What is the need of segmentation in microprocessor 8086?
At this point you may be wondering why Intel designed the 8086 family devices to access memory using the segment: offset approach rather than accessing memory directly with 20-bit addresses. The segment: offset, scheme requires only a 16-bit number to represent the base address for a segment, and only a 16-bit offset to access any location in a segment. This means that the 8086 has to manipulate and store only 16-bit quantities instead of 20-bit quantities. This makes for an easier interface with 8- and 16-bit-wide memory boards and with the 16-bit registers in the 8086.
The second reason for segmentation has to do with the type of microcomputer in which an 8086-family CPU is likely to be used. In a timesharing system, several users share a CPU. The CPU works on one user's program for perhaps 20 ms, then works on the next user's program for 20 ms. After working 20 ms for each of the other users, the CPU comes back to the first user's program again. Each time the CPU switches from one user's program to the next, it must access a new section of code and new sections of data. Segmentation makes this switching quite easy. Each user's program can be assigned a separate set of logical segments for its code and data. The user's program will contain offsets or displacements from these segment bases. To change from one user's program to a second user's program, all that the CPU has to do is to reload the four segment registers with the segment base addresses assigned to the second user's program. In other words, segmentation makes it easy to keep users' programs and data separate from one another, and segmentation makes it easy to switch from one user's program to another user's program.
Natalie Gulbis is the sexiest womans golfers, followed up by Paula Creamer and Morgan Pressel
Agree with Natalie Gulbis and Paula Creamer. Morgan Pressel is pretty though but her body's not really in shape as the first two mentioned.
What is future scenario and scope of pharmacognosy?
This is precisely the question that was addressed at the Asilomar conference, (similar in spirit to the "TED" conference in Monterey with regard to computers and technology in general). The outcome of Asilomar was the self-regulation of this industry with a set of guidelines that were tied to rules for federal funding of research.
The scope of biotechnology is huge. The future scenarios are probably far beyond our wildest imagination. A few examples: - There are artists and architects collaborating with biochemists and geneticists to theorize about the possibility of creating living houses for humans. These houses would be made of living plants genetically engineered to be perfect habitats living symbiotically with humans, including cool or warm climate controls, plumbing (fresh water and waste digestion), food provision, and light energy capture, storage, and production. Different textures, colors, and functions are unlimited in theory. - Researchers have recently isolated the genes related to schizophrenia and are seeking funding for research leading to the investigation of a cure or treatment. - Scientists are racing to save the honeybee from a viral plague that is eradicating it from the face of North America and threatening our supply of honey. They are looking into the DNA of the virus hoping to stop it in its tracks.
What universities offer masters or diploma in dermatology?
For colleges and universities within the United States and its territories, you can obtain this information by clicking on the related links section (College Board) indicated at the bottom of this answer box and using the sites College MatchMaker search engine. You can research colleges and universities by name, or by programs of study, or by geographical location, size, or combinations of part or all of them. The site will provide you with a list of institutions based on your request. It will give you the schools background, accreditation, degree offerings, programs of study (majors), entrance requirements, tuition and fees, financial assistance, room and board, athletic programs, school activities, etc., and a link to each institutions official web page. Practice navigating this site. It will be well worth the time and effort.
WARNING!!!
When choosing a college or university within the United States, make sure the institution has a regional accreditation. With a regional accreditation you can be assured the coursework and degree you complete will be recognized by all other colleges and universities as well as employers. Below I have listed the six regional accrediting agencies and their geographical areas of responsibility. I am disclosing the below so you do not become a victim of educational scams, institutions that are nothing more than diploma mills, or that do not have the best accreditation, and are eager to take your money for a degree that is worthless. Make sure the institution is accredited by one of following responsible agencies.
Regional Accreditation Agencies
· Middle States Association of Colleges and Schools - Educational institutions in New York, New Jersey, Pennsylvania, Delaware, Maryland, the District of Columbia, Puerto Rico, and the US Virgin Islands, as well as schools for American children in Europe, North Africa, and the Middle East.
