If an amplifier is AC 220Watt and 12 DC so up to how many watts or ohms speakers you can use on it?
Your question doesn't fully make sense. Let me see if I can answer part of it. If your amp puts out 220 watts, the speakers should be rated for at least 220w, or they may be destroyed if you turn the amp all the way up. Watts are a measurement of power, in the case of speakers they are rated for how much power (watts) they can handle.
Ohms is a different thing altogether. Ohms are a measurement of resistance to electrical flow. Amps are usually rated to work with certain impedance level speakers (4 ohm, 8ohm, 16ohm, etc.) the lower the ohms, the harder the amp works. I know it seems backwards but it isn't. each amp is different so you would have to read the amp's spec sheet to see what they reccomend. I have no idea what you are asking for with the "12 DC" thing.
How do you hook two subs up to one amp?
It depends on the impedance of the subs, whether they are single- or double-voicecoil (SVC or DVC), and the rated output impedance of the amp. If you've got two 8-ohm SVC subs and your amp is rated for a 4-ohm load, then you can put them in parallel. If you've got two 4-ohm SVC subs and your amp is only rated for a 4-ohm load, then you'll have to put them in series, even though you won't be able to extract maximum power from the amp. With DVC subs, you've got more flexibility to get an efficient match. In any case, you have to pay attention to polarity.
Car stereo wiring color codes for 1991 Toyota Camry?
1991 Toyota Camry Car Stereo Radio Wiring Diagram
Radio Constant 12V+ Wire: Blue/Yellow
Radio Switched 12V+ Wire: Gray
Radio Ground Wire: Brown
Radio Illumination Wire: Green
Radio Dimmer Wire: N/A
Radio Power Antenna Trigger Wire: Black/Red
Radio Amplifier Turn On Trigger Wire: N/A
Front Speakers Size: 3 1/2″
Front Speakers Location: Dash
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Purple
Right Front Speaker Wire (+): Light Green
Right Front Speaker Wire (-): Blue
Rear Speakers Size: 5 1/4″
Rear Speakers Location: Rear Deck
Left Rear Speaker Wire (+): Black
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Red
Right Rear Speaker Wire (-): White
How can one tell if the sub and amp are compatible?
Finding a compatible sub and amp can be a hard process. It is important to look at several variables. An easy way to tell if a sub and amp are compatible is by visiting the Sonic Electronix website. This site provides a free amplifier and subwoofer matching tool.
Where is the second fuse box on a 1997 Chevy Blazer?
they did not start putting second fuse boxes "under the hood" until 98 and earlier. you will not find one on a 97
Replaced Stock stereo in 98 Civic EX now alarmKeyless entry does not work?
Contact crutchfield radio / electronics they will provide you with a free wiring harness when you purchase the radio thru them which will allow you to connect your radio without effecting the cars other electrical systems.
the 1996 to 1998 Honda civic has the keyless entry module built into the factory radio, you will have to wire the factory radio in-line with your aftermarket radio, most people then hide the factory radio under the center console. your other options would be to go without keyless entry or install an aftermarket unit.
Why wont aftermarket radio turn on with correct premium sound wiring harness in my 1997 4runner?
Check your fuses
I recently installed an aftermarket stereo and had the problem of the unit turning on and off repeatedly. The factory ground wire was to thin/weak. I grounded my new unit directly to some metal that was inside the dash where the stereo was to be mounted. It worked well and stayed on after that.
Why does ohm's matter with speakers?
the vibration produced in the coil of a speaker is due to current passing through it hence it obey ohms law
Wiring color code for sony CDX-GT520?
The wiring color code for the Sony CDX-GT520 car stereo typically includes the following: the red wire is for the ignition (switched power), the yellow wire is for battery (constant power), the black wire is for ground, the blue wire is for power antenna or amplifier remote turn-on, and the speaker wires are usually color-coded as gray and gray/black for the front right, white and white/black for the front left, and so on for rear speakers. Always refer to the specific user manual for precise connections and any variations in wiring color codes.
Is there a way to bypass the remote wire when installing amp to factory stereo?
Yes you can connect it right to the hot wire along with the Main B+ but why? Most car stereo have a wire for electric antennas (labeled as such) and they are very handy to turn on the amp especially if you want to connect the amp main B+ right to the battery for high current which is desirable, you can also probe the fuse box with a voltmeter and find a fuse that only has power when the key is on or in ACC.
The reason being y i dont want to use the remote activation is because im going ipod amp speakers and my ipod dosent have a remote activation. If the dont know its there then they wont look to steal it
What does the power antenna hook up to?
A power antenna typically connects to the vehicle's radio or audio system, allowing it to extend and retract automatically when the radio is turned on or off. It may also have a power source connection, usually to the vehicle's fuse box or battery, to receive the necessary electrical power. Additionally, it may connect to a ground point to ensure proper functioning.
Aftermarket stereo installation 2001 Pontiac sunfire?
i have a jvc aftermarket stereo i want to replace my factory stereo, i have the correct wiring harness to fit my car, i checked online and then bought and sure enough it fits, ive re-connected all the wires to make sure they were all connected good and taped up good, did this several time and it still wont work right.. at first it would eject a cd that was in there, after i kept that out, it kept acting like it was ejecting or taking in a cd but there was no cd. for a split two seconds, the blue led light came on in the jvc, but then went straight back off, since then, i havent been able to get the light to come on again.. please help on wht i need to do!! i really want my cd/aux in my car..
What does 20 watts RMS50 peak x 4 channels mean in a car stereo?
RMS is basically the amount of watts that the stereo can continuously dish out and the peak is like the most watts it can give out but only in bursts. And the the amount of channels is how many speakers it can give power too. So basically you can continuously give out 20 watts to each speaker if you have four hooked up to the thing.
What size speakers are in a 1997-2000 Taurus - Sable?
How do you set a pioneer super tuner D clock?
Hold the SRC/power button until the radio is off. Then hold the big button until it prompts you. When it says "Clock Set" you hit the select button again and the rest is easy.
How do you take out the factory stereo on a 1991 Holden Apollo?
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
What size speakers are in a 1998 Ford Contour?
the front door and back door speakers are 6" x 8 " speakers
Where can you find a wiring diagram for a 898342-8710 cushman?
I have a 1988 Cushman Eagle 4-wheel industrial cart, Model # 898342-8840.
I found a parts manual at Jaconsenmanuals.com
You will need to register at the site and then use the search feature in the up right hand corner - input the model number.
The parts manual has all of the wiring diagrams as well as the parts. The manual costs $15 plus shipping and it arrived in about 5 days.
Thsi seems to be the only manual that they have available for this model.
Good Luck