answersLogoWhite

0

GMC Envoy

The GMC Envoy is a mid-sized sports utility vehicle (SUV) from the GMC brand of General Motors. It was launched as a luxury counterpart of the GMC Jimmy in 1998. The car features a front engine and four/rear-wheel drive.

1,161 Questions

How do you replace the fan clutch on a 2002 GMC Envoy?

Consult www.trailvoy.com for a detailed "how to" on this very common problem with early model years. Basically remove fan shroud, fan, then the clutch. A special tool is available for rent or borrow (most auto parts stores) to help remove the clutch. be sur eto get the newest part number available. #25790869

In what years were the GMC Envoy produced?

The GMC Envoy was produced in 1998 and not again until 2002. The Envoy was produce until 2009. GMC is no longer producing a vehicle with the name Envoy.

Where are the spark plugs located on the Vortec 4200 gmc envoy engine?

They are along the top of the motor. You must remove the box that says Vortec 4200 on top of the motor. Under that you will see six coil packs that have the spark plugs underneath them. Carefully undo the bolts and lift them off the plugs. Remove the plugs etc.

Remember it has an aluminum head so care must be used at all times to ensure proper torque in achieved.

Plugs are designed to last 100,000 miles on these engines. If you do not have a misfire before then it is suggested to leave them alone.

www.trailvoy.com All the answers for these trucks!

Running lights not working 2002 gmc envoy?

Riunning lighs not working 2002 gmc envoy

How do you change the headlights on a 2003 GMC Envoy?

My 2002 Bravada has clips accessible after opening the hood which allow the entrire assembly to lift out - perhaps yours is similar

2005 Envoy changed pads bled lines no leaks brakes work at half pedal but pedal goes to the floor. ABS kicks in after half of pedal what is the problem?

Ensure that the wheel speed sensor/ABS sensor has been re installed properly at the wheels.

Re-bleed brakes starting from the rear and then finish with the drivers side front.

How do you program the garage door opener on a 2001 expedition?

http://www.homelink.com/home/home.tml It doesn't automatically direct you to the specific video for your truck simply follow the instructions on the homepage and choose "Programing Home Link" from the top menu Step 1, Choose a process Step 2, Choose your vehicle Step 3, Choose your garage door opener.

Will the speedometer change if you put on larger rims?

Bigger rims

Not if you do it right. If the vehicle is a Chrysler, most independent mechanics can reset tire size in the vehicle's computer to keep the transmission shift opoints and speedometer correct and on a GM, the dealer can do this for you as well.

If the vehicle is something else, just make sure the overall diameter of the tire is the same. Unfortunately, the sizes are usually a bit complicated, as they use a combination of US Standard (fractional) and Metric (SI) units in a single size. While a 31x10.5x15 tire has an overall diameter of pi*31in, a P205/75r15 has an overall size of (((205mm*0.75*2)+15in)*pi).

Depending on your tire size type, just plug in the numbers and you'lkl see what the overall diameter is. If can do 6th grade algebra, you can compute the most appropriate size tire for the new rim size to keep overall size nearly the same. Ask you kids for help if needed.

The speedometer is calibrated based on the overall tire diameter on the vehicle from the factory. If you put larger rims on with sidewalls as high as the original tires, the speedometer will not be accurate as the overall tire diameter has increased.

I've been told that you can "net out" the difference of bigger rims with thinner tires (i.e. the diameter of the tire/wheel stays the same).

If you change the diameter your speedo will NOT be accurate. Tire shops may have some idea as to how much it will be off. The best thing would be to have a mechanic recalculate your speedo.

if you get bigger tires (like i have) i have 35x12.5 tires on 15 inch rims.. but in your case if you had a 15 inch rim on 20 inch tires and bumped it up to a 20 inch tire on 18 rims, your speedo shouldn't change, and if you are having it done, they would recal. anyway..just ask the tire place.

answer

if combined wheel and tire diameter is bigger than factory specs , your speedo will be inaccurate. most tire shops have no idea or the equipment to recalibrate a good mechanic can recalibrate if your vehicle has a computer

dang, i think all he wanted to know was--- you will be going faster that what the speeddometer says

I don't know about the rest , but when i changed mine to a bigger wheel yes the speedometer did change thus i got a ticket for going TO FAST.....

taller tires always slows the speedometer. so you are actually traveling a little bit faster than the speedo indicates to you..

rim size has nothing to do with this.

tire height is where it is.

