0
Dodge Ram
The Dodge Ram is a large pick-up truck produced by Chrysler from 1981 to present. The car, which features a front engine and rear/four-wheel drive, was named “Truck of the Year” three times by the Motor Trend magazine.
13,744 Questions
How much HP does a 1995 5.9 cummins diesel have?
The 1995 5.9 Cummins diesel engine, commonly found in Dodge Ram trucks, produces approximately 180 horsepower in its standard configuration. However, in some applications, particularly in the heavy-duty versions, it can produce up to 215 horsepower. The engine is well-regarded for its durability and torque, making it popular among diesel enthusiasts.
Where is the thermostat on a Dodge Ram van 3500?
Follow the main hose to the top of your engine .Take of the two screws and there it is replace with new thermostate and gasket .Use blue gasket sealer.
How do you turn off air bag light on 95 dodge ram 1500 pickup?
If the light is on the airbag system is disabled, and there's a problem. You can't just shut it off. Hook up a scan tool and retrieve the fault code and fix it right. or the airbags will not deploy if you're in an accident.
Prolog:
I'm pretty sure we all know to fix the problem, but most of us just left the airbag lock unplugged or the seat unplugged when we turned the key on. I too am searching for a cure. I know Nissan titan's you can key on key off 3 times to reset.
Can a fuel injected 1990 318 be changed with a carburated 318 out of 1976?
no because it is a older model an the fuel injection on th 318 1976 is bigger than the 1990 318
Trouble code P0573 means: Brake Switch No. 1 Stuck High/Off Should have no effect on the alternator.
What does error code P0700 mean with regards to a 2003 5.9 cummins diesel refer to?
It means that there is a code present in the transmission computer.
Distributor cap wiring order for a dodge 1998 318 5.2L?
1 - 8 - 4 - 3 - 6 - 5 - 7 - 2
The distributor rotor turns CLOCKWISE
The marked # 1 position on the distributor cap faces towards the FRONT
The engine cylinder locations are numbered :
firewall
8 - 7
6 - 5
4 - 3
2 - 1
front
Top dead center on a 318 dodge?
TDC is top dead center it pretains to the position of the pistons. The number one piston has to be TDC when you put on the timing chain or belt for it to work properly.
Where is the oil pump on a 1998 dodge ram pickup with a 318 engine?
In the oil pan......bolted to the block.
What is a pcm and what does it do on a 1990 B250 Dodge van?
Powertrain Control Module
It's the computer mounted to the firewall with the three sets of wires going to it. It handles all sensors, warning lights, transmission shifting (if electric), spark ignition, electronic choke..... Pretty much everything electric is handled by the PCM.
How do you install the back glass in a pick up?
you need to be more specific..year, make and model would help Generally speaking, remove old gasket and glass if it hasn't already been removed for you. Put the new gasket on the frame, insert glass, pry gasket over so that the glass is seated in the channel. Additionally, to see pictures and a description of a Ford F-250 back glass replacement visit the fordmuscle.com blog (follow the link below)
Don't have a manual how do you reset maint req light on 99 accord?
With the key in the off position, press and hold the mileage reset button. Continue to hold the button in, and turn the key into the accessory position. Hold button in until 'Maint Req'd' light goes out (about 5-10 seconds).
Will a 46re transmission fit to a cummins?
Terrible idea.. the 46RE transmission was not designed to handle the kind of torque produced by the Cummins diesels.
How do you time a 1985 Dodge pickup with a 318 motor?
like any other engine turn the engine until the number one piston is top dead center and then install the distributor where the rotor button is on the plug wire for number one cylinder it should start there and final adjust by twisting distributor until running smooth
How do you change headlights on 2011 dodge ram 1500?
Purchase replacement lamps first, before disassembling the vehicle. See the Sources and Related Links section below.
Open the hood.
Remove plastic radiator cover.
Remove 4 10mm bolts that hold the grill in place.
Carefully pull the grill from the bottom to remove from the vehicle. There are two clips that hold the bottom in place.
Remove two 10 mm bolts that hold the headlight in place.
Open the access cover in the wheel well and push the white plastic tab holding the back of the headlight up.
Remove headlight assembly, open access cover and change headlight.
Reverse for reassembly.
1997 dodge ram 1500 5.0 engine block heater location?
1997 dodge ram 1500 2wd 1500 engine block heater location
How can you disable the seat belt reminder bell on a 2006 Jeep Grand Cherokee?
Usually when you put your seat belt on it'll turn off the reminder.
The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert)
1. Turn the ignition switch to the OFF position, and fasten the driver's seat belt.
2. Start the engine, and wait for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle and re-buckle the driver's seat belt at least three times, ending with the seat belt buckled, within 10 seconds.
4. Turn off the engine. A single chime will sound to signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be recactivated by repeating this procedure.
