Choppers and Custom Motorcycles

most state require you to get it inspected and they will give you a plate.

It will vary from state to state. Try contacting your state DMV or a local motorcycle shop may be able to provide you with information.

In Pennsylvania, there is a set of forms required to be submitted to the state, MV426B. The bike must be inspected by a inspection mechanic, photos of the bike must be submitted, a list of materials used and their sources will need to be listed, and all paperwork must be sent in.

Every state surely is different.

When u ride gas isn't getting the engine as efficient as it should so there might be a clog in ur fuel line or the carborator might need cleaning

The bike sold at the auction for $150,000, but I don't know who bought it.

A 200cc mini chopper would usually way about 250-300lbs

float height

A Motorcycle shop is trying to charge fees on a bike that is not repaird yet ? What are the rules and regulations on storage fees ?

No, not the way the original wheels were designed. The spoke holes will not hold air.

I have a 110cc mini chopper Jesse James and it didnt have a gov on it it ran 60-70mph the day i got it i have went on eBay and bought a NOS system for it, Now i have a 8g shot of NOS when needed yup hold on.. lol The nos comes in a disposable cartrage looks like a co2 for a bb gun and you can buy 10 for like 20$ on eBay.. you may want to check in to it any other questions my email is brockdorman@gmail

Ge894 should be the bulb

Price Chopper is received by utilizing different engines in order to getting the answer one needs or desperately desires and then what ones wants is achieved.

No, the factory has been chrome plating rocker covers for decades with no adverse effects. The most common cause of overheating is sitting still in traffic with the [air cooled] motor running.

If you suspect your motor overheats regularly, there are steps you can take to help protect it. First of all, if you're stuck in traffic at a dead halt on a hot day, shut the motor off until traffic starts moving.

If you're currently using fossil oil, switch to a good synthetic, like Mobil 1. Unlike fossil oil, synthetic oil won't start breaking down when it reaches 250 degrees.

If you don't have an oil cooler, install a reputable brand like Jagg. If you never ride below 55 degrees there's no need to include a thermostat.

Never block air flow to the cylinders with an elaborate spoiler or shroud.

Make sure ignition timing and air/fuel mixture are correct and there's a sufficient supply of oil in the tank. All of these can cause overheating.

i don't know, we also wanna know the prices

Hi, For oil the cross ref lugger northern light is : MECAFILTER E/H 4184 or PURFLUX LS275 For fuel filter i would like to find the equivalence

Arlen Ness

If you have to ask, most likely you didn't throw one

No. They did work with Harley on the Revolution engine which is based on Harley's VR 1000 racing engine. The nature of their task was to help make the race-only engine work well in a street bike.

WHAT BRAND DO YOU WANT OR CALL 814-454-2877 EMPIRE AUTO PARTS

7.5hp

Paint codes for the year were as follows:

Birch White 90303

Bronze Pearl 62074

Chrome Yellow 84454

Diamond Ice Pearl 37056

Jade Sunglo 3ct 193774/401515

Luxury Rich Blue 193774

Luxury Rich Red 75946

Racing Orange B/C 62685

Real Teal Flash 401419

Suede Green Pearl 400442

Viking Purple/Concord Purple Pearl 52788

Vivid Black 9850

White Highlight Pearl 92151/92152

Didn't find a list of Road King specific codes, but a little internet sleuthing should turn up the info.

It is an electrical device (and not a electronic device) which is used as a heating resistor to brake variable frequency drives (ac Drives) externally, (and nowhere related to changing any wave form).

1957

I have know idea what your asking me because I'm only 10. Sorry. I don't care how I got an account.

what model first of all. all HD oil tanks have a drain plug. It is not on the engine as previously discussed elsewhwere here because Harley has a dry sump engine.The oil is held in an oil tank and pumped into the engine then out and back into the oil tank. The drain plug, on the tank will be at the lowest point and generally accessable

The Pagsta bikes have a wire mesh (screen) filter that are simply cleaned with gas or blown clean using compressed air when y'all drain the oil. The filter sits on top of the drain plug bolt up inside the engine crank case.

REMOVE OUTER PRIMARY COVER. REMOVE JACKSHAFT NUT( THE SMALL NUT ON THE SMALL GEAR TOP REAR) TWO SCREWS(BOLTS) THAT RUN INWARD THRU STARTER BELOW OIL TANK REMOVE STARTER FROM BACK OF INNER PRIMARY. IF YOU BUY A HARLEY DAVIDSON SERVICE MANUAL, THE PROCEDURE SHOULD BE THE SAME AS HARLEY'S. LAKELIZARD