answersLogoWhite

0

🚗

Miscellaneous Vehicles

Miscellaneous vehicles may include a motorcycle or any similar vehicle, a motor home, a golf cart, or an all-terrain vehicle. Some of these are designed for personal use and should not be used on public roads.

500 Questions

How can i get a used car donated to me free?

User Avatar

Asked by Wiki User

Generally the cars are donated to those that are have a disability, or are homeless. The cars are given through various local charities.

How do you build a dog sled?

User Avatar

Asked by Wiki User

There is not a whole lot of information available as far as plans for dogsleds go. Probably the best way is to find a sled that you can look at or take measurements from and then build from there. I have found some basic information on line about sled building but even as a woodworker with 30 years experience I still did not feel it was enough information to build from.

What year was the horse carriage invented?

User Avatar

Asked by Wiki User

The horse drawn carriage was invented in Hungary in the Fifteenth Century, it was built to carry a Princess to her wedding but this early design had no steering as such and had to be dragged sideways by its team of horse to turn a corner. Development was slow but eventually the front axle was mounted on a turntable to provide steering and the horse drawn waggon was a semi-practical, if not very comfortable vehicle. Suspension systems evolved slowly but by the early nineteenth century most of the problems had been solved and the improvements in road construction and maintenance made the horse drawn carriage a viable form of transport.

in hungary

In the 16th century the carriage was invented, but people have used carriage like vehicles since the 1st century.

in the 1400`s the horse carriges was invented

What are the ways of disposing garbage?

User Avatar

Asked by Wiki User

The different ways of disposing garbage are-

[a]we can try to make less garbage as possible.

[b]We can reuse , recycle and reduce te use of plastic.

What do people amsterdamn eat?

User Avatar

Asked by Wiki User

There are many foods that the people eat in Amsterdam. Some foods include pannekoeken, poffertjes, Vlaamse frites, stroopwafel, and various cheeses.

Is there any way you can find ice cream truck routes?

User Avatar

Asked by Wiki User

Yes. actually

  • your options are as follows.
  • sometimes they run out of an actual stand you could get the name and look it up
  • you could call the number on the side of the truck (if relevant)
  • go to the stand and ask where is your route.
  • your last resort follw the truck.

What is safer a chicken tractor or a chicken coop?

User Avatar

Asked by Wiki User

This all depends, if your chickens live in the tractor full time they should have a co-op built on to the tractor so they can get out of rain and have a safe place to go at night. A tractor is mobile while a co-op and run is not so a co-op and run would be safer as you can beef up security from predictors digging under and you use stronger materials that weigh more. If you are useing a tractor you don't want it to be to heavy to move that would defeat the purpose. So I guess to sum up the awnser a co-op and run can be safer.

What goods does Canada export to Australia?

User Avatar

Asked by Wiki User

Australia is able to supply most of its food needs. However, exotic fruits, vegetables and prepared and tinned foods are imported into Australia from all over the world to cater for its multicultural tastes.

Can you recycle in small ways?

User Avatar

Asked by Wiki User

Yes, you can bring all your glass and beer cans to the local bottle bank, and most towns will have a recycling centre where you can bring tetra paks, food tins, cardboard and even plastic. You could also invest in reusable bags (now widely available) for supermarket shopping, so you don't use up the plastic ones given away free at the till. This will dramatically reduce the amount of plastic you use up and the amount you throw in the bin.

How do you remove the rear brake drum from Kawasaki Bayou 220?

User Avatar

Asked by Wiki User

How to remove.

1988-1995 Kawasaki Klf Bayou 220 rear brake drum.

1. Remove the rear wheel

2. Pull the cover off the grove in the end of the brake drum.

3. Remove and discard the axle nut cotter pin.

4. Loosen and remove the axle nut and washer.

5. Slide the brake drum off the rear axle and remove it.

Note: The brake drum should slide off the rear axle with little or no effort. If the brake drum is tight, Loose the brake adjuster.

I hope this help's.

Worlds biggest ship?

