0
Bumpers
A bumper is located in the rear-most or front-most part of an automobile. Legally required on all vehicles, it consists of bars designed to absorb impact and prevent serious damage to the vehicle's safety systems.
1,065 Questions
hmmm. interesting a 4 door m3, well to start a m3 is a totally different car, it only looks like a 235 or 330, the front bumper is a new design and are not interchangeable, lighting one can get to look similar, but if you want a car to look like a m3 but don't got the money for a m3 is to buy the 330ci with the m sports package, this has very close m3 style with nice rims, and interier peaces are close to m3 also, they are also very good cars to drive. good luck.
What is the cost of repairing a bumper and fender on a 2003 Kia Rio?
I just had my rear bumper replaced...it cost over $1,800. I had the side panel and trunk lid replaced too, so maybe the bumper alone isn't that much.
How do you install a front bumper on a Acura Integra?
On my 1990 integra, there are like 5-8 bolts underneath and 1 or 2 on the inside of each wheelwell
What is a bumper-to-bumper warranty?
It means that everything on the car is covered by the warranty.
Tires, belts, wiper blades, brake linings etc. are considered to be wear items, and these are owner's responsibilities to maintain them.
Never ever believe the guy selling extended warranty when he says bumper to bumper. There is no such thing!
Read more: Does_bumper_to_bumper_warranty_include_tires
How do you remove the front bumper from a 2002 Hyundai Santa Fe?
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
Is it possible to replace vauxhall tigra headlights without removing the front bumper?
Suspect this will be similar to the corsa ones done recently.The bumper doesn't have to come right off,but the fasteners under the front wheelarches need to be removed.This allows the bumper to be "eased"out so the headlamps will clear it. .
You want to change front bumper to a heavier style do you need to worry about air bag sensors?
The air bag sensors are on the frame so they will not be a problem. Mark
Does 2005 rear bumper civic sedan fit 2001?
A 2005 Rear bumper will fit on a 2001. Although the years are off by four, the type of Civic is still from the same series.
How do you find a 1994 Ford Taurus front and rear bumper?
one way is to call auto salvage yards, and ask them if the have what you need. you can usually get what you are looking for at a bargain price At AutoZone: special order Keystone FO1001147A front bumper Keystone FO1100220A rear bumper
How do you remove a rear factory bumper from a 2000 cavalier?
Hey..how are u doing...i was looking for an answer for this question but couldn't find one anywhere....so i figured it out
hope I'm not too late..
there are 4 black push clips on the underside of the bumper(the center of the clips comes out and looses tention becareful not to break this cause u have to reuse it.
second open ur trunk. on the left and right side pull back the carpet(near the brake light assb.) there are 2 10mm bolts on either side near the inner quarter panel.
there are 2 screws on both sides of the rear wheen well that hold the bumper in place on the side.
slowly pull the bumper for the side...there is another push clip that attaches the bumper to a black plastic rail remove on either side (located just before the bend in the bumper.
and that's it...
Please let me know if this was helpful
DJzeroflau@hotmail.com
How do you remove the headlight so that you can replace bumper filler on a 1990 caprice?
there is 3 10 or llmm nuts on the back of the headlight assembly, then once that is removed there will be 4 torx screws that hold the headlight trim in place, once these are removed then bumper fillers can be installed.
What is the best way to clean chrome fixtures?
I use rubbing alcohol. It makes everything shine. It's also great on windows and mirrors.
Wash with sudsy water. Rinse and wipe dry to bring up luster.Do not use abrasive household cleaners on these surfaces because they may scratch. If there is sticky or gummy soil to remove, try rubbing with baking soda on a damp cloth or sponge, or wipe with vinegar, rinse, and buff dry. For difficult spots, you may need a metal polish made especially for chromium or other soft metals.
Burned-on grease on appliances may be removed by commercial cleaners or by using silver polish. Several applications may be necessary if burned-on grease is allowed to build up.
[Info from the Home Maintenance And Repair Database at the Michigan State University website]
- For quick clean-ups, I use either a facial cleaning pad or toilet paper with rubbing alcohol.
toothpaste works great. I found out when driving truck if you use a crome polosh like turtle wax brad. and then hfter cleaning you apply a small coat of wax you make it last longer.
Dip a cloth in warm water and a few drops of ammonia or meth. spiritus, and then polish with a clean cloth. good luck
White vinegar and rubbing alcohol work great! Also, a wiping dry fixtures with a used dryer fabric softener sheet creates a great shine! Buffing with lemon juice results in a shine as well.
I bought a new factory hitch for my 2001 jeep Cherokee and here is the way to do it.First remove your plastic bumper corner guards. They have 2 screws one is a size 10mm on the bottom inner corner the other is where the bumper meet the wheel well, these I found to my surprise are 1/4 inch screws, not metric like the rest of the jeep. Next slide these corner guards backwards toward the rear of the vehicle and the lips the bumper guards have inside will slip off and let the part free. Now your bumper is exposed on both ends and you can see 2 nuts on the inside (one on each end of the bumper) holding the bumper on. Now put on your patience cap. The nuts are a long ways in but you can reach in with a wrench. You will need a friend with thin arms. Decifer the size and loosen the nuts. It is hard as hell since they have thread compound and there is only so much you can move your wrench in such a tight spot. Afterwards your wrists are probably killing you, but you manage to loosen the last 2 screws which are beneath the bumper. Voila! BUMPER IS GONE. Now you can finally insert the reenforcement bar or bars with welded nuts if needed (if you don't have them they can be odered) and proceed with the instalation. Don't forget to change your rear axle/differrential oil to a 75W-140 as specified on the owner's manual so that your axle doesn't suffer damage from the higher temps towing causes!
How do you remove a fender and bumper from a 1998 Dodge Dakota pickup?
You have to have a little mechanic ability to unbolt them and reinstall them.
^^^^that is a given, here is a step by step instruction on how to remove the bumper on a Dodge Dakota 98-99 (i'm sure it's the same for a few other years mainly generation 2 Dakota's), and a list of tools needed.
Tools needed:
18 mm Socket and a ratchet
WD-40/PB Blaster
#2 Phillips bit screwdriver / flat head (in order to remove bumper cover)
how to remove the bumper:
1.) pop your hood and open it all the way
2.) look down in front of your coolant overflow tank and just to the left of the radiator
3.) remove the four 18mm bolts from bumper
4.) pull bumper out
(if you need to remove the brakets that the bumper is bolted to then you need a T50 star bit and a 3/4 inch socket with a 6" extention)
What tools do you need to replace a Toyota Echo rear bumper?
A socket set and a set of end wrenches is all you need.
