Mechanical Engineering

a free axle is both tires are independent. one could be in the hole, and the car is still stable. this is what is used today and is the best kind of axle to have.

fixed axles are both wheels are slanted at the same time, so the car will slant with the hole. these can be found on older trucks.

this is a difficult question, it depend the style of your absorption, direct fire or hot water or steam, if you have these detail, you can email me frozenwonderland@hotmail.com

(t)rolled

RULES FROM European Mechanical Handling Confederation.

check

Gasoline, internal combustion,

No one has invented a real time machine yet, so this question cannot be answered.

You don't glue BX cable to steel. If it has to go on a beam, you usually hold it on with plastic 'tie wraps'.

---------------------------------------------------------------------

Wire ties are not recommended for mounting armored bx cables to steel beams. Wire ties are normally used for bundling wires together to keep them neat, though some glue on cabinet tabs are made to mount wires inside control cabinets. These are not meant for external wire mounting.

Cast aluminum clamps are made that hold the bx cable to the beam. a hole must be drilled in the beam to mount the clamps with screws, OR specially made mounting clamps (similar to c-clamps can be mounted to the edge of the beam, then the clamps mounted to those. It is recommended there be no less than one clamp every 6 feet (~2 meters).

I'm not sure what it is called but some cars have a computerized system that will parallel park your car without you touching the steering wheel. It may only be in the developmental phase and not actually installed on any cars, yet.

I'm not sure if your referring to 400C or 400F.

But, according to Shigley's Mechanical Engineering Design, 8th edition by Budynas and Nisbett.

The tensile strength of 1050 steel quenched and tempered at 400F (205C) is 1120 MPa (163 kpsi).

The tensile strength of 1050 steel quenched and tempered at 425C (800F) is 1090 MPa (158 kpsi).

1crore

Something that doesn't oxidize or corrode very easy. Depending on how strong you need it to be, probably T6-6016 Aluminum. Look up the material properties on Matweb and check if the properties are what you need, because it depends on how much stresses will occur in the specific environment.

If you are an engineer, I wouldn't be using this site to figure that out, that's why you went to school.

The standards tell the different wall thicknesses schedule 40 is standard then schedule 80 extra heavy and schedule 120 for very high pressure applications.Copper goes by Type K,L ,M M being the lightest

They go to a air bar and put more air in the tyres.

I dont know

hello i no nothing about this but i think the work because its made out of baterys and well its digital

Unfortunately, the answer to that question is difficult to come by without knowing the location and use of the rotary couplings. The answer could be anywhere from $200-$2000. Please specify use for rotary couplings.

Cork blocks are used for various applications based on the size. The master cork block is often scived down into sheets. Cork blocks can be used for yoga poses to give the user stability in certain poses. Cork blocks are used in carving of duck decoys by duck hunters.

If you are refering to the inducer motor( the one with the little wheel that you see when you take your units doors off) Yes it should keep running when your blower motor is running and before ignition to create your draft and during to rid the gases out your flue Hope I kept it simple

Better from your dictionary, but generally a change between two states, or an agent to accomplish such a change.

He is dead and doesn't own any property, let alone patents.

The word irrigation does not have an antonym. The opposite would simply be the absence of irrigation. Some synonyms are flooding, soaking, sprinkling, watering, and inundation.

- 10fps or 3 m/s only for ADNOC New HQ project -ABU DHABI , But usually it's between 2.5 -3 fps for all projects.

thanks

tssc

High carbon high chromium steel

This varies greatly. It depends on the horse power, seating capacity, aerodynanamics, fixed vs. retractable geer, airframe

21`foot