0
GMC Jimmy
Introduced in 1970, the GMC Jimmy was a full-size sport utility vehicle (SUV) manufactured by General Motors. This vehicle was based on short wheelbase trucks and was available in four-wheel drive (4WD) or rear-wheel drive (RWD) layout.
1,424 Questions
Where is the radiator drain plug on a 1997 GMC suburban?
The drain is at lower left side (drivers side) of radiator. Its a quarter turn nylon valve, hard to see and get at. A slot cut in an 18" length of approx 1/2" thin wall pipe or tubing makes it much easier to reach.
Is there a free vacuum diagram for 1998 gmc jimmy 4-wheel drive?
The availability of diagrams will depend on a few variables including the year of your vehicle and how much of the vehicle is factory original. For original equipment diagrams, check your local auto parts stores for repair books for your specific vehicle published by companies such as Chilton's or Haynes. The books will cost, but provide a plethora of information that can be used now and alter. A local library may have the books in their reference section. You may also order or download many repair manuals and individual diagrams online.
What causes ABS light to come on in a 2000 Lincoln Navigator?
Replace the speed scensor on the rear differential. It is about a $20 switch.
_______________________________________________
Check related link below for more information... _____________________________ ABS Control ValveThe valve is located on the frame rail, under the vehicle on the driver's side on the 1997-98 F-250HD F-350 and F-Super Duty. The valve is located in the brake lines, below the master cylinder.
1. Disconnect the brake lines from the valve and plug the lines.
2. Disconnect the wiring hardness at the valve.
3. Remove the 3 nuts retaining the valve to the frame rail and lift out the valve.
4. Installation is the reverse of removal. Don't overnighter the brake lines.
Bleed the brakes.
What could be the cause of an oil leak in a car?
1- loose bolts somewhere on the motor- usauay the drain bolt-
2- gasket failure from wear and heat or in some cases the installer of the part where the gasket was used unevenly tightend the bolts.
3- oil hose failure- either the hose has crack or split or the hose if connect to a metal fitting came lose
4- your motor is shot because you let your kid take it out on a Friday night and he/she decided to try out drag racing.
Suggest- power wash the engine bay of the vehical -let it dry - put a little oil into but don't over fill it- have a helper start the car and just watch the engine - alternate between the top and bottom of the car and if it starts to leek- watch out for belts and moving parts. Because a finger is a terrible thing to waste.
How do you change the rear tail light bulbs of a 1995 GMC Jimmy?
Take out the old one and put in the new!!
Where is the thermostat on a four wheel drive 4.3 1997 GMC Jimmy?
the thermostat should be located on the engine side of the top radiator hose, new rubber seal is important and no gasket sealer is needed.
i have the same exact problem with my jimmy and i believe it is the igniton switch. and if it won't let you take yoor keys out it's the little "rod celanoid" that acts as a safety and won't let you take your ke out or put it in drive from park.
Where can you get a detailed diagram of a steering column assembly of a 97 f350 tilt wheel?
Steering column are an extremely delicate part to change out in a car, and it is important to have a diagram of one. A detailed diagram of a steering column in this car can be found in its maintenance manual.
Will 31 inch tires fit a stock 2000 gmc jimmy?
Yes they will fit. I just got a free set of 31" tires with black powder coated stock jimmy rims on em and me and my dad werent sure if they'd fit. We put em on my 2000 2 door 4wd jimmy and there is perfect clearance and they raise the truck up a good 2 to 3 inches. The only problem if any is if you turn the wheel all the way to the left or right you may rub a little but thats it. Im not worrying about it
yes this happened to me to
but i drive a lemon
that's what i did and it hasn't done it sence
Where is the ECM located on a 1986 S-10 Blazer?
The ECM is located on passenger side to the right of the glove box almost behind the door hinges.
Where is the ECM located on a 2002 eclipse GT V6?
Behind the HVAC case on the passenger side against the firewall. It is hidden behind an outlet vent.
What causes valve noise only when engine is cold on 99 jimmy 4.3l?
Valves probably need to be readjusted back to spec. Get a service manual for your vehicle to look up the procedure for doing this. Generally just need basic tools and a feeler gauge.
What Episode was Jimmy Cindy Love Connections?
In the episode "king of mars" they express their feelings and in "Lady sings the news" they end up kissing
Cindy and Jimmy do like each other. :)
How to install a transfer case in a 98 GMC Jimmy Blazer?
You can get a exploded view (blue print) from the Part Source along with the torque specs. It will have the procedure as well
Gmc jimmy air bag clock spring how to replace it?
The clockspring is replaced by removing the airbag, and by removing the steering wheel. From there disconnect the old clock spring, and put in the new clock spring, and replace everything in reverse order.
How do remove the key cylinder in a 1998 gmc jimmy?
If you have the "PassLock" Security system on your vehicle, you MUST take it to the dealer to have the ignition changed out. The will have to reprogram the security system to match. If they don't your security may stay engaged which will cut of the fuel.
== == The most likely cause has nothing to do with the blower motor. All the blower motor controls is the speed by which the air comes out. The cause for this is usually a little part called an "air blend door actuator". It is a module that sits just on top of the heater core housing that moves a door back and forth from the "cool" air coming from outside the engine compartment, and the "warm" air coming from inside the engine compartment. The gear that the door's shaft rides in typically gets worn out and reverts back to it's "default" position, which is in the middle. To fix it, you have to remove the lower plastic cowlings under the dash, then you have to remove: the upper cowling around the headlight cluster, the dashboard cluster, the radio, and the comfort controls. Then you have to remove: the radio, comfort control switches, speaker covers and speakers, and defrost vent cover. Then you have to remove the dashboard, by removing all the torx bolts you can find. There are also small trim bolts with the washers, and a few cap bolts on either end of the dashboard (2 up under the dash on the sides, that you have to really look for). Then the last part is to remove the 2 bolte that face up on the bottom of the steering column. THIS MIGHT REQUIRE 2 PEOPLE!!! When the steering column drops, the dash will come with it, but you need to tilt it back towards the seats while lifting it to pull it out. You don't actually need to pull it completely off, b/c to do so you have to disconnect A LOT of extra harnesses!!! Then to actually take off the actuator, it is located on the passenger side, right above the big black plastic box (heater core housing). You just disconnect, the harness, and then use a flashlight to see the 2 bolts. They are small, but not very visible. One is as close as can be to the top lip of the heater core housing (closest to you), and the other is directly across from it. There is also a tab that sticks up to help align it. The 3 are almost in a perfect triangle. You may need to move the big wiring harness out of your way. It will take you 5-8 hrs, but don't move too fast. Take your time, b/c if something isn't coming free it is still bolted somewhere to something!!!! TRUST ME!!! You will need a 6-10 mm and/or 1/4-3/8 sockets, 1/4 driver, some extensions, 1-2 flatheads, and 1-2 picks. GOOD LUCK!!!
