Sample application letter of computer science?
Name
Street Address
City, State, Zip
Date: MM/DD/YYYY
Dear Mr. _________,
My training in computer sciences would enable me to solve Taylor's engineering problems, and I am very interested in holding a position in your engineering department.
In June of this year, I expect to receive a Bachelor of Science in Engineering from North Carolina State University. Since September of 2000, I have been participating in the University's Professional Training Program at Computer Systems International in Raleigh. In this program, I was assigned to several staff sections as an apprentice. Most recently, I have been a programmer trainee in the company's Engineering Department, and I have gained a great deal of experience in computer applications. Details of my academic courses are included in the enclosed resume.
If there are any open positions at Taylor, Inc., then please let me know whom I should contact for further information. I look forward to hearing from you soon.
Sincerely,
(signature)Your name
yeah!! smash the keys out with a hammer and put a pinch of salt and a dash of cinnamon and your good to go!!! yum yum yum yum i love key boards!!!
A plebiscite on the amendment to the Constitution pursuant to resolution of Congress dated September 18, 1946, granting United States Citizens right to the disposition and utilization of Philippine natural resources or the Parity Rights. This occurred on March 11, 1947.
What piecewise linear transformation functions are used in image processing?
The form of the piecewise functions can be arbitrarily complex, but higher degrees of specification require considerably more user input.
On a Cisco router which interface would be used to make the initial configuration?
Ask in the computing category.
What is J2EE appilication server?
The J2EE application server is the server in which the j2ee application would run. Without the server a j2ee application cannot run. Some famous j2ee application servers are:
a. Websphere
b. Weblogic
c. Tomcat
d. etc
Show that sum of two convex functions is convex.?
Consider 2 convex functions g(x) and f(x).
Using property of second derivative test we have:
g(x)'' > 0 and f(x)'' > 0.
We are interested in showing that y(x) = g(x) + f(x) is also convex.
y(x)'' = c*g(x)'' + k*f(x)'', where c and k are positive numbers (where is no convex function those coeficients after diferentiation will give you negative numbers).
Because c, g(x)'', k, f(x)'' are > 0 , we get y(x)'' also >0, hence y(x) is a convex function.
Does a computer have to have an operating system?
Technically, no. However, as a in user, you could do anything without messing something up without an O.S. That is why any computer that you buy comes with a xp or vista (windows) CD or with the operating system already installed. I guess the answer is technically yes, but not really!
I'm uncertain as to whether you're asking because you simply don't know or if you're trying to open a 'what might have been' debate. ISDN could integrate voice and data but the principal functionality was circuit-switched technology and so would require the use of layer 2 switching to disseminate call requests around a network; PBXs certainly provided layer 2 switching. There is a data capability but this really is a small-scale enterprise, it is used chiefly for signalling and low-rate user data eg keystrokes or things like (I'm guessing) chat windows. Data was inherent in the BRI and was only switched out of the same channel at the PBX where voice, data and signalling were separated but the point is that the data needed the PBX in order to implement that separation. ISDN was not well-equipped for large file transfers so it is unrealistic to consider its data capability as a peer of its telephony capability. Computer communications (it has to be stipulated, some years ago now) utilised the higher-rate B-channel and Frame Relay was a purpose-built protocol designed for B-channel computer communications but the ISDN solution never emerged as a dominant market player, I recall some mystifyingly high equipment and line pricing strategies had alot to do with it.
Why not design a single really powerful processor?
It depends on what kind of processor you are talking about. If you are talking about a CPU, the main processor in a computer, the reason for multiple cores and not a single very processor is a fairly simple answer. Imagine you have a toll booth (the CPU), with a number of lanes (cores in the CPU). In real life the technology only exists to build a toll booth of a certain size. So what happens? You build more lanes and add more toll booths.
That is basically the reason for building multiple cores.
What is the Exact function of loop back addressWhich is loop back add127.0.0.0 or 127.1.1.1?
The loopback address is 127.0.0.1. It is also called 'localhost'. It's purpose is simple: It's the most rudimentary test for functionality of your NIC (Network Interface Card). For example, if you ping 127.0.0.1 OR ping localhost you'll get a response IF your NIC is enabled, connected to something (physical network or wireless) and working. Problems with localhost pinging usually means a problem with the NIC itself. Google Web Accelerator, Hello, and some other tools take advantage of the loopback address for functionality. They open a port on loopback to internally 'host' web pages. Google Web Accelerator for example, creates a local cache of your web pages, and sets your proxy to the loopback address on a specific port, so that you get the local cache first, giving the illusion of instantaneous loading of the page.
How do you desensitize a jitter in an application?
