its quite easy actually...always install the earliest OS first...in your case, install 98 on whatever drive you wish and after it is complete...install xp on the other. during boot, you will be given the option to boot what ever OS you wish.
I tried your sugestion, loaded 98 first on the first drive, xp on the second drive...it does not work, only boots into 98
XP should be loaded with both of the drives connected. After loading 98, do not make any hardware changes. Just go and load XP onto the second drive. XP will create some files on the 98 drive that will bring up an OS menu at boot time allowing you to choose the OS of your choice. It will only show for about 30 seconds. Maybe you just weren't at the computer when it displayed.
The amount of time that the OS selection menu appears, and the OS that the system defaults to can be customized to boot into Win98 or WinXP if no action is taken by the user. You could configure a computer to allow it to boot into Win98, WinME, Win2000, and WinXP, if you wanted to. You could also have it boot to three different Win2000 installations if you wanted to.
A few tips to follow. Always install the older operating system first (i.e. Win98, then Win2000, and then WinXP.) Don't change drive letters after installing. Changing major hardware components will likely require reinstalling everything all over again. So, keep your motherboard the same. Changing a motherboard prevents the operating systems from booting because they don't have the drivers for the new hardware, and therefore, can't utilize them.
Where was the station the Grand Trunk Railway used on 63 street?
Chicago Lawn station was on the south side of 63rd, built into the east side of the railroad embankment (after the tracks were elevated in 1929), giving it an address of 3601 W. 63rd. Several restaurants have operated in the old station building since passenger service ended.
What do you get in the new wow expansion?
The Mists of Pandaria expansion (release date September 25, 2012) will add:
* The Pandaren Race with their own starting zone, Wandering Isle
* The Monk class, available to all races except Worgen and Goblins
* Updated models for the older races
* Level to 90 in Pandaria
* Pet battles where your companion pets can compete and level up
* New dungeons and raids
* Challenge Mode dungeons to show how good you are with good-looking gear as reward
* Updated classic dungeon: Scholomance
And much, much more
What computer is boon and bare?
A boon - Computers allow us to find things that we do not know , get to know people from other countries and even make friends with them. Computers allow us to find different games that interest us and relax ourselves when stress. We listen to songs and music through YouTube and other websites. You will feel relax and enjoyed when listening to your favorite band/singer's songs. Some even said that computer is the best way to gain knowledge anywhere and at anytime.
A bare - You never know what is on the other side of yours , the ones you called friends? Do you really know them so well? Friends or enemies? You never know. If you decide to play ricks with them , the only way is to trust them , but it's your own choice. In virtual world , anything can happen , hackers , traitor , betrayers , they are all commonly found in the so call ''virtual world''. Have fun? or do you mean , have troubles? You can do anything , I mean anything inside there , but think of the consequences. You have no idea who you are facing , if you think you do , yep , the computer screen you mean. Sometimes the person on the other side is a tough and smart person , unless you're lucky or so. Cyber bulling and other sorts of bullying occurs there and no one can help you if you are engross in it. Computers will pull down your grades if you are addicted to them.
Thank you =)
How much did computers change 40 years ago?
They weigh less they are smaller and there are many types like touchscreens and more
cw: In the old days, computers used iron-core memory. Then Metal-Oxide-Semiconductors (MOS) were used for memory. Now, newer technology. And that's just talking about the memory.
Is it worse to let a chromebook die or keep it plugged in all the time?
Whatever the lap-top - if it's being used at home, connected to the mains - it's better if you remove the battery altogether. This will not only stop the computer trying to charge the battery - but also lengthen the battery's life.
False.
Does svr have cheatcodes to it on ps2?
smackdown vs. raw for ps2 does have cheats one is historacal belts it unlocks cruiserweiht,hardcore, and million dollar champion
HP computers are good. Fujitsu are amazing computers, they will not die.
Or build your own.
How do you get all Pokemon lv100 on pokemoncrater?
by trainig yourself. see your Pokemon type and fight with its weakness.
example=go to ani 1436 with a water Pokemon lv=60
Is a rock island 1903 in the 300000 range safe to shoot?
