How many gallons does the gas tank in the 2012 Mitsubishi Lancer-Sportback hold?
The gas tank on the 2012 Mitsubishi Lancer-Sportback holds 15.5 gal..
What type of oil does a 1991 Geo Metro need?
Whatever brand you prefer. Just make sure it's a good brand 5w-30 weight. Here is more input: * 5W30 oil in your choice of brands will work just fine. * Regular 5w30 in cold climate. Use synthetic oil. Works wonders. * 10w40 or 10w30, Chilton book warns against using synthetic oil saying it causes leakage in the motor. It recommends 10w30 as an all around oil.
What kind of transmission does the 2009 Mitsubishi Lancer have?
The 2009 Mitsubishi Lancer has a 5-speed manual.
Location for the sepentine belt tensioner on 2003 Lancer ES?
For the 2004 ES Lancer it is just below the PS and above the airconditioning units on the front of the car, right side of the engine.
How do you program a remote in a Mitsubishi Magna?
Reprogramming Remotes (from martybugs.net - this works I have done it)
Note that your local Mitsubishi dealer can reprogram remotes, but they will charge you. Rather than paying your Mitsubishi dealer, you can easily reprogram the remotes yourself in a few minutes.
You'll need to have all the remotes for the car when programming, because once you place the car into program mode, it will forget all previous remotes.
# To place the car into program mode, turn the ignition between ACC and IGN three times within a 5 seconds period, and then leave at the IGN position.
# The hazard lamps will flash once to indicate the car is now in program mode.
# Within 5 seconds of this acknowledgment, press any button on the first remote.
# The hazard lamps will flash once to indicate acceptance.
# Within 5 seconds press any button on the next remote to be taught. This process may be repeated for up to four keys.
# Program mode will be terminated by any of the following events:
#* The ignition is turned off. #* More than 5 seconds have elapsed since the last valid key code. #* Four keys have been taught to the BEM. #* No correct data has been received in 10 seconds.
How do you locate the speed sensor wire on a 2003 Mitsubishi Lancer?
The Wire your looking for can be found behind the instrument cluster. It is the white/black wire in the white plug on the back of the cluster. .
How do you change the engine belt of a Mitsubishi Lancer 1994?
I have the 1.8 version and have changed the timing belt a few times. There is no shortcuts, you need to remove the alternater and power steering pump belts first, then the crankshaft bolt on the bottom pulley and remove the pulley. All this just to get the plastice belt guard off. The belt guard is in two pieces, you can remove the upper half to access the condition of the belt only.
What type of oil does a 2008 Mitsubishi Lancer use?
According to the manual, they recommend SAE 5W-20. Pennzoil's Lube Match says Mitsubishi recommends 5W30.
Always check your owner's manual or the sticker on the inside of your hood to be sure of the recommended oil type for your particular engine. Using the wrong oil could cause engine damage.
How many gallons does the gas tank in the 2006 Mitsubishi Lancer-Evolution hold?
The gas tank on the 2006 Mitsubishi Lancer-Evolution holds 14.0 gal..
What is the cam type of the 2009 Mitsubishi Lancer?
The 2009 Mitsubishi Lancer has double overhead cam (DOHC).
What causes a 2002 Mitsubishi lancer to misfire?
Last summer, the cylindars started to misfire on my 2002 lancer. Once the spark plugs were changed, I haven't had any more issues.
2003 Mitsubishi Lancer heater control temperature dial?
asking how to change it? guess yours snapped off too. all i did was disconnect the cable at the actuator and now i turn it like that its near the gas pedal big white thing with a partial wheel with teeth on it
What type of oil does a 1995 Mitsubishi Lancer use?
0W30 and 5W30 can be used all-season in the 1995 Mitsubishi Lancer. The 30 weights can be used in the gasoline and non-turbocharged engines. Turbo and diesel cars will require weights as specified in the user manual.
Where is the intake air temperature sensor located in a 2004 ralliart lancer?
Between the Airbox (where your filter is), and where it enters the engine.
Where is the air conditioning drain hose for a 2004 Mitsubishi Endeavor?
OK after searching and searching for the ac drain hose on a 2004 endeavor. I found it. it is located on the drivers side right next to the transmission hump. fallow the brake lines up the fire wall there is a brace with a whole in it. I had to use a mirror but looked right in with it and there it was. there is a black hose running right thru the firewall. just fallow the brake lines up the firewall until you hit the brace feel for the whole and the hose is right there.-steve-
Where is the fuel pump on a 2004 Mitubishi lancer?
Fuel pump and fuel filter are together as one assembly in the fuel tank. Gaining acess requires removal of the back seat.
Why the 2002 lancer dome light and radio does not work?
Just fixed mine today. The dom light fuse in the engine fuse compartment was blown. The radio/power locks will go out as well if this fuse blows.
How do you replace a tail light bulb on a Mitsubishi lancer?
peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
How much torque does the engine in the 2005 Mitsubishi Lancer have?
The 2005 Mitsubishi Lancer's engine produces 130 ft-lbs. @ 4250 rpm.
Where is the fuse box on a 2005 Mitsubishi Galant?
Under the hood on the passenger side, there are two. One is long and narrow, those are your engine fuses and relays. The other is more boxy and contains all the fuses you might expect to find on an in car fuse box. Be careful thought, this box also contains your cars primary computer or ECU, avoid banging around or touching it too much.
What type of oil does a Mitsubishi Lancer use?
See the list of Related Questions below for direct links to model years of Mitsubishi Lancers, where you will be able to find information about the oil type that is recommended for engines used in that year. Oil is measured in viscosity, meaning the thickness of the liquid. Using a viscosity that is not recommended for your engine may cause damage.
THE ONLY WAY TO BE 100% CERTAIN YOU ARE USING THE ENGINE OIL RECOMMENDED BY MITSUBISHI IS TO REFER TO YOUR VEHICLE'S OWNER'S MANUAL OR, IF EQUIPPED, THE REFERENCE STICKER ON THE UNDERSIDE OF THE HOOD.
How do you fix a 1990 Mitsubishi Lancer indicators when they flash quickly but all the lights work?
it means that one of the indicator blubs have blu which causes them to flash quickly