0
Dodge Intrepid
In this category you can ask questions about Dodge Intrepids. These questions can include where to find parts, how to get help, or how to do it yourself.
1,915 Questions
How do you convert power windows to manual windows?
go to a "boneyard" (junk yard) ask for the manual window hardware for the same make, year, and model of car, including the "armrest" window control replacement... then "rip out" the old electric window stuff and replace it with the manual parts....
you can also possible order new parts from the auto manufacturer ...
other than that, I'm not sure a conversion exists .. without alot of custom made hardware involved... which would probably cost alot of money
but for a model car that's 5 years old or more, i would consider my method of replacement..
you may be able to "RESELL" the electic parts to re-coup your cost of the manual parts.. possibly a "break-even" situation... so "rip-out" your old electric parts very carefully...
maybe a body shop would do the thing for you for a reasonable cost
Clearance specs for a crankshaft sensor on a 1992 grand voyager 3.3l v6 engine?
There is a little spacer that the dealer sells that is glued to the end of the crank sensor before instillation. That is the gap setting.
How do you adjust the idle on a Dodge Intrepid?
The idle on most computer-controlled fuel-injected vehicles is not adjustable, per se. The computer controls the idle speed. There are probably other issues. If the vehicle starts and runs, it's not the crank sensor, which has no control of idle speed.
What are the symptoms of a bad camshaft position sensor in a 1998 Dodge Intrepid?
The Check Engine Light should be on if the sensor is faulty. The car may or may not hesitate, stall, or accelerate poorly.
To read the engine error codes, cycle the ignition key from "off" to "on" three times:
Turn the iginition key to the "on" position where the check engine light comes on but do not start the car. Turn the ignition key to off, then on, off, and on again and leave the key there. The odometer will read out any error codes. P0340 and P0344 are trouble codes for the camshaft position sensor.
Where is the PCV valve on a 2000 Dodge Intrepid?
For the 3.5L Engine it is on the top rear part of the engine facing towered the cabin. You will see the thick black hose coming out of it.
In most 90's and up Dodge/Chrysler vehicles, you can try to pull codes from the car's computer as long as you still have a charged battery. Put your key in the ignition, and turn it forward, but not far enough to engage the starter. Turn the key back to the Off position, then forward, back and forward again. In early 90s vehicles, the Check Engine light is going to flash a number of times. Often, code 55 means it is completed. In mid and late 90s vehicles, you will often get a 4 digit code that may help you diagnose problems starting, mostly checking the eletrical, ignition and sensor systems.
2002 Dodge Intrepid with a code P1794 replaced both speed sensors the code still comes up Why?
One of the pig tail for the speed sensor has a crack in it and/or not grounded
How do you remove the rear brake drum on the 1996 Dodge Intrepid V6 3.3?
Purchase a repair manual at any auto parts store that is specific to your ride. Around $12, and will contain all the info you need for this and future repairs.
How do you release the tension on 98 Dodge Intrepid 2.7 power steering alternator belt?
I haven't done that particular model but all the rest have pretty much been the same. It should have a tensioner with a pulley on it bolted to the engine. The tensioner will have a square hole in it for a ratchet or breakover bar to fit in it. Some are 1/2" and some are 3/8". When you place the ratchet in the square hole and pull it, it will collapse the spring letting the tension release from the belt. Slip the belt off the pulley and ease the ratchet off.
Dodge P1687 is -P1687-No Cluster Bus Message More than likely a faulty PCM.but will need further diagnosis using a flow chart for this code.
What does code p0405 means on a 2000 dodge intrepid?
Trouble code P0405 means:Exhaust gas recirculation sensor A circuit low
Why is the airbag light on in a Dodge Intrepid?
The airbag computer has detected a malfunction and set a code.
How do you replace power steering pump on a 1999 intrepid?
The power steering pump is located on the drivers side under the alternator. There is 3 bolts that can be reached thru the pully, as well as the hose coming from the resovior and the pressure line, which I think is 18mm. Now this is for a 3.2 setup. For the 2.7 the pump has the resovior has on it, there is a bit more work as you may need to take off a plate before you can get at the bolts.
How do you replace the timing belt on a 2000 Kia Sephia?
1. http://kia.com/index.php
2. (lower left side) hover "Kia Owners" >> click "Service Information"
3. Create Login (worth it!!!!!!!)
4. Technical Information
This is a HUGE online repair manual. I was very impressed, overlooking some translation errors.
How do you change a valve cover gasket on a 1997 Dodge Intrepid?
Take the valve cover off. Remove the old gasket. Put new gasket on. Replace valve cover. complete directions at this site http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/18/20/c1/0900823d801820c1.jsp
Where is the PCM Power Control Module located on a 2004 Dodge Intrepid?
The 2004 Dodge Intrepid PCM power control module can be found on the firewall in the engine compartment. The PCM power control module will be on the passenger side of the firewall.
What size gas tank does a 98 Dodge Intrepid?
The 1999 Intrepid 2.7 litre has a 16 gallon fuel tank. I would guess the 1998 is the same..
There is no need or any way to "time" a 2.7L with a timing light.
How many miles can you get on a Dodge Intrepid before it dies?
My 2002 Dodge Intrepid SE has had a few annoying issues over the years, but surprisingly I've beaten the odds and it's still running pretty well at 130,000 miles
