, depending on the application and tuning. For example, a small turbocharger may add around 50 to 100 horsepower to a typical gasoline engine, while larger turbo systems can provide significantly more for performance or racing applications. Ultimately, the exact output will depend on factors like boost pressure, engine efficiency, and tuning.

If you remove the catalytic converter on motorcycle will you loose or gain power?

Removing the catalytic converter from a motorcycle can lead to a slight increase in power due to reduced exhaust restriction, allowing for better engine breathing. However, this can also result in a loss of torque and may negatively affect performance at lower RPMs. Additionally, it can cause increased emissions and may violate local laws regarding emissions control. Overall, the impact on power can vary based on the motorcycle's design and tuning.

Where does transmission fluid go in a 1992 Ford Mustang GT?

In a 1992 Ford Mustang GT, transmission fluid is added through the transmission dipstick tube. To check or add fluid, locate the dipstick, usually at the rear of the engine bay, and remove it. Use a funnel to pour the appropriate type of transmission fluid into the tube, ensuring the fluid level is within the recommended range on the dipstick. Always check the owner's manual for specific fluid type and capacity.

If the valve timing is off will it bend the valves?

Yes, if the valve timing is off, it can lead to valve contact with the piston, potentially causing the valves to bend. This misalignment typically occurs in interference engines, where the clearance between the piston and valves is minimal. If the timing chain or belt slips or breaks, it can result in serious engine damage, including bent valves. Regular maintenance ensures the timing system remains properly aligned to prevent such issues.

Why won't my 1987 mustang gt with an (aod) transmission shift into 4 th gear when using the (od) on my shifter when in (D) it shifts up to 3erd?

If your 1987 Mustang GT with an AOD transmission won't shift into 4th gear when using the OD setting, it could be due to several reasons. Common issues include low transmission fluid, a faulty throttle position sensor, or a malfunctioning governor that controls the shifting points. Additionally, the AOD may be in "limp" mode due to a detected issue, preventing it from shifting into overdrive. It's best to check the fluid levels and consider having the transmission diagnosed by a professional.

How much horsepower does a 2005 mxz 800 have?

The 2005 Ski-Doo MXZ 800 snowmobile is equipped with a 799cc two-stroke engine that produces approximately 150 horsepower. This power output allows for strong performance on trails and in deep snow. The MXZ 800 is known for its agility and handling, making it a popular choice among snowmobiling enthusiasts.