0
Pulleys
A pulley is a mechanism composed of a wheel on an axle or shaft. A rope, or cable usually runs over the wheel and inside the groove. Pulleys are normally used to change the direction of an applied force to make the work easier. It is one of the six simple machines.
1,797 Questions
Does the 1995 Pontiac Sunfire have a tension pulley?
If your car has a serpentine belt it will have a tensioner pulley. A tensioner pulley is easy to spot. All of your bolt on accessories i.e. water pump, alternator, a/c compressor etc. will have a pulley to run each one. There will be 2 other types of pulleys, a idler pulley and a tensioner. The idler pulley will be a single stationary pulley with a bolt going through the middle and the tensioner pulley will be on a spring loaded piviot.
How do you adjust the tension of the serpentine belt on a 1999 Dodge Durango?
You dont adjust the tension on a serpentine belt, Dodge uses a spring loaded tensioner located just below the alternator, If your belt is loose it is either worn, the wrong size belt or your tensioner has frozen and not moving. If it is a brand new belt I would suggest making sure the correct one was given to you from the auto parts store. If the belt has been on the vehicle for an extended period of time I would suggest replacing it.
Where is tensioner pulley 2003 altima?
its in the passenger of the engine. if you look on that side of the engine (passenger side) , its gonna be in the middle where the belt is located. its also the one that spin with the alternator.
Should the idler pulley turn freely when replaced without the engine running?
Yes. It is a dummy pulley, its only purpose is to keep the belt in place and tight.
How do you remove the bolt holding the tensioner pulley?
well i know on my 94 blazer it turns in the opposite direction.
pulleys help you pull up heavy things like huge rocks.
How do you get the fan on your '94 Ford Ranger to stop banging against the belt pulley system?
If the fan hasn't been changed, and is the correct one, it should not be hitting unless the bearing is worn in the waterpump, or the fan clutch is defective.
How do you remove a pulley from the 96 olds 88?
To remove the pulley from a 1996 Oldsmobile 88, first disconnect the car battery for safety. Then, use a suitable socket and ratchet to remove the bolts securing the pulley. If it's a harmonic balancer, you might need a harmonic balancer puller to safely detach it from the crankshaft. Finally, ensure all components are clear and gently pull the pulley off.
Do you have a ac bypass pulley for a 2000 Saturn LS sedan 3.0l v6?
Yes, an AC bypass pulley for a 2000 Saturn LS sedan with a 3.0L V6 engine is available. This pulley can be used to replace the AC compressor if it's not functioning, allowing the engine to run without the air conditioning system. You can find it through auto parts retailers or online marketplaces that specialize in automotive parts.
How do bypass air conditioner pulley on 2004 Jeep liberty?
To bypass the air conditioning pulley on a 2004 Jeep Liberty, first, disconnect the battery and remove the serpentine belt. Then, locate the AC compressor and remove its mounting bolts to free it from the engine. You can then install a shorter serpentine belt that bypasses the AC compressor, ensuring it's properly routed around the other pulleys. Finally, reconnect the battery and start the engine to ensure everything is functioning correctly.
What kind of blinds and which direction. Mini blinds. In width, draw the blind all the way up, hold tightly, and a hacksaw can be used to cut the ends. A power miter saw can be used if you hold the blind VERY tight and go VERY slow on the cut. If not experienced I would use the hacksaw. You can only shorten them by about 2 inches in width. In length, the bottom rail come off, shorten how ever much needed and reinstall the the bottom.
Does purchasing an aged shelf corporation make it easier to get financing?
Hey there,
My wife and I purchased an aged shelf corporation from IntelligentRM.com on August of 09. We owned a truck fleet with 25 dump trucks that was 4 yrs old, and was trying to get a government bid with ccr, but got denied because of the age of our company and the D&B report was poor.
Intelligentrm.com did a reverse-merger on a 15 year old company and changed our name to current out of Delaware, and it had an 80 Paydex score. We won a $3.6M four year bid with contractors registration working in rural tx. We spent about $12,000 for the company, but you do the math....
Since the bid we won, we've gotten about $200k in biz loans from wachovia bank... couldn't with our old company because it was too new and no established D&B profile.
Hope this helps.... we were scammed three times before we hired IRM - they also used to work @ D&B themselves.
A pulley is consists of groved a over which a string or rope passes...by sherezade
Who made the compound pulley system?
I don't think anybody knows who originally made it, but Christiaan Huygens developed most of the math to explain it.
How many types of rats are there?
There are two basic types of rats. Black/roof rats and Norway/brown rats.
The brown rat, is also known as the Norway rat, house rat, gray rat, barn rat, and wharf rat, is one of the best-known and is the larger of the two. Roof rats are also called black rats and ship rats.
What other simple machine is like a pulley?
A sprocket is like a pulley, the difference being that a sprocket has gear-like teeth, to transport a chain rather than a belt. A bicycle has two sprockets, one attached to the pedals, and one attached to the rear wheel.
