answersLogoWhite

0

Mercury Grand Marquis

The Mercury Grand Marquis is a full-size sedan marketed by the Ford Motor Company from 1983 to 2011. It features a V8 engine, rear-wheel drive and six-passenger bench seating.

2,542 Questions

How do you keep my high mileage mile 4.6 lter grand marquis going?

I have 204k on mine and she's fine. Just do regular oil changes and take care of her. I suggest K&N filters too. Especially the replacement air filter it really gives you a power gain. Replace your spark plugs also and you should be golden

Does the 1996 mercury grand marquis have traction control?

According to the 1996 Mercury Grand Marquis Owner Guide , Traction Assist

was an option

As of January 18 , 2012 you can still view the 1996 Mercury Grand Marquis

owners manual online at :

www . motorcraft service . com ( no spaces )

Click on Owner Guides

What is firing order in coil pack mustang 3.8l?

check " Helpfull " contributor answers - question has already been answered Feb 15 / 09

What is a tank filler neck?

The fuel tank filler neck is the metal pipe attached to the rear fender that you insert the gas nozzle into to fill your tank.

What kind of oil does a 1993 mercury grand marquis take?

I would asume it came from the factory with ( 5W-30 ) like my 1991 Ford

Mustang 5.0 liter V8 engine did

How do we get a stuck driver's window up on a Grand Marquis.?

I HAVE HAD THE SAME PROBLEM..SOME TIMES U CAN HIT THE MOTOR WHILE U TRY TO HIT THE BUTTON TO MAKE IT ROLL UP AND SOME TIMES U HAVE TO WAIT AND JUST HIT THE BUTTON AND ONE LUCKY DAY IT WILL ROLL UP OR U CAN GET A NEW WINDOW MOTOR

How do you replace the window motor on a 1984 grand marquis?

Quite easily, IMO. I replaced two.

It's been about 10 years ago, but...if I remember correctly...Take the cover off of the arm rest (where the window controls are)...you'll see the entire piece, sitting in a pocket. I believe it's screwed in...unscrew it...lift it out...unplug the wires from it & replace it with a new one...in reverse order.

Hope that helps.

What would be wrong if when you shut off the engine of your 1992 Grand Marquis and your windows and windshield wipers still work What could this be?

Can you still turn the radio on and other accessories? If so then I would say that the ignition switch is bad. It is not properly stopping the current anymore. Hope this helps.

Where is the fuel tank on 2001 grand marquis?

On a 2001 Mercury Grand Marquis :

The fuel tank is mounted vertically behind the rear seat

Why don't the windshield wipers in a 1985 Mercury Grand Marquis turn off?

Windshield wiper motors have an internal switch that allows a wiper motor to stay running long enough to keep the wipers moving until they reach the "park" position. Once the wiper gets to the park position, the wiper motor is shut off. The internal switch often fails and either the motor will shut off immediately, wherever it is or it will keep running. It sure seems that you need a new wiper motor.

Can 22 fit on 2001 grand marquis?

Can 265 35 22 inch tires fit on a 2001 grand marquis

Where is a 2001 Mercury Grand Marquis Fuse Diagram?

check fuse panel door on the inside ,if not there check owners manual. fuse box diagrams

http://www.autozone.com/az/cds/en_us/0900823d/80/19/31/35/0900823d80193135/repairInfoPages.htm

How do you loosen the tension on the pulleys on a 1993 Mercury Grand Marquis?

Should be self-adjusting unless tensioner is bad

get a tensionier bar from the auto store. Place it the hole or around the nut moves the tensioner, either up or down.

Would someone help please there is a hole in a hose that is attached to your gas tank its not leaking any gas out but there is a strong odor of gas fumes Does anyone know what that hose is called?

There are usually no more than 3 hoses coming from the tank: # The fill hose connects the fill neck to the tank # The vapor recovery line. This comes off the highest point of the tank and takes fumes to the charcoal cannister. # The fuel line. This, on a car that doesn't have an in-tank fuel pump, is not under pressure but will continue to siphon fuel from the tank if it leaks. If you are only smelling fumes and not seeing leakage, it is reasonable to guess that it is your vapor return line.

How do you change a head light on a 1996 grand marquis?

I have a '97 grand marquis and have changed the headlight bulbs. (This is not the same as changing the lens assembly.) Simply open the hood and look at the plastic cover just inside the front of the hood opening above each headlight. There is a small plastic cover over each one that pops out easily, allowing access to the bulb sockets. Turn the socket a little less than 1/4 turn counter clockwise, and remove it from the headlight assembly. Pull out the old bulb and replace it with a new bulb. Put the socket back into the assembly and turn it clockwise to lock it back into place. Put the plastic cover back and close the hood.

Where is Turn Lights Relay located on Mercury Villager?

The electronic turn light flasher locates below the interior fuse block (Near to the hood release handle). Nhan Trinh of Lewisville, TX.

Is the fan clutch is bad on my 1997 Mercury Grand Marquis if it doesn't spin all the time?

If the clutch is bad, you would be able to hold the fan and start the car. The fan will not spin if the clutch is bad. If the clutch is good the fan spins at a high speed.

What is the best gas to use in 2005 mercury marquis?

For a 2005 Mercury Grand Marquis :

" regular " unleaded , 87 octane

According to the Owner Guide

How do you change the starter on a 1998 Mercury Grand Marquis?

Simply unbolt the old one and bolt the new one on, there is no trick to it.

Where can you find the 2008 Mercury Marquis keyless entry code?

The Marquis does not have a standard code. A dealer may be able to supply the factory code for the exact car, unless the code was owner changed.

How do you change brakes on a 2000 Grand Marquis?

Remove wheels Re-install 2 lug nuts to hold rotor in place Loosen 2 caliper mounting bolts Remove one of them to allow caliper to swing off the rotor Remove outer brake pad Use "C" Clamp and inner pad to retract piston into caliper body--(Front only) Rear is threaded and special tool is needed (Not expensive available at Sears or auto part store) Replace inner and outer pads Re-install caliper and mounting bolts

PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE