0
Chrysler 300 Series
The 300 “letter series” are high-performance cars manufactured in the US by Chrysler Corporation from 1955 to 1965. The cars are available as a two-door coupe and a two-door convertible.
1,224 Questions
Where is the camshaft sensor for a 2005 Chrysler 300 3.5 location?
The camshaft sensor for a 2005 Chrysler 300 with a 3.5L engine is located on the front of the engine, near the cylinder head on the driver's side. It is typically positioned near the timing cover, making it accessible for replacement. You may need to remove some components or covers to reach it easily. Always consult the vehicle's service manual for specific instructions and safety precautions.
Will 17in corvette wheels fit a 2005 Chrysler 300?
17-inch Corvette wheels will likely not fit a 2005 Chrysler 300 due to differences in bolt patterns, offset, and center bore specifications. Corvette wheels typically have a different lug nut configuration and spacing compared to the Chrysler 300. To ensure compatibility, it's essential to check the specific measurements of both the wheels and the vehicle's hub. Adapters may be available, but they can affect handling and safety.
How do you install timing chain tensioner on a 2003 Chrysler 300 m?
To install the timing chain tensioner on a 2003 Chrysler 300M, first ensure the engine is at top dead center (TDC) on the compression stroke. Remove any components obstructing access to the timing chain cover. Install the new tensioner in its designated location, ensuring it aligns correctly with the timing chain, and then torque it to the manufacturer's specifications. Finally, reassemble any removed components and check for proper operation before starting the engine.
Can you flat tow 2013 Chrysler 300 awd?
Flat towing a 2013 Chrysler 300 AWD is not recommended by the manufacturer. The vehicle's all-wheel-drive system can be damaged if towed without proper precautions, as it may not allow the transmission to operate correctly while being towed. If flat towing is necessary, it's essential to consult the owner's manual or a dealership for specific guidelines and potential modifications. Generally, using a tow dolly or trailer is the safer option for transporting this vehicle.
What is the fuse number fro the radio on a Chrysler 300m?
10 amp. Do not up size or downsize it, it will cause many problems. If it keeps blowing ask for a mini-circuit breaker that fits into the fuse holder. Any auto parts store will have one.
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
Why does a 2007 Chrysler 300 hesitate to start when you turn the key It is taking longer each time?
Replace the fuel filter if it is replaceable. You may also have a weak fuel pump.
What does it mean when bank one and bank two says car running to lean Chrysler 300 2005?
I don't know what this question is asking. Are you talking about a lien. What are you trying to do that the two different banks are indicating this?
Where is the ETC on your 2005 Chrysler 300C?
The ETC is electronic throttle control. It includes the throttle body, on the intake. The engine computer, under the cowl passenger side, and numerous sensors.
Where is the location of starter for 1999 Chrysler 300m?
The starter is located under the motor on the drivers side...if you're looking at it from under the car (which is where you'll need to be) it will be to the right and back of the catalytic converter. There are two silver pipes that run right by it...
Can you use the ac recharge kit sold at Walmart to recharge a 2003 Chrysler 300M air conditioner?
yes you are better off getting the starter can with the reusable hose and gauge if this is your first time refilling yourself
2001 300m radio installation instructions?
Turn off vehicle and accessory.
with flat head screwdriver - pry radio/air conditioning control bezel from dash. it just pops out and pops back in at 6 points 2 above a/c control, 1 on each side of radio, 1 on each side of CD changer/ storage pocket.
disconnect wire harness from air conditioner control.
remove the 4 Philips screws from the OEM tape player
disconnect wire harnesses (large wire harness goes to factory amp, small one wire harness controls dimming of factory disc changer, small round harness controls factory disc changer (if you have one).
disconnect large copper ground cable from back of OEM unit.
You will need - aftermarket radio mounting kit - available at wal-mart, eBay, best buy, etc... aftermarket radio wire harness, and of course a good supply of electric tape and wire cutters/strippers. Try not to use wire nuts as they can come off and short out your speakers or radio.
Follow instructions with aftermarket components for wiring harness and new CD player mounting kit instructions. Be sure to attach black ground wire to large copper cable - make sure it is a solid connection.
When all wires are connected, turn ignition key to accessory and test unit - if it works correctly, turn accessory back off. Mount new unit with new mounting kit and 4 Philips screws. reattach the a/c wire harness to the control and pop the bezel back in place - starting with the top - you will have to slide it up and then push in.
Where is the release for the fuel tank door on an 87 Fiero?
It is behind the drivers head back wall by door opening
Where is Chrysler 300m alternator located?
On the 3.5L V6 engine, open the hood of your car. Locate your drive belt which goes around your alternator. You can see the belt in the space between you radiator and your engine. The alternator is on the top right(driver side).