· New England Association of Schools and Colleges - Educational institutions in the six New England states (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont).
· North Central Association of Colleges and Schools - Educational institutions in Arkansas, Arizona, Colorado, Iowa, Illinois, Indiana, Kansas, Michigan, Minnesota, Missouri, North Dakota, Nebraska, Ohio, Oklahoma, New Mexico, South Dakota, Wisconsin, West Virginia, and Wyoming.
· Northwest Commission on Colleges and Universities - Postsecondary institutions (colleges and universities) in Alaska, Idaho, Montana, Nevada, Oregon, Utah, and Washington.
· Western Association of Schools and Colleges - Educational institutions in California, Hawaii, Guam, American Samoa, Micronesia, Palau, and Northern Marianas Islands.
· Southern Association of Colleges and Schools - Educational institutions in Virginia, Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Alabama, Tennessee and Texas.
all the courses under distance education institute at Madras university are recognized by UGC and DEC . So they must be recognized by all the Indian universities/ colleges.
Related Answers:What are the jobs for MSc nanoscience and technology students?
There are jobs in Government Sector as well private Sector. In government sector a fresher with a Postgraduate Degree can expect remuneration in the range of at least INR 20,000-30,000. Depending on qualifications, institute of study and work experience remunerations can go up to even uptoRs. 1 lakh per month and even more! Besides remunerations a nanotech professional has great opportunities for international exposure and other such perks.
They can work in the field of nano-medicine, bio-informatics, stem cell development, pharmaceutical companies, nano toxicology and nano power generating sectors.
Considering the importance of research and development (R& D) in this new area, Indian industry has focused on nanomaterial and many scientific institutions have started research and development activities in the field. The CSIR (Council of Scientific and Industrial Research) has set up 38 laboratories, across the country, to carry out research and development work in this field. Those with Ph.D in Nanotechnology will have vibrant opportunities in the Research & Development sectors. Some of the companies in India that provides job prospects are Cranes Software International Limited, Bangalore; Monad Nanotech Pvt. Ltd, Mumbai; Velbionanotech, Bangalore; QtechNanosystems (P) Ltd, Bangalore; Innovations Unified Technology, Mumbai etc.
Is msc physics is equivalent to msc electronics?
Yes, of course
Even M.Sc. Physics (Specialization in Electronics) has higher rank than B.Tech in any stream.
Because M.Sc. degree is awarded after 5 years (B.Sc.+ M.Sc.) from 12th while B.Tech is awarded after 4 years from 12th. so M.Sc has higher precedence.
M.Sc. is a Master Degree, while B.Tech is The Bachelor Degree. so it is also makes the importance of M.Sc. over B.tech.
Those Students who complete their M.Tech, MBA, MCA after M.Sc. has higher weightage than B.Tech students......
I think now you are clear with this explanation about the equivalence of B.tech and M.Sc. Physics or other stream.
West wishes,
Prof. B.D. Joshi
IISc. Banglore
What is Msc biochemistry first year first semester exam schedule in osmania university?
ou msc chemistry 1st year supply exams time tabule
Does vinayaka mission university conducts msc in optometry by distance mode?
but there are many other institute which are offering M.Sc in distance mode you can search them though the following site
Msc IT is valid masters degree program. It is equivalent to B.Tech., MCA.
Regarding the approval one need to check it with the college that whether or not they have the approval for running the course.
If you are taking admission directly in any University campus you need not worry about AICTE, but should check for UGC approval alone. But if you are taking admission in any college affiliated to some university then apart from checking for UGC's approval (University level) you will need to check for the approval of the Course by AICTE (at college level).
Hope that helps. Choose wisely.
Shashank Chaturvedi
shashank20000@gmail.com
Msc in math from distance education of annamalai university ugc recognised?
We offer very affordable and industry oriented Distance & Online MBA, BBA & BCom programs from Annamalai University. MBA with specializations in Banking, Finance, Marketing, Human Resource & Retail Management.
