Consumer Electronics

electronegativity

If the messages are saved on the memory of the phone itself, you can still view your old messages. Some carriers allow you to save your data on an internet-based cloud.

The only way that eating dirt can kill you is if it contains artificial or naturally occurring poisons. Dirt itself is completely harmless, unless you eat enough to cause a bowel obstruction.

Cobra walkie talkies have different ranges depending on what model you purchase. Some models state that they have ranges up to 16 miles while the top of the line model has a range up to 30 miles.

Should be a small white button down toward the battery. It is very small and says dst above it. Just push the button to adjust for day light savings time.

two hrs

Factor them.
2 x 2 x 3 = 12
2 x 2 x 2 x 2 = 16
2 x 2 x 2 x 3 = 24
Combine the factors, eliminating duplicates.
2 x 2 x 2 x 2 x 3 = 48, the LCD

its having a girlfriend that's a magnet.................................................

Sources with different voltages should never be connected in parallel, you would have a difference of potential. Any time you have a difference of potential connected together you will have sparks, which could cause the batteries to explode.

you should look at www.clickerdepot.com they have a lot of products at really good prices.

It is very easy to use a photocopier. You just place any document that you want to duplicate on the screen and then make the number of copies that you prefer. This is a machine for duplicating documents.

to make 1 oil 1 oil 2 bateries then robotics

The Azure Flute was never an event given out, but here's an Action Replay code for Pokemon Platinum.

94000130 fcff0000

62101d40 00000000

b2101d40 00000000

0000b5d4 0000000a

0000b5d8 00000000

d2000000 00000000

Talk to a man in green in the Pokemon Mart to get it and go to Spear Pillar.

4-20ma is a standard range used in process controls to indicate measured values. For instance, a pressure instrument may output 4ma to indicate 0 psi, up to 20 ma to indicate 100 psi, or full scale. Or, to control a variable-speed motor drive, 4 ma may mean to stop the motor, and 20 ma to run at full speed. The reason that 4ma is chosen instead of zero is for fail safe operation. A broken wire always results in 0 ma. Suppose our signal right now is 12 ma, and this causes a ventilation fan to run at 50% speed. Suddenly the signal drops to 0 ma. Now, if our range was 0-20 ma, does this change mean stop the fan? Or does it mean the signal wire just broke? There would be no way to tell. With a 4 ma low range, we would know that 0 ma was a broken wire. Then instead of stopping the fan, we could set it to some default speed, or simply continue at the previous speed until the wire was repaired.

speed 300.000 meters peer second

with frecuency of 1.000.000+ GHz(or more)

Because it's just not made for the PSP. Actually, Advance Wars is the intellectual Property of Nintendo, not a third party which is why it is made for the Nintendo systems ie. game boy advance, Nintendo DS, DS lite DSi etc... only. Nintendo seldom if ever licenses thier games (IP's) to other platform developers. Intellectual properties or games are designed and sold to sell the hardware (the handheld gaming device) and in this case Nintendo is using thier own game Advance Wars to sell the system they themselves have created The GBA, DS Lite etc.. Nintendo doesn't want to sell more SONY Products, they want to sell more NINTENDO Products, which is why you will never see Advance Wars on the PSP (legally). There never have been talks between the two competitors, Sony and Nintendo to bring the series to the other platform, something almost unhead of in the gaming industry, I did say ALMOST unheard of. there have been a some IPs such as Sonic, usually appears under NIntendo, now appearing under Microsoft or PSP license but that's because Sonic is a third party and has no stake in on handheld doing better than the other.

Meditation. If you want to know a bit more about meditation, I suggest you read Ajahn Sumedho's 'Mindfulness - the Path to the Deathless'.

OMG CUZ ITS SO AWESOME =D

1. Silicon is opaque to all light (IR through UV).
2. The bandgap of silicon is not high enough to produce visible photons, only IR photons.

I was tryin to do the same research, just happened to hit on this question. Here are few things that would help you decide if you want a wired / wireless spkr - If you willing to compromise on quality, you could try Wireless. - Not worth the efforts to get it wireless, wireless technology has not yet evolved to a state that can give you Quality on wireless connection (esp if you are lookin to make a home theater system wireless, i think you are) - Wireless cannot transfer power to run your speaker, so only audio is sent thru wireless, the speakers are to be wired for power anywayz. (Battery power willnot last you too long) --- After reading reviews on the same, looks like you are better off with Wires than wireless.. Here is a solution, if you really wanna go wireless (never tried, so dunno about the outcome, the site claims that it works) Check their products received and transmitter, should work for you! http://www.soundolier.com/products/maestroSWR.aspx

Ideally, with an average MP3 file size of 4MB per song (128 Bit Encoding), a 2GB card should be able to hold close to 500 songs.

It could be that the song files have been encoded for high quality sound production (320 Bit), which results in the file size being more. Or is it that they are in WAV format?

WAV format are a copy of the audio CD format. They usually are very heavy in size with the average size running uwards of 100mb per song, thereby taking up more space and as a result, you would not be able to store many songs onto the 2gb card.

Solution: Use a MP3 converter to convert the song files into Mp3 with the 128 bit encoding. this bitrate is perfect for listening to music and the sound quality is also very similar to what you would get on an audio CD.

A zener diode, a transistor, a rectifier diode, and a few resistors. A 10.5V zener diode will conduct until the voltage across it drops to below 10.5. If the relay is small enough, a zener diode is all you need. However, more than likely the current draw of the coil would burn the zener out. Use the zener to drive a transistor, and use the transistor to trigger the relay. V+ | |_______________________ | | _|_| _____|___ |/ \ 10.5V | | /___\ | 3 Relay | __|__ 3 Coil | / \ 3 0---------- /___\ 3 | | | 3 \ \ 4.7K | | / 2.2K / |____ ___| \ \ | / / | | | B | / C | |________|/ | |\ 2N2222 | | \ | | E |______________________| | _|_ \\\ When the voltage is above 10.5V the zener will conduct ant turn on the transistor. The transistor will power the relay. When the voltage drops below 10.5V the zener will stop conducting, shutting off the relay. The rectifier diode absorbs transients caused by the field breakdown in the coil, protecting the transistor. Just a plain resistor will do it or you may follows suggestion and use a computer to do that. The last time i used those ancient devices i find out they operate as a current device like minimum pull in current source. So a passive resistor in series will insure the minimum pull in source however it could be higher then the 10.5 v you need.The above designi just plain silly.

it needs batteries to power the diode. just like your house needs big powerplant batteries to turn on ur lights. :P