Construction

So...the residential construction industry is currently in a reccession and I have 1+ years as a superintendent for a Design-Build Firm. I was wondering what other profession would accept such experience. Thank you

Depends, what caused the damage, what types of coverage/policys do you or the contractor have? With additional info I can try to be of more assistance.

Typically used for overhead beams in residential home applications or can be laminated to create a larger dimensional beam for spanning overhead across larger distances when the architect calls for an "open" floor space. Applied with the rise of the beams (12" width) sitting vertically, evenly spaced across the ceiling and braced with cross bracing material and resting atop vertical walls. Creats structural rigidity and suppresses torsional force from both down force (the weight of the force from above i.e. a 2nd floor, roof and/or wind). Build a home with only walls and a roof and push down on it with any amount of force and you'll see, exhibited by the walls, a flex, a twist, then structural failure resulting in a collapse.

This is one of the main applications for DryFall. The only way to ensure a smooth and even painting surface is to spray. Rolling causes large amounts of drips and bleeds due to the perforations in the decking.

I believe DryFall requires an 8 foot drop before it dries. So for ceilings below that height or close to it be sure to use plastic drop sheets under the area and ensure to close off the area to foot traffic etc to avoid tracking the material hitting the floor. This stuff is like glue once it starts to stick to your boots so be sure to have lots of booties available for the workers applying the DryFall. They will appreciate it.

There are different concrete mixes and the will depend on which mix it is. The material ratio will remain the same whatever the volume is.

Construction machinery is any equipment used in the preparation of the site, construction and fitting out. used in building establishment, demolishing and carrying heavy materials. Their use is vital to save labour time, meet deadline and be able to minimise on cost

what is ditto in construction

Construction safety is the process of seeking to improve or maintain a safe work environment while people are building something like a road, bridge or other structure.

Nazca lines

A British merchant who manufacturers goods to India on boats

At the early stage of its construction only large size of unburnt bricks and plaster were used with wooden parasol (chatrayasshti).

Thereafter stones were used in making gateway (34 feet high) (2)

perpendicular line segment (apex)

Scaffold

The construction denies the states the power to:

Basically non combustible and fire resistive are the same. Difference is non combustible has steel frame members that are unprotected or limited protected. Fire resistive has protected steel frame members with a fire rated material such as concrete.

~APEX~ A parallel line through a point not on the line

There are many job-titles associated with building sites:- Manager, foreman, electrician, plasterer, glazier, roofer, carpenter, brick-layer etc etc....

to achieve fair finish surfaces, use wrought formwork made up of steel or iron

designer

Implied Powers

Yes the word construction is a noun. It is a common noun.

The Three Mile Island accident in 1979

You can get more insulation when using 2x6 studs rather than 2x4 studs

PPE stands for personal protective equipment. Hard hats, safety glasses, gloves, hearing protection, reflective safety vests, and steel toed shoes are a few examples.

Hello Daniel,

A month ago I hired "NYKB: New York Kitchen & Bath" for a full home remodeling. They did a pretty nice job with the kitchen and lobby. The only thing I didn't like much is the hall ceiling design, it is a bit lavish but everyone has a different taste. I recommend them to you. Good luck with your project.