WRONG! IT IS THE OVERALL DIAMETER WHICH IS IMPORTANT. SPEEDOMETER CALIBRATION CAN BE ACCEPTABLY OK IF A LARGER RIM IS FITTED WITH A LOWER SIDEWALL HEIGHT TIRE, BUT YOU NEED TO CALCULATE BOTH TOTAL DIAMETERS. SO, RIM SIZE IS IMPORTANT TOO.

if you want to change speedometer,

you can get a odometer correction tool to change.

If you are buying larger rims, have the dealer figure the tire that will still match the tire rotation speed as the OEM tire.

I would like to add that many of the same exact vehicles have different size tires and rims from the factory.

A 1998 Dodge Caravan comes standard with 205-70-14 but the same Dodge Caravan can get custom alloy rims and they would be 215-65-16...the exact same turning speed as the 14" tires and rims.

Where is the fuse for the power window on a 1999 VW Cabrio?

the power windows fuse is fuse 14

the panel says back up lights but its also for the power windows

How many seats does a 2008 gmc envoy have?

I just test drove one today and it only have front and back seats. The envoy does not have three rows of seats. Should sit five comfortably.

Why do your 2003 envoy turns off after replaceing the car battery?

This may be one are multiple problems, First the ignition key can go bad and stop your vehicle from running, It has a built in sensor and if the key is not sending its signal the vehicle will not start it will just turn over with no start. Secondly it may be a computer ECM problem I sugest turning the key on then back off then return it to the on position for one hour this will restart your ECM. If vehicle turns over with spark then you have a possible fuel delivery problem, if you have fuel and no spark you may have a ignition fireing problem, coil packs ignition module, crank sensor etc. Check all these problems and you will be able to narrow it down.

Where is power window fuse for 91 Subaru loyal?

I am not going to swear to this but I belive it has a breaker which resets after the excessive load is no longer on the circuit.Power window fuses are not common for vehicles the breaker is the typical setup

When should you replace your oxygen sensor on a GMC Envoy?

It is only necessary when the computer recognizes a problem with it. You will have a check engine code. Mine triggered a code " low output " for about 6 months before I changed it, it was still operating ok and not affecting engine performance but the minor fault was picked up by the computer.

Where is fuse for power window on a 1998 Toyota corolla not in fuse box?

Check under the hood for a power distribution box

AnswerYou may be looking in the wrong one. There may be additional fuse panels on your car. Typically, one under the driver's side dash, and one under the hood.

Sometimes, one fuse covers a lot of circuits and may not be labeled specifically for the windows. Use a test light and test them all.

There is not a fuse. There is what is called a thermister near the motor on the power window. The thermister stops the electricity flow once it reaches a certain temperature. You need to replace the entire power window actuator. I have done it. I think the actuator cost about $70 on the internet and you can find directions on how to replace it. It is not too difficult.

What does error code P1028 on 2006 GMC Envoy mean?

the 1028 is trouble code for thermostat low temp check temp gauge for low temp replace thermostat

Why does my 2002 envoy idle up and down when you turn the heat and ac on then turns off?

you need to clean the throttle body...sounds crazy but it worked on my 04...everytime we would turn on the ac or defrost the engine would want to stall out,,,but if the floor heat was selected it would run fine....buy a can of throttle body cleaner and spay a rag with the cleaner and wipe down the butterfly on the throttle body DON"T SPRAY DIRECTLY INTO THROTTLE BODY!...MAKE IT AS CLEAN AS POSSIBLE...it'll take about 10 mins start to finish and you"ll be amazed that it worked.

Where are the fuses for the windows on a 1993 Dodge Dynasty?

right next to the turn signal and such. You have to remove the glove compartment all the way over to the ash tray that whole assembly comes out look up where the glove compartment used to be. You will see the relays use your owners manual it will point you to the flasher relay. If your turn signal is not flashing, replacing the flasher or relay might not fix it. Especially if one side flashes and the other doesn't, there is probably a short or corroded wire somewhere in the circuit. Refer to a wiring diagram to test with a test light.

What is the symbols on the dash lights mean I have a 2005 GMS Envoy and a light that looks like a video camera just came on?

Its probably the check engine light. Check your manual to make sure. If you dont have one just google it and you can find it online.

How to Set a radio sation in a 2005 envoy?

1. Turn the radio on.

2. Press BAND to select FM1, FM2, AM, or XM1

or XM2.

3. Tune in the desired station.

4. Press and hold one of the six numbered

pushbuttons until you hear a beep. Whenever that

numbered pushbutton is pressed, the station

that was set will return for that pushbutton.

5. Repeat the steps for each pushbutton.

Where is the oxygen sensor located in a 2002 dodge 1500 pick up?

Im pretty sure there are 2. One pre and one post catalytic converter. look on the exhaust pipe about a foot after it leaves the manifold and the other after the converter.