answersLogoWhite

0

Volvo XC Cross Country

The Cross Country (XC) is a four-wheel drive manufactured by Volvo Cars from 1997 to the present. It is a rebadged variant of the Volvo V70. The XC is available as either a five-door wagon or a five-door crossover.

231 Questions

Volvo s40 2002 and check engine light and arrow?

If the check engine light and arrow light are illuminated on your 2002 Volvo S40, it typically indicates a potential issue with the vehicle's engine or transmission system. Common causes include faulty sensors, issues with the emissions system, or transmission problems. It's advisable to use an OBD-II scanner to retrieve any diagnostic trouble codes (DTCs) to identify the specific issue. Addressing the underlying problem promptly can help prevent further damage and ensure optimal performance.

How to change the cabin air filter on a 2008 Volvo XC70?

To change the cabin air filter on a 2008 Volvo XC70, first locate the filter compartment behind the glove box. Open the glove box and gently remove it by releasing the stops on either side. Once the glove box is out, you'll see the cabin air filter cover; unclip it and remove the old filter. Insert the new filter in the same orientation as the old one, reattach the cover, and replace the glove box.

How do you reset the temperature display to Fahrenheit on a Volvo XC90?

To reset the temperature display to Fahrenheit on a Volvo XC90, navigate to the settings menu on the infotainment system. Select "My Car," then go to "Settings" and look for "Units." From there, you can change the temperature unit from Celsius to Fahrenheit. Save your changes, and the display should update accordingly.

How do you reset message bulb failure position light Volvo V70 XC 2002?

To reset the message bulb failure position light on a 2002 Volvo V70 XC, first ensure that all bulbs are functioning correctly, including the brake lights, turn signals, and position lights. After confirming that there are no faulty bulbs, turn the ignition to the "ON" position without starting the engine. Then, press and hold the trip odometer reset button until the message disappears from the display. If the light persists, it may indicate a deeper electrical issue that requires further inspection.

On a Volvo XC90 2006 how do you switch the temperature display between Fahrenheit and Centigrade?

To switch the temperature display between Fahrenheit and Centigrade on a 2006 Volvo XC90, press and hold the "MENU" button on the center console until the settings menu appears. Then, navigate to the "Settings" option and select "Units." From there, you can choose between Fahrenheit and Centigrade. Confirm your selection to apply the changes.

Where is the position light on the Volvo xc90?

On the Volvo XC90, the position lights, also known as parking lights or side lights, are typically located in the front headlights and the rear light clusters. They illuminate when the vehicle is parked or when the driver activates the parking light function. To activate them, you can use the light control switch on the dashboard or the stalk on the steering column. Always refer to your owner's manual for specific instructions related to your model year.

I want to connect a backup camera to Volvo xc90 how to connect the camera to the reverse bulb?

Additional information will be required to answer your question. Is it an aftermarket back up camera and what year is the XC90?

Where do you buy a new headrest for passenger front seat for a 2003 PT Cruiser?

Went to the dealer, no one else had one. $154, have it in 5 days. Thanks!

== == == == Dealer?

Salvage Yard?

E-Bay?

What does sew on the gearshift center console on a Volvo v70 mean?

"s" for sport "e" for economy and "w" for winter depending on how you want the transmission to shift for the type of driving you do.

How do you know its time to replace brake pads?

Volvo brake pads do not have squeaking tabs on them except for the 2000-2004 S40. Regular inspection intervals are required to visually determine brake pads remaining thickness. Volvo recommends replacing the pads when there are only 2mm remaining. Once the pads wear completely away and start rubbing metal to metal the rotors must be replaced. Rotors have two minimum thicknesses also. One minimum is Pad Change Min which is the thickness usually about 0.8mm above absolute Min Thickness where the rotors will probably not be below the absolute minimum by the time the pads wear out. The absolute minimum thickness is usually stamped on the hub of the rotor and varies with the diameter of the rotors. Your local dealer can tell you what the thickness specifications are for your particular vehicle.