Course duration for MBA is 2 Years & for BBA and BCom is 3 years.
The courses are approved by UGC & Distance Education Council & is valid for all Central & State Govt. jobs.
Admission for 2012 batch is open. For Further details call +919633421488 or mail us at centumcochin@hooblacyber.com
Model paper of msc chemistry in ou?
^E+W=Q.....................1 Q2-Q1/Q2=T2-T1/T2.....................2 W=Q2-Q1 Given W/Q =T2-T1/T2 T2-T1=^T and Q=^W ^w/Q=^T/T Q=T{^W/^T} PUTTING THE VALUE EQI {1} ^E+W=T^W/^T [GIBBS HELMHOLT EQUATION]
Applied genetics is the process of using gene theories to attempt to actually produce a genetic product.
An example of this would be genetically engineered seeds.
What is the role of an electrical engineer in the industries and power sector?
The main role of electrical engineers in construction projects is to supervise the electricians in handling all the electrical works considering the safety and quality requirements. The electrical engineer in the construction site also reads and studies the electrical plans (usually done by electrical design engineers) and implement it in the site and sometimes do necessary actions whether to correct or to improve the design. They coordinate with other electrical engineers in the implementation of the electrical system design and also with other engineers of different fields, such as civil and mechanical engineers, to make the construction job easier.
What is difference between MSc and MTech?
The MCA is a postgraduate degree that concentrates on the most recent tools and programming languages for building better and faster programmes. After completing two years of engineering education, students may apply to the MTech professional postgraduate engineering master's degree programme.
Why shouldn't high speed mills be used in preparing the sample for moisture determination?
Well it can simply affect the moisture through the heat that been generated by the high-speed mill
What do you call someone with a Ph.D?
An individual Joe Smith with a PhD would be addressed as Dr Smith or Joe Smith, PhD but not Dr Joe Smith, PhD.
Msc it and ca is equivalent to be and mca?
My answer here would be that it both has the same value in the job market. MCA is a course which has been for quite a long time. It is very well know because people from other fields cans also enroll them selves in it. The portion is quite similar to what u study in Bsc IT or Bsc Comps.
If u opt for Msc IT it would be an advance version of what you have studied in Bsc. It is course which is catching up these days as many multinational companies like TCS, Infosys, Wipro, Igate Patni have started recognising this degree as well as this is quite new course as compared to MCA.
Both courses are good, ultimately its your decision which one you want to opt for.
Can you do MSc as well as LLB together?
LLB's are rarely awarded on their own. Most Australian universities will require undergraduates to take a course of study outside of the law faculty.
A four law degree is typically 400 credit points. 100 points must be taken out of faculty and a BA/LLB would typically be 500 credit points.
What is the default format for an .msc file?
By default, the Computer Management console that is standard in Windows XP opens in User Mode - Full Access.
Source: http://www.theeldergeek.com/microsoft_management_console.htm
What is MSc in Information Systems?
Typically, within the field of education it means a masters of science degree. Typically they are the same. Within the United States it is a masters of science abbreviated M.S.
For the source and more detailed information concerning your request, click on the related links section (Wikipedia) indicated below.
How do you protect product design?
Product designs can be protected in many ways and are all pretty much standard throughout the world, thanks to the harmonizing trend in intellectual property laws.
Some of the most common ways are through design patents, and industrial models. Some countries also accept 3-D trademark applications, which serve a similar purpose.
Intellectual property offices at the national level may offer more specific information. There are also comparative specialized publications (like Katzarov's Manual on Industrial Property), which offer detailed information in a country to country basis. Patents of invention normally do not extend to the protection of the design itself, unless there is an inventive, novel and industrially applicable claim involved. Under some circumstances even copyright protection might serve to protect certain product designs that are more aesthetic in nature. Although care must be employed here, as the idea itself is not subject to protecting, but just its particular expression.