0
Engineering
Engineering is an art and profession devoted to designing, constructing, and operating the structures, machines, and other devices of industry and everyday life.
5,839 Questions
Where is the drive plate on a lathe?
Using a drive plate on a lathe requires removing the chuck and the drive plate is attached in its place onto the spindle.
The technology used in genetic engineering on animals is roughly called animal engineering
Any one from chennai got npcil 2010 interview on oct5 at mumbai?
Hi,
I to got the interview call from NPCIL. But it is on 6th Oct.
What will be the pattern of Interview?
Will it be based upon Technical side or Subject side?
What is your qualification (PG, UG, Phd )& do u have experience ?
hi i my intrvw dt is 5thoct ...any info mail purush.porus@gmail.com
What are three factor that influence tactical planning for halliburton?
Goals, policies, and procedures
How do you use a hydraulic torque wrench?
It is just simple, find the exact socket for the bolt-nut, once fixing them just hit the button for progress. There might be several press as per the requirement. Setting the torque range is really very important. You need to select the required range by selecting them pressure table provided with the wrench. Choose the exact pressure required and proceed further. This is highly enough to know how to use a hydraulic torque wrench.
How is natural gas purified by amine process?
Amine Treating uses alkylamines to remove hydrogen sulfide and carbon dioxide from natural gas. This type of process is refered to as a sweetening process since it removes sour gases such as mercaptans and hydrogen sulfide. Some common amines used are Monoethanolamine (MEA), Diethanolamine (DEA), Methyldiethanolamine (MDEA), and Diisopropylamine (DIPA)
What is the definition of bearings?
There are many definitions, but this one is probably the one you want.
5 Architecture a structural part that supports weight, such as a wall that supports a beam.• the point at which a structural part rests upon a supporting structure, such as the specific area of a beam that rests upon a wall.
What was the first city to be leveled by a plutonium-base atomic bomb?
There have only been two.
So far.
The first was Hiroshima.
What is the world's greatest engineering marvel that was designed by Alexandre Gustave?
Alexandre Gustave Eiffel. He was the main man behind the Eiffel Tower, built in 1889.
it is a strong device to keep lots of light items hold.
Also it when there is lots of different parts of the structure but they are together. Also when there is something that helps support the whole thing. Like think of a bridge there are lots of parts and strong can hold lots of things also more than one part but it is together.
Does a 2002 Dodge Intrepid use gear oil?
Of course.... the differential / transaxle uses a Mopar 75 - 90W Hypoid Gear oil
The BE assists commanders and functional managers in identifying, evaluating, and classifying all confined spaces; assists the functional manager in identifying training for testers and monitors, entrants, and entry supervisors on confined space duties; trains unit personnel on the atmospheric testing and monitoring of confined spaces.
What does the number 12.9 mean on a bolt?
12*10=1200 is minimum tensile strength
90% of 1200 i.e. 1200*.9=1080 is elongation yield limit
units are N/mm2
Have they made a projector that projects upward?
There are a number of projectors that can be mounted vertically. It is important to ensure that the cooling system will operate correctly and the manufacturer will be able to advise.
Any projector can be used to project vertically by using a mirror in front of the lens. With the projector horizontal, a mirror at about 45 degrees will direct the image upwards or downwards. The mirror will need to be mounted firmly to avoid slippage and vibration.
Although any mirror can be used, it should ideally be a front silvered or first surface mirror. This type of mirror reflects light on the front surface and avoids a ghost reflection caused by the front and rear surfaces of the glass both reflecting light. An audio visual system integrator may be able to supply mirrors, mounting frames and installation guidance.
What materials of the Blades is? If you need to grind Tungsten Carbide Blades, the Diamond Grinding-wheels should be your Best Choice. If you need to grind High Speed Steel Blades, Alloy Steel Blades or other steel blades, CBN Grinding-wheels should be your good choice. YingLong SuperHard Materials Manufactory is factory of Typed Grinding-wheels.
Yes, it will rust unless it is protected with paint, plastic or oil.
What is the role of maths in engineering?
which field?civil engineering:
must calculate how much strength a straight bar will bear (like a bridge)
before breakage. How much weight can a cable of x amount of strands take before it puls apart.
Electrical engineering: 20 gauge wire can carry x amount of current, with a loss of y over z distance.
How much wire of that size can you lay before you lose too much current for said circuit.
Mathematics is core to every engineering field.
There are a hundreds of applications. for example:
1- modeling and study of electric circuits using mathematical differential equations of first, second and higher orders.
2- the design of system such as filters using Laplace and Z transforms.
3- mechanical applications for motion using special equations.
If this information is not enough then you have visit maximum websites and collect the answers
also it you want more do to (http://docs.google.com/gview?a=v&q=cache:vAW15kzibnEJ:vxu.se/msi/picme10/F1LT.pdf+role+of+mathematics+in+engineering&hl=en&gl=in&sig=AFQjCNG_CsB005fxCbnTawNWtcH6BXlweA)
copy and paste may be this information useful for u
Thankyou.
Engineering school offered lowest tuition fee in the Philippines?
its either pup,up or ust for private
What is shear lag in a box girder?
A delay or slow response in developing shear flow reactions to applied loads
Maneuvers are actions that are clever and skillful in nature. In military science, these are strategic and tactical movements done by experts.
How many kilometres can a Boeing 747 glide without fuel?
The 747 has about a 17 to 1 glide ratio. If we figure a cruise altitude of 42,000 ft. (8 miles). Then a 747 in cruise could glide 136 miles. Assuming that the landing area is at sea level. Even if cruise alt is a bit lower, its reasonable to say a large commercial airliner at cruise altitude can glide somewhere around 100 miles.
