answersLogoWhite

0

Harley-Davidson Motorcycles

Harley-Davidson motorcycles are noted for their heavy customizations that bring about the chopper style of motorbikes. Distinguished by their frame, suspension and engine, Harley-Davidson motorcycles may belong to one of the five model families: Touring, Sportster, Dyna, Softail, and VRSC.

4,356 Questions

How do you test primary resistance on a 3.0 ohm coil?

To test the primary resistance of a 3.0 ohm coil, use a digital multimeter set to the resistance (ohm) setting. Disconnect the coil from any power source and the circuit to avoid inaccurate readings. Place the multimeter probes on the coil's terminals; a reading close to 3.0 ohms indicates the coil is functioning properly. If the reading is significantly higher or lower, the coil may be faulty and should be replaced.

What is vtl 1200c?

The VTL 1200C is a high-precision vertical turning lathe designed for machining large and heavy workpieces. It features advanced CNC technology for enhanced accuracy and efficiency in manufacturing processes, making it suitable for industries such as aerospace, automotive, and heavy machinery. With its robust construction and versatile tooling options, the VTL 1200C can handle various materials and complex geometries.

Will a 150mm tire fit on a 2001mod harley Davidson fat boy?

A 150mm tire is generally too wide for a 2001 Harley Davidson Fat Boy, which typically comes with a rear tire size of 200mm. Installing a 150mm tire may require modifications to the wheel, swingarm, and fender clearance. It's best to consult a motorcycle technician or refer to the owner's manual for specific tire compatibility and safety considerations.

How do you tighten the tail light bar on a Harley Davidson road king?

To tighten the tail light bar on a Harley Davidson Road King, first, ensure the bike is securely parked and off. Locate the mounting bolts on the tail light bar, typically found on the sides or underneath. Use the appropriate wrench or socket to tighten these bolts, ensuring not to overtighten and risk damaging the components. Finally, check the alignment and functionality of the tail light to confirm everything is securely in place.

How to change the transmission oil in electra glide?

To change the transmission oil in a Harley-Davidson Electra Glide, first ensure the motorcycle is on a level surface and the engine is warm. Remove the transmission drain plug and allow the old oil to fully drain into a suitable container. Replace the drain plug and fill the transmission with new oil through the fill hole, using the recommended type and amount specified in the owner’s manual. Finally, check the oil level and ensure there are no leaks before taking the bike for a short ride to circulate the new oil.

What glue to use on motorcycle grips?

For motorcycle grips, it's best to use a strong adhesive like contact cement or a specialized grip adhesive, which is designed to withstand vibrations and temperature changes. Some riders also prefer using grip glue or spray adhesives specifically formulated for rubber and foam materials. Avoid standard super glue, as it may not provide the flexibility needed for grips. Always ensure the surfaces are clean and dry before application for optimal adhesion.

How do you check the oil level on a 2001 Low Rider Harley Davidson?

To check the oil level on a 2001 Low Rider Harley Davidson, first, ensure the motorcycle is on a level surface and the engine is warm. Remove the dipstick from the oil tank, wipe it clean, and then reinsert it without screwing it back in. Pull it out again to check the oil level; it should be between the two marks on the dipstick. If necessary, add oil to reach the proper level, but avoid overfilling.

What size screw on a 2006 dyna wide glide bracket for the battery?

The battery bracket on a 2006 Harley-Davidson Dyna Wide Glide typically uses a 1/4"-20 screw. It's important to ensure that the screw is of the appropriate length to secure the battery properly without being too long, which could damage the battery or bracket. Always check the specific part manual or consult a dealer for the most accurate information.

What does VL stand for in Harley Davidson twin engine?

In the context of Harley-Davidson's twin engines, "VL" refers to a specific model designation used for their V-twin engines produced in the 1930s. The "V" indicates the V-twin configuration, while the "L" signifies a particular engine series that was known for its larger displacement and advanced features for its time. The VL model was notable for its performance and helped solidify Harley-Davidson's reputation in the motorcycle industry.

What does a 96 cubic inch harley motorconvert to in cc?

A 96 cubic inch Harley motor converts to approximately 1,573 cubic centimeters (cc). To convert cubic inches to cc, you multiply by 16.387, so 96 cubic inches multiplied by 16.387 equals about 1,573 cc. This conversion is often used to compare engine sizes in different measurement systems.

How do you remove instrument panel 1993 electra glide?

To remove the instrument panel on a 1993 Electra Glide, first disconnect the battery to ensure safety. Next, remove the screws or bolts securing the panel, typically located around the instrument cluster. Carefully disconnect any wiring harnesses attached to the back of the panel. Once all fasteners and connections are removed, gently pull the panel away from the motorcycle.

How much Lucas oil stabilizer should go in a Harley engine?

For a Harley engine, it's generally recommended to add Lucas Oil Stabilizer at a ratio of about 10-20% of the total oil capacity. For example, if your Harley engine takes 4 quarts of oil, you could add approximately 0.4 to 0.8 quarts of the stabilizer. Always consult your owner's manual or the product guidelines for specific recommendations tailored to your engine type and conditions.

Who makes harley Davison SYN 3 oil?

