0
Chevy Corvette
Launched in 1953, Chevy Corvette is a sports car manufactured by General Motor’s Chevrolet division. Harley Earl designed its first model, a convertible. It is Commonwealth of Kentucky’s official sports car.
4,587 Questions
How do you turn on the high beams on a 1973 corvette?
There is a foot switch on the driver's floor by your left foot.
How to install motor mounts for 1976 corvette 350 stock?
One way to do it is with an engine hoist. Loosen and remove the through bolts in the motor mounts. Carefully raise the engine with the hoist until you have enough clearance to unbolt and remove the engine mounts. You must be careful and work slowly when raising the eingine, though.
Where is the horn relay located on a 1993 Chevrolet Cavalier Z24?
under the hood in a fuse box. probably on left inner fender.
How do you replace the fog light bulbs on a 2002 Sentra SE-R Spec V?
I just replaced the fog lamps on a 2001 Sentra 2.0 SE w/performance package, I'm assuming the fog lamps are the same. From underneath each lamp assembly, behind the bumper, you will see a screw that faces downward (ignore the one that faces in). Remove the screw. At the top of of the assembly you'll see two metal posts poking through white nylon fittings. Use the end of a long flat-head screwdriver and some leverage to push the metal post toward the front of the car, through the fitting. Once they're part of the way through you'll be able to push the entire assembly out through the front of the fascia.
Once you've got the assembly out, twist the round collar counter-clockwise and pull it apart from the lamp. Pull the white electrical connector out of its slot and then remove the wire that comes from the bulb. Then remove the small screw that holds the black wire from the collar to the lamp. Once out, the copper clip that holds the bulb in place will be loose and can be removed. Take note of its position, as replacing it is the most difficult part of the procedure. At this point you can remove the old bulb and replace it with the new one. DO NOT TOUCH THE NEW BULB WITH YOUR FINGERS! USE GLOVES! Once the bulb is in place, put the copper clip back in place, noting that you should put the small flat piece under the flange where the collar wire will screw back in first. Once you replace the collar wire and the small screw the flange will hold the clip in place and you can snap the longer end back around the retainer, which makes it apply equal pressure on both sides of the bulb and hold it in place. I recommend taking both assemblies out of the fascia first and using one as a visual guide for the correct assembly of the other, to avoid confusion. Once the screw is back in, place the collar back onto the back of the lamp and turn clockwise to re-attach it. Make sure the bulb wire was plugged into the white connector first, and that the connector was put back into its slot in the collar.
Then you just put the assembly back into the fascia, pushing the two metal things through the white nylon tabs. Replace the screw and tighten, and you're all done.
How do you get the antenna to go up on a 1997 Bonneville?
Assuming it is functioning, turn the radio on.
How can you increase HP in an 1986 Corvette without getting into the engine?
You can get a performance chip for the computer, and also modify your exhaust
What causes the 4 speed auto trans in your 1989 Corvette from shifting up past 2nd?
im guessing you have a 700r4 its is time to get a rebuild but for your answer it could be a valve body problem or possibly the 3rd and 4th clutches and sprags are bad
Where is the fuse box for headlights located for a 1989 Corvette?
The fuse panel is located on the passenger side end of the dash board. Open your passenger door all the way, and you'll see a small door with a self-kept plastic latch. Open the door and you'll find the fuse block.
Why would the air conditioning work fine but not the heat 1994 corvette?
The heater core is blocked. The heater core works of circulation of the radiator fluid, while the A/C works off ciruclation of the freon.
You have tripped your anti theft, Mine did the same thing Try un hooking your battery for 2-3 min DO NOT LOCK THE DOOR! and it should start.
How much horsepower 1968 corvette 327 block 3892657?
300HP with the base L75 327ci V8 and 350HP with the optional L79 327ci V8 (these are gross horsepower ratings because they didn't switch to net horsepower ratings until 1972).
How do you replace a 1996 Corvette battery?
You unplug the battery and then pull it out then put the new one in and plug it up.
WRONG!
It is a two hour process, requiring multiple size and styles of wrench (i.e. three sizes of metric and Torx) - it is described elsewhere on the net. You have to remove the side cover plate that extends from the front of the door to the wheel well.
Can you buy a Corvette from assembly line?
Yes, it is called a museum delivery. it is an option you order through the dealership. when your car is ready to be assembled you go to the plant in bowling green, ky and pick it up right after it is made. you also get a tour of the plant and may even see your car being built. I believe Corvette is the only on to offer this option in America. It costs around 1000 extra. Also travel expenses to the factory are your responsibility.
What is the firing order for 74 corvette 350?
All V8 Chevrolet's are 1,8,4,3,6,5,7,2 with 1,3,5,7 on the left bank and 2,4,6,8 on the right with the distributor rotating clockwise.
Your turn signal on your 1976 corvette will not work when head lights are up what is wrong with it?
Your turn signal may not be working because your spark plug may have blown out or there is an electrical short. A licensed mechanic would be able to test these for you.
How many miles can a Corvette go?
The corvette can go a whole lot of miles. As many at you want!
My 72 was my daily driver and only transportation back in the day. When I sold it in 1985, it had over 182,000 miles on it and engine, clutch, trans, rear axle, starter, alternator and basically everything in the drivetrain except the brakes and wheel bearings was factory original. Went all over in that car including 2 road trips over 3,000 miles and it never let me down even once. Was a base engine coupe, war bonnet yellow with 4-spd and a/c. Great car.
Where is the power antenna relay located for a 1982 corvette?
Behind the passenger seat in the storage compartment is a tray. Lift the tray and you'll see the jack. Forward in that space is the relay.
What could be the causes of a 1965 Corvette 327 engine that will not spark?
There are a few things that can cause this problem. The spark plugs could be bad, the distributor cap could be off, the spark plug cables or boots could be damaged.Ê
Change tail light on 1985 Corvette?
On the inboard lights, take off the licence plate and stick your arm, if it is small enough, up and to the port or starboard side. rotate the housing counter clockwise, pull it out, and remove and replace the light. On the outboard lights, stick your arm up between the muffler and the rear quarter panel on either side and use the same procedure as on the inboard lights. This is the proper way, but after breaking one out board light, mashing the rest of the bulb, and blowing a fuse, I let my mechanic do it. He also has smaller arms and can get in easier.
How do you turn off th factory alarm on a 1976 corvette?
stick the key in the driver front fender and turn.
How do you repair a 1982 corvette power antenna if the motor keeps running?
Most likely it will have to be replaced. If you just want to leave it up for now just unplug it. Flip up the driver seat and run your hand along the top of the carpet at the back window. Pull the carpet down enough to get your hand under the edge and feel back probably about a foot. There will be a plug. Just unplug it and push the carpet back in place. Then you can replace it when you want. I have a 1982 I bought new that's still in my garage, I have learned alot of little things over the years about this particular car. Good luck and hope you love this car.
