0
Nissan Quest
The Nissan Quest is a minivan produced by Nissan since 1993. It was a successor to the Nissan Axxess and Nissan Vanette. The fourth-generation Nissan Quest features a continuously variable transmission and a 3.5L VQ series engine with 260hp.
792 Questions
What fuse do you replace for the interior lights in a 2004 Nissan Quest?
For a 2004 Nissan Quest, the fuse that controls the internal lights is a 15 amp fuse labeled "BCM Battery Saver". It is in the cabin fuse box (below and to the left of the steering column) and on the lefthand fuse column 3rd fuse from the bottom.
How do you reset the oil and tire rotation alarm indicator on a 2004 Nissan Qwest SE?
Do you know how to look at the tire pressure indicator and oil mileage indicator? It is on the same pages as those. Click on the "reset" buttons on those pages. Curt
Why do you have to constantly fill the antifreeze in your 1994 Nissan Quest?
you may have a loose seal or a pinhole leak i would get it checked out asap
Where is the radiator drain plug for a 1999 Nissan Quest?
DRAIN PLUG IS ON RIGHT SIDE OF RADIATOR. YOU NEED TO REMOVE THE PLASTIC PROTECTION UNDER THE RADIATOR TO GET TO IT.
Where are the timing marks 1999 Nissan Quest 3.3l?
the cam closest to the front of the van there will be a little bump if the back cover is dirty u will have to clean it in order to see it it should be at about 1:00 and there is a small dimple on the cam sprocket line the two up then on the back cam sprocket the bump is at the same 11:00 it really hard to see after u get those lined up down at the bottom on the crankshaft sprocket u will see the dimple on the sprocket line it up will the mark at 5:00 it looks like a small cut in the end of the half moon housing then the marks on the belt should line up perfect
hope this helps
about 1500
How do you replace the air filter on a 1998 Nissan Quest?
Take it to a Jiffy Lube or an Oil Can Henrys
Where is the speed sensor on a 2000 Nissan Quest?
"http://wiki.answers.com/Q/Where_is_the_speed_sensor_on_a_2000_nissan_quest" and what is the sprk plug gap in inches
How do you deactivate the horn on a 1993 Nissan Quest?
Disconnect the fuse that goes to the horn but also that fuse may power something else also. Mr brown
What kind of transmission does the 2009 Nissan Quest have?
The 2009 Nissan Quest has a 5-speed automatic.
What kind of transmission does the 2005 Nissan Quest have?
The 2005 Nissan Quest has a 4-speed automatic.
My 1994 Nissan Quest won't start?
If your 1994 Nissan Quest won't start, you might have a dead battery or a bad starter. You could also have a tank that is empty of fuel.
Why is catalytic converter overheating?
A catalytic converter overheats due to an excess of unburned hydrocarbons reaching it through the exhaust stream for an extended period of time. This overworks the catalyst bed inside the converter, which then starts to become plugged, generating even more heat as it does. In short order, the converter will become a significant exhaust obstruction, causing the engine to overheat and lose power. Eventually, this will prevent the engine from running, due to the inability of the exhaust to escape, denying the engine the opportunity to "breathe"...
What is the turning circle of the 2006 Nissan Quest?
The 2006 Nissan Quest's turning circle is 40 ft..
How can you disconnect alarm system Nissan quest 2005?
How car i disconnect the alarm system of Nissan quest 2005. Disturbing the neighbours
Normally it's right beneath the steering wheel in the left side it's a little box that you just pull out ...
What year did the body style change on a Nissan Quest?
I think the changes came in 1999, then Ford quit making the Quest and Nissan took over in 2004. If i recall, there was no 2003 Quest.
I would just buy a replacement FOB form eBay and program it myself. Go to programyourremote dot com for instructions! I did with mine and worked! If you still want to disable you have to take out the big "fuse".
Why does it sound like a bird chirping - squealing under the hood on a Ford Taurus - Mercury Sable?
Found IT! I just had this problem with my 2002 Taurus. It was a constant chirping that was fairly loud, and would speed up with engine speed, and never go away.
It turns out that the engine in my car has a (I believe I have the name correct) camshaft sensing device. When it goes bad, it's because the shaft sits in a bushing, and the bushing has worn out. The mechanic told me Ford used these only on this car, and a truck. Why they used a bushing instead of a bearing makes no sense to me.
If you get a cam sensor code, consider if you've been hearing a squeak noise like a belt chirp that doesn't go away when you replace the belt. If so, use a prybar or similar tool to press down on the synchro. If the noise goes away replace both the sensor and the synchro.
Depending on the mileage, it's fairly certain you need to replace the belt. If the mileage is fairly high, it would be a good idea to replace the belt tensioner at the same time.
The tensioner is a spring-loaded pulley that keeps tension on the belt and it, too, wears down in time.
That would be the Synchronizer Assembly. Its actually a "dummy distributor" that's located under the throttle body, under the black, wide flat wiring harness cover.
The cam position sensor is mounted on top of the assembly. Its a major chore to change out and really needs to be fixed before it seizes up and does more damage.
What does a P0300 for 06 Nissan Quest mean?
Trouble code P0300 means: Random/multiple cylinder misfire detected
What is the sizes of a front windshield wiper on a 2006 Nissan Quest?
The 2006 Nissan Quest wiper blade sizes are 28" drivers side, 18" passenger side and a special 14" rear wiper that is difficult to find in the stores. Do not buy wiper blades by length-only however. Since there are currently over 22 different wiper arm attachments - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment. See Sources and Related Links below for more information.
