Iron replaced bronze in the making of weapons and tools. Iron weapons were stronger and more durable than bronze, leading to the Iron Age. This shift occurred around 1200 BCE.
To check the hydraulic pressure of the convertible top on a 93 Cutlass Supreme, you will need a hydraulic pressure gauge. Connect the gauge to the hydraulic line and measure the pressure when operating the top. To increase the pressure or refill the fluid, locate the hydraulic pump and reservoir, and add the appropriate hydraulic fluid recommended by the manufacturer until the pressure reaches the desired level. It is important to follow the manufacturer's guidelines for the correct type of fluid to use.
that's an A-body so it should interchange with a chevelle, GTO or tempest, or a buick regal of 67.
There is a sticker on the inside of the trunk lid that has that information.
Yes, but the signal lights are the wrong shape.
Between 15 and 19 MPG.
I had an '86 with 307 4bbl....still computer controlled. Running a TH350 and 2:29 gears it averaged 26 MPG at 70-75 from Flagstaff, AZ to St. Louis, MO. Depends on state of engine, gears, tranny, how you drive it, etc.
That depends. '71 W30's were made at Lansing MI, so the VIN must have the M.
The VIN must be 344... or it's not a factory 442... HOWEVER, and beware here,
the BODY TAG, which is NOT the VIN... can be for a Cutlass body [336...] at least for the '68-9 Lansing built cars.
*THE* VIN is the dashboard sequence like
344671M001442
and all '68 thru '71 442's [and ONLY 442's] sport the "44" model series identifying digits.
Sign up for free at wildaboutcars.com and learn all about almost any year's VIN and models.
OLDSMOBILECUTLASS SUPREME (FWD)1988-97Metric: 5 X 115
Standard: 5 X 4.5216 X 6 12 X 1.5 70.3
take the brake line out of it and there are 2 bolts on the back of the wheel cylinder that come out and it's off.
Swivel sockets and a 2 foot extension usually works.