Any vintage military firearm should be checked by a competent gunsmith that is thoroughly familiar with that type of weapon before firing.
What are the benefits of virtualization?
One benefit is that a virtual desktop is eco friendly and will save your company money on its power bill. You can find six more benefits of virtual desktops here: http://www.zdnetasia.com/seven-benefits-of-virtual-desktop-infrastructure-62051917.htm
Go to Windows Media Player and go into Library and find where you have saved all your music. When you find all your songs press ctrl A and drag all your songs into the little box on the right and now you have your own play list thank you to all who saw this i hope you have learnt how to do it!
Your Sincerely,
Jawad Moghnieh
How do you get videos onto YouTube from your camera or do you do it differently?
You need to create a YouTube account first. If this is already done, click the Upload button in the top right corner, and log in if necessary. Fill out all of the information about the video and click Use Quick Capture on the bottom.
What is the difference between desktop operating system and real time operating system?
Very easy. Desktop operating system is the base from all you use for write in word processors, internet browsing, gaming, etc, requiring time for processing instructions. Microsoft Windows or Debian GNU/Linux is an example.
The function of real time operating system is the fastest response time at the queries. His function would be, for example, push one key and instantly responds, without process necessarily instructions, or execute one command or utility without wait any time: practically instantaneous. His structure is simple for memory/disk/network access. The high performance cluster servers and supercomputers can use real time, but not necessarily. The OS most nearest for this instruction method is RTOS/360.
It's not really clear how much a BIOS costs since they're not marketed to end users but are sold to motherboard manufacturers. A BIOS is essentially a part of a motherboard. A BIOS is likely to be removable on a modern motherboard and technically it could be possible to replace a BIOS if it went bad or if for some reason it was to be upgraded, but for BIOS upgrades usually it is sufficient to flash (reprogram) the existing BIOS.
Where do you type the password to get the Manaphy egg?
U don't use a Password u need the First Pokemon ranger then u have to beat the game and on the Special quest on the Beginning screen then u get the quest Rescue the egg then u do that and u need another DS/ DSI then on Pokemon ranger u click on something that looks like it will transfer the egg then u transfer it to Pokemon Platinum, Pearl, or Diamond (with the other Game on u go to Hearthom and go to the Poke mart there will be someone there who isn't familiar talk to him and he'll give u the egg. that's how u get manaphy.
It depends what power rangers series yo mean. I don't think the latest series was babyish
Should real time operating system be necessarily multiprogrammed?
MULTIPROGRAMING .................. The term multiprograming denotes an operating system that,in addtion to supporting multitasking. In multiprograming more than one jobs are active in memory.Within a very small period more than one jobs are executed simultaneously. MULTITASKING ............... In general multiprogramming implies multitasking,but multitasking does not imply multiprogramming. A multitasking operating system is distinguished by its ability to support concurrent execution of two or more active processes. as discussed actually both multitasking and multiprogramming are same no other answer mentioned are justifiable.....
How do you install a network operating system?
When you install a network operating system (NOS), you have to make some decisions about how you want the operating system and its servers to be configured. Most of these decisions aren't cast in stone, so don't worry if you're not 100 percent sure how you want everything configured. You can always go back and reconfigure things. This is an overview of a typical installation of Windows Server 2003. Although the details vary, the overall installation process for other network operating systems is similar.
The method you use to begin the installation depends on whether the computer already has a working operating system:
* If the computer already has a working operating system, simply insert the Windows 2003 Setup disk in the computer's CD-ROM drive. After a moment, a dialog box appears, asking whether you want to install Windows Server 2003. Click Yes to proceed.
* If you're installing Windows Server 2003 from a network drive, open the My Network Places window, navigate to the shared folder that contains the distribution files, and run Winnt32.exe.
* If the computer doesn't already have a working operating system but can boot from a CD-ROM disk, insert the distribution disk into the CD-ROM drive and restart the computer.
* If the computer doesn't have a working operating system and can't boot from its CD-ROM drive, insert a bootable floppy disk that has CD-ROM support into the A drive and restart the computer. When the MS-DOS command prompt appears, type d: to switch to the CD-ROM drive (assuming drive D is the CD-ROM), type CD \i386 and then type winnt.
