answersLogoWhite

0

📱

Computers

This category includes questions and answers about computers and everything related to computers.

48,002 Questions

What exam you have to write to do ME at Anna University?

The exam that you have to write to do ME at Anna University is called TANCET. That stands for Tamilnadu Common Entrance Test which is an eligibility examination.

Can you get photos from your razor phone to the computer?

yes you can. first get a bluetooth device and find the bluetooth link on your phone, turn it on and the bluetooth menu on the computer should say you are on. then just double click on your name on the menu and you should be able to see all kinds of information from your phone.

How do you find out whether there are any WiFi hot spots in a specific country?

If you google the keywords " "WiFi hot spots" "name of the country" it would give you a list of places and sites for that particular country

3 element of computer?

3 elements of computer?

1st: CPU is the most important component of the computer without it a computer is like a car with no fuel. It also known as the brain of the computer it has two Parts ALU & CU. ALU (Arithmetic & Logic Unit) performs different arithmetic and logical operations. Whereas CU (Control Unit) controls & co-ordinates different components.

2nd: Main Memory is another important component of the computer. A computer needs a memory during processing where data can stored. This memory is RAM (Random Access Memory) which is also called the working area of computer. Data is fetches by system buses from CPU to RAM.

3rd: I/O (Input & Output) devices are those part of computer which are necessary for giving instructions to the computer and receiving information/result from computer. these are keyboard, mouse & monitor etc....

Is the octal number system used for business dealing in Pakistan?

the octal numbering system is not used for dealing it was once used for computers but has been replaced with binary and hexadecimal because of its complexity and how it does not relate to binary at all hexadecimal and binary go together way better...

What is the meaning of hospital management system?

this is completely for gods sector. do what you say, serve to gods creative equal for serve to god.

What is technique for framing arch top windows?

For arch top windows you need to figure the peak(top) and spring point(height at which the arch starts on the sides. If you have the window where you can scribe the contour on the plywood that will be much easier. Typically the window flange will be slightly smaller on the inside of the house, which we will account for a bit later. Usually arch top windows will be a half round. To draw the arch you will need to mark out the plywood to fit inside the window frame. after you have done this, mark the canter of the width on top and bottom if the plywood. Use the measurement for the outside of the window. secure the plywood to the ground with some concrete nails or what have you. Snap a line with a chalk line starting at your center mark on the top of the plywood and extending several feet past the bottom of the plywood making sure that it lines up with the center mark on the bottom of the board. From the peak of the arch, extend a tape measure along the line you have just snapped. Take another tape measure and extend it from the spring point mark on one of the sides of the plywood. The point at which the tape measures intersect at the same number will be your pivot. Mark and tack a nail at this point or have a helper hold the end of your tape measure or chalk line on the pivot point. Take a pencil and start at one spring point marking while holding the pencil against your tape measure on that same point as you scribe the half circle. Now cut it out using a jigsaw or walking your circular saw around the contour if you have the skill. Scribe another arch by either repeating the process or scribing from your cutout. Cut 2x4 blocks at the width of the framed wall minus 1 1/8 inches to account for the plywood assuming you are using 1/2 inch of course. Cut boards the length of the top of the plywood and the length of the sides of the plywood minus roughly 6 inches to allow space for the blocks on the bottom. Rip these deadwood boards to a width that matches the length of your blocks. Using a staple gun, staple the plywood to the deadwood starting with the top and then the sides. Place your blocks under the arch portion and staple them with the contour leaving 1/8 inch gap to account for expansion cause by fluxuation of heat and humidity. If the window is already installed, set the arch in place and use a framing nailer (3" nails) to nail the deadwood to the window frame while making sure that the plywood side is flush with the other framing. Set the other plywood side in place and staple it to the blocks. You should have a gap on the inside flange that will need to be filled to meet code. Rip down a piece of 1/4" birch plywood 1/2" wider than the distance from the outside of framing to the window flange. Bend the plywood into place and staple it to the blocks. Cut holes in plywood on the inside of the arch that you can fit your hand into so that it can be insulated. Wrap the exterior plywood with tyvek or a similar vapor barrier. Using Great stuff or a similar spray foam specifically for windows and door, seal any gaps between the window and framing. You should now be finished with the framing stage.

How comes you cant get mr game and watch in Super Smash Bros Melee i have done classic and adventure mode with all the characters?

If I remember correctly, you have to beat the target test with everybody. If that doesn't work, there's a cheat which lets you get a new character always, but I don't remember what that is. Somebody else probably does.

How do you make ure profile super short?

ok umm if u want to hide everything interests sections and about me section..just look for the code hide interests then look for hide about me section(its includes who id like to meet) if u want to make it short but with stuff in it look for a layout that is already made like that or put small stuff and hide the rest..look for codes that hide friends music player details ETC...

How do I delete the sample music on my Zune?

Click on the song you want to delete on your zone , double tap on it and then a prompt will ask you if you want to delete and then click yes.

What is the S switch used for with the Format command?

The /S switch stores the system files on the disk after formatting. Writes the two hidden files and Command.com to the disk, making the disk bootable. Not available under Windows 2000/XP or Windows ME. The /V switch allows you to enter a volume label only once when formatting several disks. The same volume label is used for all disks. A volume label appears at the top of the directory list to help you identify the disk. The /Q switch re-creates the root directory and FATs if you want to quickly format a previously formatted dist that is in good condition. /Q does not read or write to any other part of the disk. Comp TIA A+ Guide to managing and maintaining your PC, 6th Edition, Chapter 15, page 764. The /S switch stores the system files on the disk after formatting. Writes the two hidden files and Command.com to the disk, making the disk bootable. Not available under Windows 2000/XP or Windows ME. The /V switch allows you to enter a volume label only once when formatting several disks. The same volume label is used for all disks. A volume label appears at the top of the directory list to help you identify the disk. The /Q switch re-creates the root directory and FATs if you want to quickly format a previously formatted dist that is in good condition. /Q does not read or write to any other part of the disk. Comp TIA A+ Guide to managing and maintaining your PC, 6th Edition, Chapter 15, page 764.

How do you rest bios Toshiba p100-160?

The BIOS of a Toshiba P100-160 notebook can be reset used using a system BIOS flash utility which can be obtained from Toshiba service centers. It can also be done by shorting the terminals of the computer's CMOS battery.

Do you have a jumping move code in build-a-bearville?

no there isn't a code you just go to the town square and you click on bearemy ( he is the one that is standing outside the bear shop ) then you get the star jumps.

What does peopleware stands in computer studies?

In computer technology terms, there are 3 main branches. First is hardware which is all about the physical device and accessory of the computer like for example the monitor and the hard drive. Second is software which pertains to programs and instructions needed for the computer to function. One good example is the Windows operating system. And third is Peopleware which refers mainly to the role of people in the development or use of computer hardware and software. This can include the programmers, engineers, manufacturers, software designers, developers and testers, and all other human actions directly involved with computers.

How do you create your own flash games?

You need to use the software Adobe Flash.

Unfortunately this software is not free, and is priced ridiculously, but you can get a 30 or so day trial, with no restrictions.

To download, go to the Adobe website and click the Flash button (NOT flash player), and then download it from there. There are also alot of tutorials online, just google Adobe Flash tutorials.