User Avatar

Asked by Wiki User

The 'Mont' has a displacement of 825,614 Gross Laden Weight in metric tons. Unladen 564,743 tons

How to replace solenoid in a club car?

User Avatar

Asked by Wiki User

The best way to do this is to take into a mechanic. They will have all the right parts to help you out with this.

How do you check the oil on a kawasaki mule?

User Avatar

Asked by Wiki User

if your KX 125 is a two stroke (which it most likely is. you can tell by the exhaust pipe coming from the motor. if it is huge, then it's a two stroke)

Two Stroke motors get their oil from the gas you put in the tank. the mix ratio tells how much oil is supposed to be mixed with what amount of gas. you do not check the oil in a two stroke. you just simply add it to the fuel every, i mean EVERY time you fill up.

How to set the timing on a Yamaha banshee?

User Avatar

Asked by Wiki User

You start off by setting the piston to TDC (top dead center). there is a "T" on the magneto to assist with that. once the motor is at TDC you take the exhaust valve(front one) , there are 3 numbers with arrows. take the #1 arrow and point it toward the front of the motor at the gasket surface and the #2 arrow will be pointing strait up at a roll pin of the cam chain from that roll pin, counting it as #1 count out 15 pins. on the intake valve there are also 3 numbers and arrows. on the 15th pin set the #3 arrow of the intake valve. Now the timing is set put it back together using all torque specs. the bolts are very easy to strip.

How do you stop the seat belt alarm from ringing when seat belt is not latched on the 2007 E250 van?

User Avatar

Asked by Wiki User

Easy fix. Found this somewhere on the net and it worked for me. 1)Start your car. 2)Buckle and unbuckle the seat best as fast as you can for 1 minute, and I mean fast. 3)Turn your car off, then back on. This should fix your problem.

What are some things with wheels that start with the letter h?

User Avatar

Asked by Wiki User

· Hatchback

· Highlander (Toyota)

· Honda

· Horizon (Plymouth)

· Hudson Hornet

· Hummer

· Hyundai

How do you silence a dirt bike?

User Avatar

Asked by Wiki User

Put a potatoe in the exhaust pipe

Can you build a go cart using a lawn mower engine?

User Avatar

Asked by Wiki User

I have two of them in my garage right now. They are 5.5 hp engines. You need to put a clutch on the output shaft that will allow the engine to turn at idle, but as soom as you give it gas the clutch will disengage and it will turn a chain that is connected to a sprocket on the rear axle. I hope this helps you.Brad.

but this is only the beginning. lawn mower engines have a vertical crankshaft, and a go-kart needs a horizontal. converting the two is not as easy as it seems. if you have a 4-stroke, you need to find some way of re-arranging the oil sump/oil pump, so that it works horizontally. not only that, but you have to reposition the carburettor so it is up the right way, if you can just turn it around you are lucky, but if your not, your going to have to drill and tap extra holes. if you do not do this, it will not work.

if you have a 2-stroke, you don't have to worry about the oil, as it is in the fuel, but you still have to reposition the carburettor

just go to http://gokartguru.com/go_kart_building_202.php

actually, you can make your own go kart with a vertical engine, but you need to have the rear end of a garden tractor to do it because it already has the pulleys on the axle

thanks,

Jake

EDIT: I just recently built a go cart out of a lawn mower. I used a vertical shaft engine and a external transmission from a riding lawnmower. Just slip a belt around the shaft on the engine to the pulley on the tranny and whala!

What is the best 18 wheels of steel game?

User Avatar

Asked by Wiki User

18 Wheels of Steel Haulin' because can get more modifications from www.sheryo.user.fr than the newer 18 WoS American Long Haul.

How do you adjust the governor on a golf cart?

User Avatar

Asked by Wiki User

After the carb has been adjusted to proper specs and is running ok you can adjust the governor by bending the wires to either up the rpm or to lower it.

Also a better way without ruining the wires is to adjust the small screw that holds the governor piece in place. You can loosen that screw and push or pull on the governor to adjust the rpm. Usually pushing the governor will increase the rpm. You can always readjust, so you don't have to ruin the metal pieces connecting the carb and the governor