Why is every video converter failing to convert avi videos to mp4 in Windows 7?
Try using Handbrake or Freemake video converter:
http://handbrake.fr/
http://www.freemake.com/free_video_converter/
There could be a problem with a certain .avi file you're trying to convert.
How can you get dial up internet on another computer you all ready have it on 1 computer?
I didn't quite follow you. What do you mean, do you mean (1) use the same dial-up cable to connect another computer or (2) you want to use one dial-up cable to connect both computer.
1. If you want to do this, that's easy, just unplug your cable and connect with it with your new computer, then go to Control Panel->Network and Internet Connections->Network Setup Wizard.
2. That will be a little complicated.
Option A: Get a router, follow the direction of the manual.
Option B: you can run many pcs of 1 router that has wireless in it
1 router with wireless acess in it set that up on frist PC by ethernet cabel . then enter route settings an set up wireless network id with security key for ur other PC newwork id can be anythingthing with numbers . then when that is done go to the other PC you can use a . wireless usb adapter for that install the network drivers for the usb adapter half way in to .da install it will ask you to connect .da wireless usb adapter do that and thewn that is installed then hit on the weirelss usb adapter icon in the taskbar by ur PC time put in ur network id with secirty key . that u ser up on router . then hit Apply & ok .then that PC is online
Option C: Use the newer computer to connect to the internet. Next connect the two PCs together with a "Crossover cable". Make sure it is not a "Patch Cable". Use the "Internet Connection Wizard"* On the second computer. Select when prompted to connecet to the internet throught another computer.
Setup procedures
To enable Internet Connection Sharing on a network connection, follow theses steps:
1.
Click Start, click Control Panel, and then double-click Network Connections.
2.
Click the local area network (LAN) connection or click the dial-up networking connection that you want to share (that is, the one that connects to the Internet), and then under Network Tasks, click Change settings of this connection.
3.
On the Advanced tab, click to select the Allow other network users to connect through this computer's Internet connection check box.
4.
If this is a dial-up networking connection, and you want the connection to be automatically dialed when another computer on your network tries to connect to the Internet, click to select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet
check box.
5.
If you want to permit other network users to enable or to disable the shared Internet connection, click to select the Allow other network users to control or disable the shared Internet connection check box.
6.
Under Internet Connection Sharing in Home networking connection, select the connection that connects the computer that is sharing its Internet connection to the other computers on your network.
Note that to enable Internet Connection Sharing in Windows XP, you must have administrative rights.
Important When you enable Internet Connection Sharing, the network adapter that is connected to the home network or to the small-office network receives a new static IP address of 192.168.0.1, with a subnet mask of 255.255.255.0. Existing TCP/IP connections on the network may be lost and must be reestablished.
What is the Email address of Kumar Sanu?
Kumar Sanu d'not know to use Computers/Internet/email. Therefore there is no question of he having any email ID I am actually an amateur song-lyricist. I try to write literary lyrics which aim to make us tink and enjoy simultaneously. I want to send some of my lyrics to Mr. Sanu to know his expert opinion. moni chowdhury mail address: engmoni@yahoo.co.in
Yes in sindh,"shah abdul latif university khairpur
What is the language of the command prompt called?
"powershell" on windows and "bash" on linux. I'm pretty sure mac uses bash too
What is an Event Handler in Macromedia Director?
An event handler contains lingo or javascript code which is executed when a particular event fires. An event handler always begins with "on" followed by the event name, and terminates with a sigle "end" (optionnaly followed by the event name).
Here's an example : Intercept a mouse click on a sprite, and display a message box :
on mouseUp
alert("Hello world")
end
Animations or parents scripts can contain handlers subjected to be called from anywhere in a projection.
Behaviors scripts contain only handlers concerning events fired to a particular sprite (in the example above, the handler should be located in a behavior script attached to the clicked sprite.
What is advantage of blue eyes technology of computer?
Many - http://www.articlesbase.com/networks-articles/blue-eyes-monitoring-human-operator-system-420263.html
Who was the winner of Total drama Island sezon 2?
Sorry no one knows until it comes out in summer 2009
How can you check your 1994 Q45 computer system?