Harley-Davidson SYN3 oil is manufactured by Harley-Davidson itself. It is a premium synthetic motor oil specifically designed for use in Harley-Davidson motorcycles, offering enhanced performance and protection for the engine, transmission, and primary chaincase. This oil is formulated to meet the unique demands of Harley-Davidson engines and is part of their official line of maintenance products.

How do you adjust the clutch on a 2003 Harley Davidson Road king?

To adjust the clutch on a 2003 Harley Davidson Road King, start by locating the clutch adjustment screw on the primary cover. Loosen the lock nut, then turn the adjustment screw clockwise to increase tension or counterclockwise to decrease tension until you achieve the desired lever free play, typically around 1/8 to 1/4 inch. Once adjusted, tighten the lock nut securely and test the clutch lever for proper engagement and disengagement before riding. Always refer to the owner's manual for specific torque values and additional details.

Dose a 99 Harley Davidson dyna super glide have a lay down switch?

Yes, the 1999 Harley-Davidson Dyna Super Glide is equipped with a lay-down switch, also known as a tip-over switch. This safety feature is designed to cut off the electrical system if the motorcycle tips over, preventing fuel leakage and electrical issues. It's an important safety mechanism for the bike. If you're experiencing any issues related to this switch, it's advisable to consult a technician.

How do you change the oil in a 2009 harley 883?

To change the oil in a 2009 Harley 883, first, warm up the engine slightly to thin the oil, then turn it off and let it sit for a few minutes. Place a drain pan under the oil pan, remove the drain plug, and let the old oil completely drain out. Replace the drain plug, remove the old oil filter, and install a new one. Finally, fill the engine with fresh oil through the dipstick tube, ensuring you use the correct type and amount specified in the owner's manual, and check the oil level before starting the engine.

How do you remove and install speedometer and tach cushions on a 1985 fxrs harley?

To remove the speedometer and tach cushions on a 1985 FXRS Harley, start by unscrewing the retaining nuts or screws that hold the instruments in place. Gently pull the speedometer and tachometer out of the housing, being careful not to damage any wiring. To install new cushions, place them in the designated slots and reinsert the instruments, securing them with the nuts or screws. Ensure everything is aligned properly and test the instruments for functionality before finalizing the installation.

How do you adjust a clutch cable 2003 harley Davidson fat boy?

To adjust the clutch cable on a 2003 Harley Davidson Fat Boy, first locate the adjustment screw on the clutch lever at the handlebars. Turn the adjustment screw counterclockwise to increase slack or clockwise to reduce slack until you achieve about 1/8 inch of free play at the lever. Additionally, check the lower adjustment near the transmission, if necessary, ensuring the cable is properly tensioned throughout. After adjustments, test the clutch operation to ensure smooth engagement and disengagement.

How much oil do you put in a 2001 harley Davidson softail?

For a 2001 Harley Davidson Softail, the engine typically requires about 3.5 quarts of oil during an oil change, including the oil filter. It's important to use the recommended type of oil, usually a 20W50 motorcycle-specific oil. Always check the owner's manual for exact specifications and to ensure proper maintenance.

How do you change front fork seals on a rm125?

To change the front fork seals on a Suzuki RM125, first, remove the front wheel and brake caliper, then loosen the fork clamps and slide the forks out of the triple tree. Use a fork seal driver or a similar tool to remove the old seals, clean the fork tubes, and install the new seals carefully. Reassemble the forks, ensuring they are properly filled with oil to the correct level, and then reattach them to the bike, tightening the clamps securely. Finally, reinstall the front wheel and brake caliper.

Where is the trans drain plug on a 2007 street glide?

On a 2007 Harley-Davidson Street Glide, the transmission drain plug is typically located on the bottom of the transmission housing. It's a hex head bolt, usually found near the rear of the transmission. Be sure to use the correct size socket or wrench to avoid stripping the plug, and always have a drain pan ready to catch the fluid when you remove it.

What is the gap on the spark plug for 1994 softail heritage harley Davidson?

The spark plug gap for a 1994 Harley-Davidson Softail Heritage is typically set at 0.040 inches (1.0 mm). It's always a good idea to check your owner's manual or service manual for the specific model to confirm this specification. Proper gap adjustment is crucial for optimal engine performance and efficiency.

Where are the fuses on a 2004 road king classic?

On a 2004 Harley-Davidson Road King Classic, the fuses are located in the fuse box, which is typically found under the seat. To access the fuse box, you'll need to remove the seat by unscrewing the bolts or releasing the latch. Once the seat is removed, you will see the fuse box, which contains various fuses for different electrical components of the motorcycle. Always refer to the owner's manual for specific fuse locations and ratings.

Will a 2007 road king seat fit a 2009 street glide?

A 2007 Road King seat will not fit a 2009 Street Glide without modifications. While both models are part of Harley-Davidson's touring lineup, their seat mounting systems and overall bike designs differ. It's best to check compatibility with specific aftermarket parts or consult with a Harley-Davidson dealer for the best fitting options.

How do you remove the seat of a 2000 Harley Davidson?

To remove the seat of a 2000 Harley Davidson, first locate the seat mounting bolts or fasteners, which are typically found at the rear or under the seat. Use the appropriate tool, such as a socket wrench or screwdriver, to unscrew or unfasten them. Once the bolts are removed, gently lift the seat from the rear and pull it forward to detach it from the frame. Be cautious not to damage any wiring or components underneath the seat during the process.