Buffering, on the receiving end, desensitizes transmission jitter for the receiver. Once data is received, the more random (not uniform) the transmission, the more buffer space is required. Each process on the 7-step OSI (Open Systems Interconnect) model layer takes processing power & time for each nugget of data passing up from the physical layer to the application layer. If there is not enough buffer for each part of the process, before it is dealt with and passed up to the next layer, bits may get dropped, and not all data makes it to the application layer. Note that encryption, deployed today, plays a very negative role here (but does play a very important role). If all data has to basically bypass the mid transportation layer and has to be taken care in software (e.g. to un-encrypt), the advantages of hardware performance are avoided. Also, any dropped packets/information has to be replaced if needed. The OSI transportation layer does this fairly efficiently with TCP (Transmission Control Protocol), relative to how well the application layer will. Some types of data do not require that all bits get to the destination but enough needs to get there for the use of the information to be understood. How much information needs to get to the destination is determined by the application and user acceptance. Most data is considered corrupt if one bit is missing but there is enough redundancy in audio & video that some bits can go missing. When bits are missing from an audio or video stream, the result may be un-noticed, un-comfortable, or un-recognizable depending on the amount not received and presented to the user. Audio and/or video streaming can be buffered to counter act the effects of transmission jitter. Applications that need real-time response (2-way communication) will have some delay, to the end user, due to buffering requirements. This is just the simple version of the jitter issue. There is an incredible amount of impressive research that has been done and is still being done to further enhance the effects of jitter.
RFCs are documents that detail protocols, standards, and information that define the internet.
How many types of computer networking can be done?
how many type of computer networking
LAN - Local Area Network
W LAN - Wireless Local Area Network
WAN - Wide Area Network
MAN - Metropolitan Area Network
SAN - Storage Area Network, System Area Network, Server Area Network, or sometimes Small Area Network
CAN - Campus Area Network, Controller Area Network, or sometimes Cluster Area Network
PAN - Personal Area Network
DAN - Desk Area Network
LAN and WAN were the original categories of area networks, while the others have gradually emerged over many years of technology evolution.
Note that these network types are a separate concept from network topologies such as bus, ring and star.
A routing table has columns for at least three types of information, Network ID, the Cost and The ID of the next Router called Next Hop.
What is iir filter's applications?
IIR filters have nonlinear phase characteristic which means the output of such a filter is (most likely) a deformed version of the input without the filtered frequency. On the other hand IIR filters might become unstable. So IIR filters are used, when the user is not particularly interested in the output in time-domain but only in frequency-domain, e.g. in audio applications such as speakers...
Why do bit rate decrease due to distance?
imagine that your connection in an tube of 10M with a 1degree angle
You drop a glass of water in it. That take 10sec.
imagine that your connection in an tube of 100M with 1degree angle,
You drop a glass of water in it. How long the water take to reach the end ?
The data is very comparable to water in drain....
Jean-François Cyr,
Where can you get a reference model of NAND flash?
Free model foundry does have many Flash memory models. (Simulation models). They are available under GPL license. (Atleast those I've downloaded were under GPL, you can check for alternative lic on their site) Though I believe, many of them may be NOR, however some may be for NAND as well. Check them out.
Listing(VHDL):
http://www.freemodelfoundry.com/flash.php
( or http://www.freemodelfoundry.com/model_list.html and go to table Flash memories)
Listing(Verilog/SV):
http://www.freemodelfoundry.com/vlog_flash.php
( or http://www.freemodelfoundry.com/vlog_model_list.html and go to table Flash memories)
--
Abhishek Kohli
+919974772274
What type of transmission is measured by baud rate?
The speed of any type of digital data transmission can be measured in baud. However this unit is usually applied only to serial communication channels carried via a single line (thus can only have one state at each point in time). While this unit is not usually applied to parallel communication channels carried via multiple lines (thus can have a different state on each of these lines at each point in time, making the actual baud rate of the channel the number of lines multiplied by the baud rate of one line).
Baud = state changes per second. Not bits per second!!
An example is the telephone modem. Because the bandwidth of a telephone signal is limited to 3KHz, the maximum possible speed is 2400 baud. However much higher bit per second rates are possible by using very complicated states (e.g. different signal amplitudes, different signal phases) and sometimes data compression algorithms.
For example with 4 different amplitudes and 4 different phases that can be used to represent a state, 16 different states (4 bits) can be transmitted for each baud. This would allow a telephone modem (limited to 2400 baud by the bandwidth limitation of the telephone line) to transmit 9600 bits per second.
For example with 8 different amplitudes and 8 different phases that can be used to represent a state, 256 different states (8 bits, 1 byte) can be transmitted for each baud. This would allow a telephone modem (limited to 2400 baud by the bandwidth limitation of the telephone line) to transmit 19200 bits per second.
What is the same track on each platter?
A cylinder. Each track on each platter can be thought of as being a ring, thus if you isolated the same track upon each platter you'd have a stack of imaginary rings which would therefore form an imaginary cylinder.
Can all computers display HTML5 code?
See, HTML 5 is the latest web language and nearly all the famous web browsers are supporting it. So, if your computer is capable of running that browser version then it can obviously display it.
What is user define datatype and explain it?
Any datatype which the user creates in code, that isn't native to the language. A linked list can be an example of this
Why does a network host need to broadcast an ARP request?
A host on a network needs to broadcast an ARP request to advertise its Mac address. The networking world is very chatty in nature and when a new network host is available it immediately broadcasts its Mac address as with a ARP message.
Also when a particular network host needs to send a data packet to another network host available in the same LAN whose Mac address is unknown, the first network host sends out a ARP message requesting for the destination network hosts MAC address.