Consumer Electronics

Well, I know how, but it's not a good idea as it will make the laser produce more ir radiation, which is not good for you at all. I recomend buying a new laser. techlasers.com is the best, i just bought the 125mW infiniti, and its amazing. Also,you can replace laser diodes inside the red laser pointer,laser diodes are available on freaklasers.com

Not a lot of info here, but if it's a battery operated device, just disconnect (remove) the battery for a few minutes. It should bring about a `hard reset` of the microprocessor.

i depends on what type you prefer like my favorite is grass type yours could be water maybe fire HOPE THIS HELPED A LOTREMEMBER CHOOSE THE ONE YOU PREFER

A new print cartridge should do that for you. Unfortunately, most printer manufacturers report a low ink level FAR sooner than they really should. Often there is still more than half of the ink left in the cartridge when they start reporting that you should get a new cartridge.

They are in the business of selling print cartridges and they almost give away the printers. They try to get you to buy replacement cartridges long before you need them.

If you can, just turn off the ink level reporting feature and have a spare set of ink cartridges waiting.

1. Explain NOR gate as Universal Gate

A NOR gate is a simple OR gate with an inverter (NOT gate) at the output.

NOR gates are considered Universal Gates because thay can be configured in a few different ways.

Connecting the inputs on a NOR gate will result in a NOT gate (inverter).

Connecting the above to the output of a NOR gate results in an OR gate.

Use a pen or similar object to press and hold the reset button on inside of the door for 30 seconds.

Rechargeable batteries will store for short periods of time, but I suggest you fully charge it first. Batteries will also, over a period of time discharge themselves while in storage, so it should be recharged from time to time. How often? It depends on the type and size of the battery.

Most default codes for bluetooth accessories of any sort are 0000

Packs,yep..

Captive Works CW-600s premiun error display E011 and E029 please some help us. thanks

If your Bose system is working correctly, chances are that the impedence of your headphones are loading down the output causing the lowered volume.

I'd suggest you try a different set of headphones and see if that helps. Maybe try a lightweight set from an Ipod, portable CD player, etc. and see if it improves. In many cases, the older 8 ohm headphones generally don't work too well with today's audio equipment.

Biometrics is not as safe as you might wish, they hack your finger off and use it to enter a home, haven't you watched enough tv yet?

the brave little toaster

Yes

If you install an App called PingChat you can send pictures to your friends or yourself

PingChat is found on the App Store and The Blackberry App World

P.S You'll need two accounts to transfer the pictures

If this is the Victorian Canal area, the hammer is between the two bollards near the canal. If this is the Roman Cottage area, the hammer is on one of the columns leading to the garden. If this is the Roman Arena area, the hammer can be found on the chariot's wheel. If this is the Secret Chamber area, the hammer is on one of the arch's pillars. If this is the Labyrinth Garden area, the hammer is on the stone pathway.

You can also find a wooden hammer in the Sacrificial Altar area, as the ear of the jaguar head statue in the lower left area.

I think you answered that question yourself, when you said, `hot wire', which usually means the positive battery power lead.

SILICON same as any other diode but with different characteristics

You go to the NEC and look at the chart for developed length and the ambient temperature and the load factor and if it solid or stranded wire as stranded allows for more voltage

The difference between a Microphone (shielded) cable and a normal speaker cable is that, When we use a microphone we use a balanced or shielded cable (with the three pins, XLR or cannon), not a normal two wire speaker cable. We use this because the single coming from the microphone is at mic level, below LINE level (less than 1 volt). The shield on the mic cable is connected into the mixer or amp. The shield wire (RF, Radio frequency interference) single its 'waves' are then flipped (reverse phase) to cancel the interference out, any excess interference is then taken to the earth wire. With out a shielded cable you would hear annoying interference eg. The typical phone beep (please turn phone off). Speaker cable does not need a shield because the signal coming into the speaker is above MIC level and RF interference can't get in (it isn't loud enough) so there is no RF interference and no need for a shield. Hope that has been a help!

from 13 to 15 V approx

Depends on the antenna, frequency, the reader power, and the design.

Passive RFID's have a range from a few mm's to a few meters.

In general, low frequency = near field rf = short range, higher frequency = far field rf = longer range.

EPC HF near field tags have short ranges of less than 1 meter.

EPC UHF tags are typically 1-2 meters reliable read. Far field range is very complex and it is possible to have multipath reflection arrangements where 10 meters may work... sometimes.

With illegally high power transmitters, and large antennas, far field tags can be reliably read to tens of meters or more for non-commercial designs.

Semi-passive RFID's can be read over hundreds of meters.

Active RFID's are limited only by their transmit power and antenna design.

Unless the knee(s) are directly above or below the detector's coil (which should not happen) there's no reason they would interfere.