0
Buick Regal
This category covers questions about the Buick Regal, a full-sized luxury sedan manufactured by General Motors and sold through its Buick Division in the People's Republic of China. The Buick Century was renamed as the Buick Regal when it was sold in Asia as the Toyota Motor Corporation had already claimed rights to the name "Century."
1,721 Questions
How do you replace the serpentine belt tension pulley on a Buick Regal?
with a 9/16 socket and ratchet
Remove oil pan from 1998 Buick Regal 3800 Motor?
To remove the oil pan all you have to do is drain the oil and pull the oil pan bolts. Then you have to move it so you can get at the oil pickup tube bolts. You get those out then you can just let that fall down on top of the gasket which will then come off with oil pan.
I had a hard time with this. I still had to remove the two bottom bolts, On the front motor mount and lift the motor 4-6 in.
How do you remove rear speakers on 1999 buick regal?
The rear speakers on a 1999 Buick Regal are removed by accessing the speakers from the trunk. The mounting bolts and then removed, the wires disconnected, and the speakers lowered from their mounts.
What is the cooling system refill procedure for a 1988 Buick Regal?
A 50/50 mixture of antifreeze and distilled water.
Where is the reset button located on a 1991 Buick Regal?
People will be able to help you out a lot better if they know what reset button you are looking for. Make sure you say model, year, and what engine is in the car. Will be looking for more specific question so we can help you out.
Where is the 2001 Buick Regal fuel filter location?
Look under the vehicle follow the fuel line from the tank
Where is the battery located on a 1996 buick regal?
Front drivers side underneath the windshield washer fluid reservoir. You'll have to remove the engine brace, reservoir, and the two relays behind it to get access to it. The first time it took me just over an hour to replace, so make sure you get a premium battery.
The belt for that year of vehicle with a 3.8 engine WITHOUT a/c should fit easily. but if you cannot find the belt without ac then you can get the duralast 725k6 model at autozone work very well I'm impress. this can be us on buick regal 3.8L engine
What is the spark plug gap for a 2000 buick regal?
The spark plug gap for a 2000 Buick Regal should be set at .060 inches. New spark plugs may be purchased at an auto parts store and will be preset.
How do you compress the rear caliper pistons on a 95 Buick Regal?
put a piece of wood ( to protect the edge of piston ) over piston rim, then use a C-clamp, slowly tighten clamp until you have enough clearance for the new pads.
remove the cover from brake reservoir first, as back pressure needs to be released.
********** This is not correct.
Most modern cars with rear disc brakes have calipers that twist as they extend, and must be twisted in. There is a tool for this, which you can buy at Harbor Freight and most auto parts stores, and can be borrowed at some auto parts stores, that fits in the caliper bracket and has a handle to turn the caliper clockwise in. If you try to force it straight back, you will destroy the caliper.
WheRE ARE THE SPEAKER WIRES IN A Buick REGAL?
That really depends on what year the regal is. For the early 90's there are two speakers located in the trunk directly below the rear window which are visible from inside the trunk, and there are two speakers located in the top of the dashboard which are accessible by removing the speaker grills. For later model Buick regals the rear speakers are the same, but the front speakers are located in the front door panels (you have to remove the door panels to access the wires).
I'm not sure what the firing order for that vehicle is but try Autozone.com they are posting tech data on their web site now. If you plan on doing plugs and wires just do one at a time, then you should'nt need the firing order.
The plastic panel the houses the light assembly needs to be removed. The plastic panel is clipped in. To remove it carefully pull it out starting from the left side of the panel at the top and moving down to the right ending on the right. Be careful that the clips don't fall of the plastic panel. You may need to use some strength but it will come off. The light assembly is attached to the rear door. To remove it press down on the top of the red cover. Turn the light socket counter clockwise until you can pull it out. To remove the light bulb pull it out of the socket. It is a 921 18w bulb a very common high mount stop light bulb. The bulb can be purchased at most car parts stores such as Canadian Tire, Napa auto parts or Lordco auto parts. Push the new bulb into the socket. To replace the socket match it up with the lens and turn clockwise to lock in place. Make sure the wires are on the left and the open end of the lens is toward you. Install the assembly back on the door starting with the bottom and snap it back in place. Replace the plastic panel and reclip it by punching it with the side of your fist starting at the left. Punch the entire panel to ensure all clips are reclipped.
How to open hood if cable broke on 1992 Buick regal?
how do you open the hood on a 1992 buick regal if the cable is broke
Where is the fuel pump located on a 1990 Buick Regal?
In the gas tank. it's best done on a lift. You have to drop the tank and get to the top if it. It's in there. Not an easy job.
How can you put the transmission in neutral without the key?
On my 93 Metro on the console (at the end towards the back seat ) there is a square button, it pulls out, and when you pull it out you can change gears, of course you still have to hit the brake pedal.
What engines years and models will interchange with supercharged 1997 Buick Regal?
The 1997-2005 Pontiac Grand Prix GTP and 2003-2005 Chevy Impala/Monte Carlo SS also used the supercharged 3.8 V6 and were built on the same W platform as the Regal GS