As the Setup program proceeds, it leads you through five distinct installation phases: Collecting Information, Dynamic Update, Preparing Installation, Installing Windows, and Finalizing Installation. The following sections describe each of these installation phases in greater detail.
Phase 1: Collecting Information
In the first installation phase, the Setup program asks for the preliminary information that it needs to begin the installation. A wizard-like dialog box appears to gather the following information:
* Setup Type: You can choose to perform a new installation or an upgrade.
* License Agreement: The official license agreement is displayed. You have to agree to its terms in order to proceed.
* Product Key: Enter the 25-character product key that's printed on the sticker attached to the CD-ROM disk case. If Setup says you entered an invalid product key, double-check it carefully. You probably just typed the key incorrectly.
* Setup Options: You can click Advanced Options to change the file locations used for Setup, but you should stick to the defaults. If you need to use accessibility features, such as the Magnifier, during Setup, click Accessibility Options and enable the features you need. In addition, if you want to change the language setting, click Primary Language and make your selections.
* Upgrade to NTFS: If you want to upgrade a FAT32 system to NTFS, you need to say so now.
Phase 2: Dynamic Update
In the next installation phase, Setup connects to Microsoft's Web site via your Internet connection and checks to see whether any of the installation files have been changed. If so, the updated installation files are downloaded at this time. If you don't have a working Internet connection, you have to skip this phase.
Phase 3: Preparing Installation
In this phase, the computer is restarted and booted into a special text-mode Setup program. After the Welcome screen appears, Setup proceeds through the following steps:
* Partition Setup: Here, you're asked to choose the partition that you want to use for the installation. You can reconfigure your partitions from this screen by deleting existing partitions or creating new ones. In most cases, you'll want to install Windows into a single partition that uses all available space on the drive.
* Delete Existing Windows installation: This screen lets you choose whether you want to delete your existing Windows installation or leave it in place. You should choose to delete it, unless you want a multiboot installation.
* Convert to NTFS: If you elected to convert an existing FAT32 partition to NTFS, the conversion will take awhile. This step is a good time to get a fresh cup of coffee.
* Copying Files: Now Windows copies its installation files onto your hard drive. This step also takes awhile.
Phase 4: Installing Windows
Now that the drive has been set up and the installation files copied, Windows Setup reboots your computer back into Windows mode and begins the actual process of installing Windows. You're taken through the following steps:
* Installing Devices: Windows automatically examines every device on the computer and installs and configures the appropriate device drivers. This step can take awhile.
* Regional and Language Options: In this step, you're asked to enter information about your region and language. If you're in the United States, you can accept the defaults. Otherwise, you can change the settings appropriately.
* Personalize Your Software: In this step, you can enter your name and your company name. Your name is required, but the company name is optional.
* License Modes: In this step, you choose whether you purchased per-server or per-device/per-user licensing. You can change this setting later, but you can change the setting only once. If you're not sure, double-check the invoice that Microsoft shipped along with the software.
* Computer Name and Administrator Name: Enter the computer name and Administrator account password here. Be sure to write down the password and keep it in a secure location. You'll be in serious trouble if you forget it.
* Date and Time Settings: If the date and time information is incorrect, you can change it here.
* Network Settings: In most cases, you can select the Typical option in this step to install the network features that are used most often: Client for Microsoft Networks, Network Load Balancing, File and Printer Sharing for Microsoft Networks, and Internet Protocol (TCP/IP). If you don't want to use these defaults, you can select Custom Settings and then configure these features yourself.
* Workgroup or Domain: Next, you're asked whether the computer is part of workgroup or a domain. Choose the appropriate option and enter the workgroup or domain name.
* Copying Files: Now Windows copies files, updates the registry, and ties up any loose ends. This step can take a long time, so you may want to go for a walk.
Phase 5: Finalizing Installation
To complete the installation, Setup saves your settings and reboots the computer one final time. When the computer restarts, press Ctrl+Alt+Delete to bring up the Log On dialog box. Enter the password you created for the Administrator account, click OK, and you're logged on.
What software can be broadly classified into operating system or application software?
operating system and application sofeware