0
Model Making
Questions about making models, such as cars, rockets, airplanes, or other models.
287 Questions
What is the advantage of creating a model of a dinosaur?
Real dinosaurs cannot be studied because they died out long ago.
How can I make a model of an ox wagon?
Excerpted from WikiHow (Full article at related link): "Make sure you have the following materials (listed further down). # Cut the milk carton in half as shown by the dotted, red lines below. Keep the half with the top point, and paint it brown. Set it aside to dry. # Paint the 4 bottle or milk caps black or brown to make the wheels for the wagon. You can also cut small circles from black or brown construction paper and glue them to the outside of the caps. # Cut a piece of white construction paper about 8 inches x 5 inches. Glue or tape it over the hole you cut in the milk carton to make the cover for your wagon. # Here is the tricky part... Glue the wheels into place! If you are using the bottle or milk caps they will be heavy and you will have to work to find a good position to lay your wagon until the wheels dry. You will want most of each wheel attached to the wagon body with very little hanging over the bottom edge. Enjoy your pioneer wagon. "
it is biaxially oriented pet film.With high dielectric and mechanical property ,it is suitable for electrical insulation, such as slot insulation, ,interurn and liner insualtion ,wrapping insulation for coils and cables, as well as producing insulation laminate meterial.
How do you make working model of rational and irrational nos?
Irrational numbers can not be expressed as fractions whereas rational numbers can be expressed as fractions.
How do you make a guitar out of cardboard boxes?
There are directions for a fun kid's project for how to make a cardboard box guitar in the "Related links" section below. Basically, you just use a few common materials around the house and let the child help with making and decorating it.
A conceptual model is a representation that gives a mental image of the final product.
What are some techniques of holding together small parts while glue dries in Airfix modelling?
You can use a 'third hand' - this is a kind of small clamp on vice with clips to hold things. I also use rubber bands around things like fuselages, or spring clothes pegs over wings. Masking tape is very handy too.
Is it better to paint models before or after you build them?
Some parts you should paint as you build it but otherwise you should build it then paint it
What matirials are best for modeling?
Depends what you are modelling. Generally , plexiglass, polystyrene and wood is used.
How to make a working models for computer exhibitions?
In order to find out how working models for computer exhibitions works you will have to do a few steps. You will first have to go online and download the books of information.
You just got a a PaK40 L46 Tamiya model should you assemble then paint or paint then assemble?
Well you should really paint certain parts as you go along but otherwise you should assemble then paint
When making a model if you reduce or enlarge all sizes of the parts an equal you have a what model?
A scale model
The ionic bond would be harder as it is harder to show the ionic charges.
metallic grey will have a shinny appearance to it, as it has tiny glitter like substance included in the paint to give it that sparkle when light hits it from different directions. Hope that helps to give you an ideal..
How hot do you bake clay in an oven?
If the clay is a polymer like Sculpy, it can be baked at 250 in a regular oven. If it is traditional earth clay, it needs a kiln.
The simplest design would probably be of the 'nissen hut' or 'quonset hut' design. These look like a tube that is split down the middle and placed on the ground, that is, they have a semi- circular cross section. They were made of corrugated iron sheets so corrugated cardboard could be a good cheap material to use.
ANS 2 -WW2 hangars were quite simple shape and came in many sizes. Thin cardboard would be good to make it of. Usually in 1/72 they would be about 18" x 20" and 4" high. The roofs of most hangars were curved. Placing a 1/72 plane in front would give good idea of scale.