Depends on which computer system you're looking to check. One reason for the cost of the Q45 is the complexity and sophistication of it's on-board computers. In 1996, the Q45 was converted to OBDII (today's general standard for automotive diagnostics). The model years before that will require a Nissan CONSULT, or the Nissan DataScan and cable to interface with the car and allow you to perform PB tests and monitor the vehicle's performance and possible codes. More info can be found at Q45.org and the NICO Q45 Forums.
What does the word 'computer' mean?
The act of calculating with figures is to compute. A person who did these calculations was referred to as a computer. Since the original function of the machines was to perform mathematical computations, the machine took the place of the person and became known as the computer. While the machine is capable of so much more than plain mathematical sums, the root capability is still dependant upon the ability to do these calculations. Look up the word "compute". A "computer" is something CALLED MILLWALL its a machine which helps the owner in the following manner 1.)to connect internet 2.)to help in calculating various sum's 3.)to solve various problemo like create data
Do icons on your desktop slow your computer down?
They slow it a bit as they use some of its virtual memory.
I doubt it very much, but will be interested to see the correct answer to this.
Yes they do slow down your computer. Particularly if you store big files on your desktop. Many people have like 40+ shortcut icons. One shortcut is roughly 25Kba big multiply that by how many icons you have and there you are. The solution is:
Remove all the big files from your desktop. If your hard disk is full get some external usb hard disk and move all your movies and pictures there. Then update you antivirus and antispyware and run a full scan. After that a defragmentation is a good idea. If the problems still persist then you should use a decent registry cleaner. If you are not sure which one to use maybe you could do what I did. Visit the http://thebestofregistrycleaners.com
Is a common anode better then a common cathode?
Neither one is "better" than the other, it simply means the circuit will have a different layout/components if you choose one over the other.
ROM
ROM is an acronym for Read Only Memory. The advantage of ROM is that its contents do not evaporate when the power is switched off. Therefore the program which needs to execute when the computer is first switched on is stored in a ROM chip on the computer's motherboard.
Once the program stored in the ROM chip has finished initialising the hardware, it moves the head of the hard disk to track 0, reads the first sector of track 0 into memory, and then passes control to the short program stored in the first sector of the hard disk. To simplify a bit, it is the responsibility of that program to locate the operating system files on disk, and then begin the process of loading them.
hellllllllllllllllllllllllllllo
It is a shape of your choice ,one easy enough for you to quickly manifest in your minds eye. That you can project thought into to correlate energy or psychic energy into images or things your mind can understand or interpret . You can also channel other outside energy's coming at you through this "shape" for the same purposes..
Who created the mini computer?
A minicomputer is a computer of medium power, more than a microcomputer but less than a mainframe. This class of smaller computers were developed in the mid-1960s and a possible candidate for the first early and highly successful minicomputer was Digital Equipment Corporation's (DEC) 12-bit PDP-8 made in the US.
It will be on both of them.
Note that many game CDs have anti-piracy measures that either make it difficult to copy the disc using standard copying programs or prevent the copied disc from working.
How do computers use binary coding?
The core of computing is binary encoding. The premise is that each of the transistor switches is either on of off, represented by 1 or 0. Each bit is a BInary digiT.
Each of these switches is more-or-less useless on its own. However, you can arrange them in a sequence to get some logic.
Humans use hexadecimal representation as a form of shorthand for binary. That's a 16-base number system that goes from 0-9 then a-f, then rolls over from 0f to 10.
When you write a computer program, the compiler converts your code into opcode, a hex representation of the binary stream. The CPU interprets the opcodes and follows the program, manipulating bits in the accumulator section. In other words, it reads the binary code and uses that code to switch bits on and off in its "brain". The outgoing data is then sent to various locations in the computer, such as to the sound card, video card, hard disk, RAM, etc. You can do this by mapping each location to a virtual location in the computer. For example, you could set the address 0x2000 to be the sound card, and when you write the data 0x5e41 to 0x2000, the sound card will interpret that data and put out an analog signal to the speakers. You could also read the data at location 0x3000 to see what's on that location in the hard drive. (for example)
The exact details require several years of study. The CPU does not "interpret opcodes" binary codes of 0's and 1's is just a DISPLAY for humans that tells them what is on and what is off for a particular instruction, transistors being switched on and off determine what happens inside a computer.
Windows NT
How long to drive to reset computer?
how far do i drive my mercury la sable ls to reset emmission control computer
What jack does a shotgun mic use to connect to a camcorder?
The one marked "Mic." You may need an adapter.