Computer Maintenance

Take the inside of the glove box out and look down and to the right and you will see it.

Begin by finding the current amount of cash you have, buy something or upgrade something....somehow change your cash amount. Then scan again for that value and continue this process until you have only a few results left. Then change the value as need be and freeze it.

To reimage your Acer Aspire 9500 laptop to factory settings you will need to insert the first recovery CD and reboot your laptop. If the laptop does not boot from the recovery CD, you may need to edit the boot order in the BIOS when the laptop first starts. Once your machine is booting from the recovery CD it will walk you through the restoration process.

Attempt to open them. If they open and there is no garbage in the display, they are not corrupt.

Go to the playstation 3 web site and select (support) on the left side of the page then select (error code) on right side of the page then input your code and sony will assist you in fixing the problem but most of the time you will be told to send in your ps3 (Dont due this without doing a little research it could save you time and money to solve this on your own).

post more questions about the problem give the message next time most of the codes come with a message this will make it easier for some one to help further easily.

hope this helped

SGT Weinbrenner

Personal preference - either form is acceptable !

Explain the extended structures of IAS computer with a diagram in computer and architecture bu William stalings

Yes, All compaq PC come with a recovery disc. If you cannot find and you need it, Usually they recovery image or ISO is located on a separate partition or you can find it on Compaq's website.

To find the actual wattage of an electrical component, you can calculate it by multiplying the voltage across the component by the current flowing through it, using the formula Watts = Volts * Amps. Alternatively, you can refer to the product specifications provided by the manufacturer, which usually list the wattage of the component.

The first discs that were made for computers were made from a thin material that bent easily. These were referred to as floppy disc then a smaller disc with a hard plastic cover was brought out to replace this which was originally meant to be referred to as a hard disc, however at around the same time the discs that computers ran on were also looking for a name and these ended up being called the hard disc and the new rigidly encased discs went back to being referred to as floppy discs.

If ever u print out document n the it print out is just line to me i have face such problem what i did is to troubleshoot the toner cartage n it was OK but if not toner problem then re-save your document and print age.

No. There are ISA, PCI, PCI-e and AGP architecture, and there are VGA and DVI ports.

Mapped network drive. In Windows networks, an external resource has the form "\\MyServer\MyFolder\MySubFolder\MyFile.doc". The folder part, "\\MyServer\MyFolder\MySubFolder", can be assigned ("mapped") to a drive letter, for example, "M:"; in that case, you refer to the document as "M:\MyFile.doc".

Mapped network drive. In Windows networks, an external resource has the form "\\MyServer\MyFolder\MySubFolder\MyFile.doc". The folder part, "\\MyServer\MyFolder\MySubFolder", can be assigned ("mapped") to a drive letter, for example, "M:"; in that case, you refer to the document as "M:\MyFile.doc".

Mapped network drive. In Windows networks, an external resource has the form "\\MyServer\MyFolder\MySubFolder\MyFile.doc". The folder part, "\\MyServer\MyFolder\MySubFolder", can be assigned ("mapped") to a drive letter, for example, "M:"; in that case, you refer to the document as "M:\MyFile.doc".

Mapped network drive. In Windows networks, an external resource has the form "\\MyServer\MyFolder\MySubFolder\MyFile.doc". The folder part, "\\MyServer\MyFolder\MySubFolder", can be assigned ("mapped") to a drive letter, for example, "M:"; in that case, you refer to the document as "M:\MyFile.doc".

Plug and Play is a technology that simplified attaching peripheral devices. In the past, you had to physically set the settings on the cards you installed. However, not everyone knew what the settings were set to, and they would install something else and there would be a conflict. The cards needed to use different IRQ, DMA, and base addresses. Plug and Play will negotiate with the devices and come up with the best settings that will allow everything to work.

there are two types of image processing.

1.analog 2.digital.

Buy a new keyboard.

Ok, it doesn't take Einstein to realise that ROM cannot be updated. So if you want the ability to upgrade an operating system, it can't be on ROM. Also consider disk costs v memory costs. Again, you do not need to be a Nobel Prize winner to figure it out.

It all depends on what you are converting from. One byte is 8 bits, so if there are 80 bits, you can safely say there are 10 bytes of data.

1024 bytes = 1 kilobyte

1048576 bytes = 1 megabyte

1073741824 bytes = 1 gigabyte

if there are 2 megabytes of data, to find the bytes, multiply by 1048576.

2 x 1048576 = 2097152

Some sources say that 1000 bytes = 1 kilobyte. this is incorrect, as computers work in base 2: that is, 0 and 1. We, as humans, work in base 10: that is 0,1,2,3,4,5,6,7,8,9.

An ethernet cable. RJ45 is the style of the connector.

There are a lot of applications that can be installed in order to program.

It depends on your knowledge and training ability.

Some of the most famous programming languages are:

- C++

- VB\C#.NET

- C

- Delphi

- ...

This error is being displayed because Nero cannot adjust the power of the Burn laser in your CD/DVD RW drive. the drive is possibly faulty.

Try burning the data with other software, such as Windows Media Player for audio.

I can't tell you how it has happened, but I can tell you how to change it back.

In XP

You need to go to Control Panel and

double click on Regional and Language options (switch to classic view if you can't find it), click on tab Languages

click on button Details

Now you can select the appropriate keyboard layout

save and close

this is boogers

In simple words, MS Outlook and Lotus Notes both are highly popular email client applications among all others. MS Outlook is hosted by Microsoft and it stores information in PST or Personal Storage Table files. On The other hand, Lotus Notes is hosted by IBM Lotus Domino and it uses NSF files to store information.