answersLogoWhite

0

Dodge Vans

Dodge has been producing panel delivery models for several years since 1914. However, its first purpose-built van model was launched in 1964 – the compact A Series. The carmaker then released the B-Series, followed by the rebadged Ram Van and Ram Wagon.

462 Questions

What are the 1977 dodge 360 engine timing specifications?

The 1977 Dodge 360 engine typically has a timing specification of around 5 degrees BTDC (Before Top Dead Center) for initial ignition timing. The timing can vary slightly based on the specific application and whether the engine is equipped with a vacuum advance distributor. It's important to consult the vehicle's service manual for the exact specifications and any adjustments based on the specific setup or modifications. Always ensure the engine is at operating temperature and the timing is checked with the proper tools for accuracy.

Where is the fuse for 1996 dodge ram 2500 conversion van?

The fuse box for a 1996 Dodge Ram 2500 conversion van is typically located under the dashboard on the driver's side, near the steering column. There may also be an additional fuse box located in the engine compartment. For specific fuse locations and functions, refer to the owner's manual, which provides a diagram and detailed information. Always ensure the vehicle is turned off before checking or replacing any fuses.

Where is the horn relay on a 1976 dodge b200 van?

In a 1976 Dodge B200 van, the horn relay is typically located on the driver's side of the engine compartment, near the battery or the fender. It may be mounted on the inner fender or attached to the firewall. To locate it, look for a small rectangular or cylindrical relay with electrical connectors. Always refer to the vehicle's service manual for precise locations and specifications.

Where is the obd plug on a 1995 dodge b2500 van located?

The OBD (On-Board Diagnostics) plug on a 1995 Dodge B2500 van is typically located under the dashboard, near the driver's side. You can usually find it above the brake pedal, close to where the steering column meets the dash. It may be necessary to remove a cover panel to access it.

Need a radio wiring diagram for 1996 Dodge Grand Caravan?

For a 1996 Dodge Grand Caravan, the radio wiring diagram typically includes the following color codes: the constant power wire is usually yellow, the ignition power wire is red, the ground wire is black, the left front speaker wires are gray (positive) and gray with a black stripe (negative), and the right front speaker wires are white (positive) and white with a black stripe (negative). You can find detailed diagrams in the vehicle's service manual or by checking online automotive forums and resources. It's always a good idea to double-check connections with a multimeter before finalizing your installation.

Dodge Van spare tire speed limit?

The speed limit for a spare tire on a Dodge Van is around 45 miles per hour. The spare tire should not be left on the van for normal driving.

Where is the Crankshaft position sensor located on a 1991 Dodge B250 van 5.2L engine?

Right side rear of engine in top of bell housing, behind cylinder head, two wires going to it.

What is a pcm and what does it do on a 1990 B250 Dodge van?

Powertrain Control Module

It's the computer mounted to the firewall with the three sets of wires going to it. It handles all sensors, warning lights, transmission shifting (if electric), spark ignition, electronic choke..... Pretty much everything electric is handled by the PCM.

Where is the coolant temperature sensor on a B250 dodge van 1997?

The coolant temp sensor is located next to the thermostat housing.

What kind of generator is suitable for a 5 berth caravan?

For a 5 berth caravan, a portable inverter generator is typically the most suitable option. These generators are lightweight, quiet, and provide clean power, making them ideal for running sensitive electronics and appliances like fridges, lights, and chargers. Aim for a generator with a power output of at least 2000 to 3000 watts to ensure it can handle your power needs comfortably. Additionally, look for models that are fuel-efficient and have a good runtime to maximize convenience during your travels.

How do you fix Error code 5 5 for a 1997 dodge van?

55 code is not an error code, it signals end of codes. If no other codes preceded it, you have no error codes.

Does horse power increase when the engine is bored 40 over?

Slightly. Adding dome top pistons would increase it more.

How do you know if you have 2 wheel abs or 4 wheel abs on your 1994 Dodge van?

fun way grab a buddy and a dirt lot 20 mph and lock brakes have him see if front and rear tires lockes up. Safer way lift vehicle check for wiring headed toward inner hob of front and rear wheels wiring means ABS, both ends 4 wheel ABS

1973 dodge Class C Motorhome how can you tell what engine it has in it?

B3 0 B F 3 V 013599

B3 is the Model code = B-300

0 is the Body Style = Camper Vans(MB300 Front Section)(1973), Forward Control&Motor Home Chassis, Incomplete chassis, CB300 Kary Van, Sport Utility

B is the Gross Vehicle Wt = 6,001 lbs to 10,000 lbs

F is the Engine Code = 360

3 is the Model Year = 1973 J Series

V is the Assembly Plant = Warren Truck Compact

013599 is the Sequence Number = the 13599th unit built

Source: http://www.classicwinnebagos.com/forum/tech_resources/VIN_decoders/DodgeVINdecoder.html scroll down 'til you see your year.

Happy New Year, Brian

Why is no power getting to the coil on an 1989 Dodge Van?

I don't know if there is a fusable link! This is what I did. I lifted the glove box out and next to the fusebox is a flat black box (3" x 5" x 1 "), probably the electronic ignition. I unplugged it and replaced it. Further I replaced the relays (3 of them under the hood). one is located directly beside the smec computer, one is a metal relay in the middle of the firewall and the other is in between the brake booster and the batterie. I tried it again and it works. the other way is, run a wire from the batterie to the pos side of the coil (to supply power). pull one of the sparkplug wire of and stick another sparkplug in it and lay it on top of the valve cover. Crank the motor over and see if the sparkplug sparks (this is to check your coil working properly!)

Where is located the coolant sensor on a 5.9 liter dodge van?

The coolant temp sensor is located next the the thermostat housing.

How can you convert a 1970 A-108 318 from conventional ignition to electronic?

At that time several after-market conversions were available. You only need to find one of those and the conversion process shouldn't be terribly difficult. ---------------------------------------------------------------------------------------------- Considering the costs involved if there is a problem with the electronic ignition, I'd stick with the easy to trouble shoot and cheaper to repair distributor point system.

Do you have to take out half of engine to replace water pump to 98 dodge carven v4?

The front does have to be dissassembled to access the timing belt, which drives the wate pump.

Is there a relay that turns the dome lights on and off on a 1999 Dodge full size van?

Hey Dude: You can turn your dome light off in your van by turning your headlight switch (or dimmer switch ) all the way to the right. Left turns on your dome light, so go the opposite all the way till it clicks. It will now stay off when your door opens. .

Where is the mass air flow sensor on a dodge B250 van 5.2L?

A Dodge B250 Van does not have a mass airflow sensor.

Where is the start run relay located on a 1989 dodge 250 van?

It's located on the driver's side fender near the strut tower.

Rick

I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com