BMW 3-Series

In the BMW Z3, the solenoid is typically located within the transmission assembly, specifically as part of the valve body in automatic transmission models. It controls the flow of transmission fluid and manages gear shifting. If you're looking for a specific solenoid, such as the shift solenoid, it may require accessing the underside of the vehicle or removing the transmission pan for inspection or replacement. Always consult the vehicle's service manual for precise location and procedures.

The BMW 745i typically requires synthetic motor oil that meets BMW's Longlife specifications, particularly BMW Longlife-01 or Longlife-04. The recommended viscosity is usually 0W-30 or 5W-30, depending on the climate and driving conditions. It's important to refer to the owner's manual for specific recommendations based on the model year and engine type to ensure optimal performance. Regular oil changes are crucial to maintain engine health.

On a BMW M3 E36, fuse number 48 is located in the fuse box, which is situated in the engine compartment near the battery. To access it, you need to remove the cover of the fuse box. Fuse 48 typically relates to various electrical systems, so checking the owner's manual can provide specific information on its function. Always ensure the ignition is off before checking or replacing fuses.

To set the clock in a BMW 320i, first, turn on the ignition or start the engine. Then, navigate to the iDrive system by pressing the "Menu" button, and select "Settings." Choose "Time/Date," where you can adjust the time using the dial or touchscreen, depending on your model, and confirm your settings. For older models, you may need to press the "Clock" button on the dashboard and adjust the time using the buttons provided.

The BMW 740i typically requires about 2 to 3 pounds of refrigerant for its air conditioning system, depending on the specific model year and configuration. It's important to consult the owner's manual or a service professional for the exact specifications and to ensure proper recharging procedures are followed.

For a 1989 BMW 325i with the M20 engine, the correct gap setting for the throttle plate is typically around 0.5 to 1.0 mm when the throttle is closed. This gap ensures proper idle and responsiveness. It's essential to check the service manual for any specific adjustments or tolerances that may apply to your vehicle. Always verify settings against manufacturer specifications for optimal engine performance.

The CCV (Crankcase Ventilation Valve) on a 1993 BMW 318i is typically located on the engine's valve cover. It can be found near the back of the engine, connected to the intake manifold and the crankcase breather hose. This component helps manage engine blow-by gases and prevents excessive pressure buildup in the crankcase. For specific access, it may require removal of certain engine components or covers.

To remove the rear door panel on a 2009 BMW 328i, start by carefully prying off the cover behind the door handle to access the screws. Remove any screws securing the panel, typically located near the handle and along the edges. Next, use a trim tool to gently detach the panel from the door, working your way around the edges. Finally, lift the panel upward to free it from the door latch.

In a BMW, you typically add water to the windshield washer reservoir, which is usually located near the back of the engine bay and marked with a washer symbol. For coolant, you should locate the coolant reservoir, often a translucent plastic tank near the radiator, and fill it with a proper coolant mixture. Always ensure that the engine is cool before opening any reservoirs to avoid injury. Consult your owner's manual for specific locations and instructions for your model.

To find the exact color code for your 1994 BMW 318 door panel, check the vehicle's service manual or look for a color code sticker, typically located in the driver's side door jamb or under the hood. You can also contact a BMW dealership with your VIN, as they can provide the specific color information. Additionally, you might consider using a color matching tool or app to compare and identify the color if you have a sample.

on the board in front of you there is two sticks, the first on the left will put your Km on zero , the second will help you to set the clock by rotating it to the left (this will decrease minutes) or to the right (to increase the minutes). if you press it you will change the clock from am pm to 24:00 .

Yes, the 1994 BMW 325i features a comfort relay, which is part of the vehicle's electrical system. This relay is responsible for controlling various comfort-related functions, such as the power windows, central locking, and possibly the sunroof. If you're experiencing issues with these features, the comfort relay might be a component to check or replace. Always consult the vehicle's service manual for specific details regarding the relay’s location and function.

To manually reset the service engine soon light on a 2000 BMW Z3, you can use the following steps: First, turn the ignition key to the "On" position without starting the engine. Then, press the gas pedal fully three times within five seconds. Finally, turn the ignition off, and the light should be reset when you start the vehicle again. If the light stays on, there may be an underlying issue that needs to be addressed.

Poly-

On his/her birthday in 2010 he/she would be 9 years old.

The voice on BMW navigation systems is typically that of an automated voice assistant, not a specific individual. The voice is generated by a computer program and is designed to provide directions and information in a clear and concise manner.

The yellow warning symbol is your traction control. It will come on temporarily if you have poor traction, or if you disable traction control by pressing the DSC button, it will stay lit until you turn traction control back on, or you turn the car off.

The most common places for coolant to leak on a BMW 325 are from the water pump, radiator, hoses, thermostat housing, and expansion tank. It's important to inspect these components if you suspect a coolant leak to prevent overheating and engine damage.

I also have a 2000 328i and my BMW mechanic suggested I purchase the Prestone 50/50 (green & water mixture). You can get it at Autozone or any other auto place. Fill it until the top of the float is even with the top of the resouvour container. It has worked just fine but make sure before you add it, that their isn't any OTHER color in there besides green (other color of course would be orange or pink/peach)

the fuel system might have air in the lines from running dry. try leaving the key in the ON position without trying to start it for a while which should let the electric fuel pump push fuel into the lines. then try to start the car. dont hold the starter on for more that 5-10 seconds in a half minute frame due to the danger of burning up your starter motor. if the engine starts, great! if not, keep reading.

try looking for blown fuses!

it may have trash in the fuel filter which can be blocking the flow of fuel. when you run out of gas in a vehicle that old, all the trash that has accumulated over the years can enter the fuel line, and cause blockage, and even stalling. if you replace the filter and it fixes the problem, then good. again, if not, keep on reading!

you may need to drain the tank and clean the screen on the pickup of the electric fuel pump. it is accesible by lifting up the rear seat cushon and pulling away the felt. please be smart when working with fuel tanks and gasoline! if you clean the screen and it helps, then great! i have a few more tricks if it doesnt, but you must email me for them.

modular_trash08@yahool.com

1987 325is

lighten car and or add more power,

do what ever you feel is to get your vehicle light as possible.

add more power. your engine is already pretty efficient so adding power will be about how much money you want to spend, i would highly recommend to use dinan parts, find a BMW dealer ship that is dinan certified and you can have blowers, cams, thorttle bodies, software, there are many different things you can do to add more power, it all depends on how much money you want to spend for speed.

If you are in front of the car, there should be alittle grey tab on back of each of the corner lamps. you have just enough room to push the little tab on each side outwards to release. be careful not to break the tabs though because they are only plastic. Once it has released the tab, pull the corner lamp forward toward you. remove light by pressing the little tabs on the connector toward one another and pull the light out.