First of all make sure that all 4 tires are the exact same size. I had the same on the front and 2 on the back the same but different than the front. I was told by a mechanic that that would be fine.......WRONG!! I ended up having to change the driver side hub. There is a connector with the hub that is a sensor that takes care of the abs and awd. That is likely why you are getting the signal.
I have the same problem and I have all the same size tires. When we hooked it up to the little mechine thing it gave us a code of "U1301" That is why I am here to find out what "U1301" means. Does any one know?How do you change rear directional bulbs on a 2004 Pontiac Aztec?
OPEN THE REAR HATCH DOOR REMOVE THE 2 BLACK SCREWSHOLDING THE BLACK PLASTIC HOUSING OF THE LAMP ASSEMBLY REMOVE THE HOUSING SWING OUT THE LAMP ASSEMBLY TO EXPOSE THE BACK OF IT TWIST THE BURNED OUT BULB HOLDER REPLACE BULB REINSTALL BUD
Why are your instrument panel lights and stereo lights not working in a 2004 Pontiac aztek?
a bad fuse of a faulty switch.
How do you replace the speed sensor on a 2002 Pontiac Grand Am?
most likely you will have to replace the hub bearing assembly autozone for about $80
White smoke from exhaust pipe?
If it's actually white then it's water. Probably a blown head gasket. If it's got a slight blueish tint to it then it would be oil. If it's oil it will have a strong burned oil smell to it.
2002 Pontiac aztek abs light is on?
Most of the time it's either the sensor (wheel speed) is damaged or dirty, or the wiring harness for the sensor is damaged.
Have it scanned at a qualified repair facility (not Autozone, their scanner can be "shifty") and they should be able to tell you whether it's the sensor or the ABS unit.
Why would by service engine light come on sometimes but not all the time?
Have a dealer or mechanic check for "trouble codes". It's probably the oxygen sensor(s).
How do you rock the engine forward on a Pontiac Aztek?
putin a alternater in how you rock the motor forward .
2001 Pontiac aztek sensor that controls the anti-lock brakes and the awd disable?
Please clarify your question.
I had to reset my computer sensor so that the light would go off after I had mine changed.
Had your aztek towed and now the AWD disabled light is on How do you turn it off?
The place to where it was towed should have fixed that. Look in your owners manual. It may have an index that explains how to turn on your all wheel drive. It is disabled when vehicles are towed. It could be a switch on your dashboard. I do not have an aztek but it is a switch on my dash. Front wheel drive gets better milage in summer. All wheel drive gets better traction in winter.
How many pounds of pressure are required to recharge the AC with R134 on a 2001 Pontiac Aztek?
Total recharge is 1.68 Lbs
Why won't My 2003 Pontiac aztek won't shift out of park?
Check to see if the stop lights are working- shift interlock and stop lights are a common circuit. If not working check the fuse and operation of the stoplight switch. Try turning key to 1st position (unlock) without starting vehicle, shift to neutral to start vehicle and then shift to "Drive".
Where is the thermostat located on the 2004 Aztek?
The majority of the time the thermostat is located where the upper radiator hose connects to the engine. Look for a housing at that location, which is usually held on with 2 bolts.
The majority of the time the thermostat is located where the upper radiator hose connects to the engine. Look for a housing at that location, which is usually held on with 2 bolts.
How do you replace a serpentine belt in a 2003 Pontiac aztek?
First you need really small hands to get in between the fender well and the idler pulley. You need a 3/8 inch break over to get in and pull the idler over to relieve the belt tension. Then you can slip the belt off and put the new one on in reverse order.
Where is the thermostat located on a 2002 Pontiac Aztek?
The part that makes it so expensive is the intake manifold has to be removed to replace the thermostat and its a labor intensive job. but the intake gaskets do go bad often so it will prevent a future repair
AnswerI don't know if this will help or not but I have have a 2001 Aztec and its a pain in the butt mine is located drivers side along the side of the engine I had to bring mine in the shop to get replaced and it wasnt cheap sure the part was that's only $10.00 or so its the labor that's gonna kill you same with the air filter that took me 1hr. to remove and replace itHow do you remove the ignition switch on a 1989 Chevy Corvette?
Remove the retaining ring from the top of your 1989 Chevy Corvette ignition switch. Slide the ignition switch out and remove the wiring harness.
Where are negative and positive posts on a Pontiac aztek battery?
Positive is usually indicated by the color red or by a "+" symbol. Negative is indicated by black or by a "-" symbol.
Where is a cabin filter located on a 2003 Pontiac Aztec?
In your glove box there is a small access door-at least that is where it is on my 2002
How do you remove ignition switch aztek?
I have (2) 2001 Azteks, and have had to do this on both of them. It doesn't have an "SIR Fuse," so I disconnected the battery. I would also recommend buying a genuine AC Delco switch (dealer) and not a remanufactured or "cheap" new one. Made that mistake the first time (cheap new one) and had to replace it shortly after. The "genuine" AC Delco has lasted me 75,000 miles (mine has 203,000 miles on it, the wifes has 154,000 miles). You do get what you pay for in some instances!
Turn wheels to straight ahead position, and then make sure ignition is off.
Remove negative battery cable.
Disable SIR (air bag system) by unhooking the wiring harness to the drivers side (located beneath the dash, you'll have to remove a cover, it should be a yellow connector). The passenger side connector is underneath the seat, same style, same color.
IF you have side impact bags, locate those connectors and unhook them also.
On the underside of the steering wheel, there is a trim cover. You will need a #2 Phillips screwdriver and a torx bit (can't remember which size) to remove the trimcover.
Once you've removed the screws, remove the cover. The Ignition Switch is directly below the ignition lock cylinder. You will need two flatblade screwdrivers.
Depress (at the same time) both retaining screws, the switch will be able to be slid down and out.
Unhook harness, install switch, and replace trim covers.
To arm the SIR system, reconnect harnesses.
Reconnect negative battery cable.
How do you change the battery in a 2002 Pontiac Aztek?
We bought our 2001 Aztek used. It did not come with an Owners manual. So we bought one on CD. Just in the event we needed to do something like replacing the battery. Unfortunately it does not tell you how to replace the battery. I am quite capable of taking things apart until it will come out. It would just be nice to know the simplest method. After searching I foud this; I had to do this (subject line) at work today and thought I'd post it for the heck of it (and for the groups.google archive) It was a 2001 model but that shouldn't matter. It's about a 20 minute job with the RIGHT tools. 1. Use 10mm ratcheting box wrench to detach fuse block from fender, then "move" it a little out of the way. 2. Use 3/8" drive air-ratchet with 12" extension and both a 13mm swivel socket and 10mm swivel socket to remove the strut tower brace bolts. 3. Use the above, with the 13mm, to remove battery hold down bolt and wedge. 4. Use 5/16" ratcheting box wrench to remove battery cable terminal bolts from battery. 5. Carefully using both hands, tilt inner (closer to engine) edge of battery up at about a 30 to 45 degree angle, then remove battery. Reverse to install. (never TIGHTen things with an air-ratchet, though ;-) )
How do you take out the fuel pump on a 2001 Pontiac aztek?
It is mounted on the top of the fuel tank. Just remove it.
How do you change the head gasket on a 2001 Pontiac Aztec?
Step 1: But the appropriate Service Manual.
Step 2: Read it.