0
Measuring Tools
Measuring instruments includes a vast amount of tools and instruments used for measuring. This would include micrometers (various types for various applications), scaled rules, durometers, spectrometers, tape measures, dumpy levels, spirit levels, combination sets, gauge blocks, vernier calipers, dial indicators, inside and outside calipers, etc.
1,282 Questions
What would you use to measure a pencil case grams or kilograms?
I would use grams, although i have heard both terms used. Hope you find out!
Why is there a groove in a caliper?
appliance this track for this is a narrow strip of copper sex in it to turn when the preserver moving jaw closed to the "collusion should not be harmed bends and exhaustion.
Why are measuring tapes curved?
I suppose you are referring to a "Carpenter's Tape", one that is wound inside of a 4" x 4" metal case. If that is correct then, the carpenter needs the tape to be rigid as it is extended for vast distances. The slight width-wide curve gives the metal tape more rigidity thus allowing the carpenter to obtain accurate measurements.
Why every 16 mark is highlighted in measuring tape does it resemble any scale?
The studs (the verticle boards that hold up a wall behind the drywall in a house) are normally 16" apart. The highlight on each 16 inches 16, 32, 48 etc. on a tape make it easier to build house wall and to do things like hanging a picture on the wall. By finding a single stud in a wall you can locate all of the other studs. (be carefull when the stud you find is near the edge of the wall or opposite where another wall joins the wall from the other side.
What is the names of measuring tools?
it's like rulers, anemometer, thermometer , etc....bstaa anything na nag-memeasure..un na un..
What is micrometer and what is least count of micrometer?
A micrometer is exactly one millionth of a meter the least is 0 (zero)
What do you use to measure the volume of a small object?
Millilitres and/or cubic centimetres are used to measure the volume of a small object.
milileters
An imperial micrometer can read to what accuracy?
An imperial micrometer can measure to within 0.001in (1000th of an inch).
What tools are best when measuring liquids in a lab?
A graduated cylinder is appropriate for "normal" quantities. You may need a micro pipette for very small quantities.
What scientific method is used to measure wind?
When we are measuring wind there are 2 things that are measured. Those 2 things would be the wind direction and the wind speed.
Wind direction we measure with a instrument we call a wind vane, when we measure the wind we can say 1 of 2 things (depending on your style, both ways are correct). The first way is to measure the direction the wind is coming out of. For example, when we say we have a "north wind", we are technically saying the wind is coming out of the north. The second way is the measure the direction it is blowing. Using the wind from above, a north wind would be blowing south.
Wind speed we measure with a instrument we call a anemometer, we can use any of the speed units (MPH, KMPH, or Knots). Many meteorologists in the United States use Miles Per Hour for their speed unit, and ships out at sea use the unit Knots.
A funnel with a long stem (the straight part below the cone shaped part)
Advantage and disadvantage using meter stick vernier caliper and the micrometer caliper?
A meter stick caliper is very large and would make general measurements. A micrometer caliper is much smaller and can be used to make much smaller measurements.
What kind of tool is used to assist in drawing circles?
Most of the time, a tool called a "compass" is used to draw perfect circles. This compass is not to be mistaken with a directional compass.
How do you measure 2.0 meters on a measuring tape?
-- If you have a metric measuring tape, there's a mark at 2.0 meters.
-- If you have an "English" measuring tape, measure off 6feet6-3/4inches ; you'll be almost exactly right on.
Which caliper reading 019 or 030 is smaller?
Since the caliper readings are in reference to zero, a reading of 019 (or, more accurately, 0.019) is the smaller of the two. This reading is "nineteen thousandths of an inch".
What is the detector of nuclear radiation?
A radiac detects nuclear radiation. There are many types of radiac, some are: Geiger counter, ionization survey meter, scintillation counter, film badge dosimeter, electroscope dosimeter, electrometer, drift meter, cloud chambers, etc.
What is a dersciption for a steel rule?
A steel rule is most commonly refered to as an engineers rule.
What is the tool for measuring length?
ruler, yardstick, or meterstick
- A ruler or measuring tape ... mind you you can use anything as a tool to measure .... so long as you know the length of the tool you are using ...
Brake calipers are the hydraulic devices that wrap around the rotors and pinch the brake pads into the rotors when you stop.
How do you check radiator level on 1981 goldwing?
remove the false fuel tank. on the right side of the bikeyou will find the radiator cap open it with engine cold. fill with a 50/50mix of silicate free anti freeze and distilled water (not tap water). Run the bike until normal operating temp and top off with coolant mix. Replace raqdiator cap once the coolant levels off.
What does a micrometer looks like and how is it used?
Micrometer is a measuring device. And the measurement accuracy is 0.01 mm.
Object to be measured between the left jaw and screw it shut, and the size of the cache line read.
How do you get a piston in rear brake caliper to retract back into the caliper on a 2000 Mazda 626?
On the back of the caliper there should be a bolt its a 14mm you take it out and inside there is a bolt also its Allen key you use and Allen key and retract the caliper. it works on all 626 from 1994 till 2002
When there is to much resistance to retract the piston,
When the rubber piston(s) boot/seal is damaged/torn,
When the bleeder is broken/stripped,
How do you get the caliper piston to retract on a Mazda 323 1989 1.6 turbo?
According to your question I am assuming you are talking about the brake caliper. If so take the lid off of the the master cylinder. (where you put the brake fluid.) use your old brake pad and you will need a C-Clamp. Put the C-Clamp in the center of the old brake pad and tighten the clamp until the caliper piston can't go back any further. Put the new brakes on go back with installation. NOTE> DO NOT push the brake pedal while the top of the Master Cylinder lid is off. PUt The lid on then you can hit the brake pedal.
