0
Hand Tools
Hand tools are hand-operated products that assist workers in building, gardening, and fixing a variety of objects.
1,927 Questions
The starter was hit with a wrench and turned over for a second now car wont start why?
It is very likely that you have a stuck starter solenoid. That's the part that moves the starter's worm gear forward, so as to engage with the flywheel, so that the starter motor can turn your engine over and start it up. Once the engine starts, and you release the ignition key, the worm gear retracts back into the solenoid until it is needed again. Over the course of time, these solenoids become sticky, and refuse to move forward and engage the flywheel. Fortunately, there is an easy test for this problem, and it has never failed me. goes as follows;
Set the emergency brake, and put the tranny in neutral. If it's an automatic, put it in Park. Either way, chock the wheels. This is very important . You'll see why a little latter.
Crawl under neath the car with a responsible adult at the wheel.
use a heavy wrench, such as a large adjustable.
Have your helper sit in the car, holding the ignition key all the way over , in the start position.
From underneath the car, use your big wrench and bang on the solenoid. (It's the smaller part that is attached to the side of the starter motor.) Ya don't wanna dent it, Just give it some good whacks. This alone just might free up the piston on the inside of the solenoid, and at that point, your engine just might start. If not, then start to bang on the starter itself, and I mean give er a bunch of pretty good wacks ! I know sounds entirely like a cave man tactic, but it works. Keep in mind that your partner is still holding the key over, so if you smell anything burning, or see smoke, tell your partner to release the key, then wait a while and then try it again. You might wanna give it a rest every five minutes or so, to let things cool down. I once spent all but 20 minutes under a car before she finally fired up. Your partner should understand that if the motor begins to turn over, he or she should not let off of the key until the vehicle actually starts, and if it does, don't shut it off until you go out and buy a new starter motor. ( In the old days we could just buy the solenoid, but no more. You'll need to buy a new starter with the solenoid already attached. Leave the car running at the auto parts store, and be careful to not stall the engine on the way home.
At that point, things will be easier. Disconnect the battery. Unbolt the starter, and drop it to the ground, but save it, because you might be able to get money for it at the auto parts store. (Called a "core exchange") Bolt the new starter in, reconnect the wires, and then reconnect the battery. Problem should be solved. Or, you could just park on a hill where ever you go.. :) It it was me, I'd get a hew starter.
What size socket do you need to remove the hub nut on a 2004 Chevy pickup?
I think that is a 1 and 1/4 socket.
What size hex or star head wrench for a 1996 Chevrolet front calipers?
It's a really simple job to remove the wheel and look at the bolt head to verify this.
It should be a 3/8" allen wrench.
What is the proper way to store a torque wrench?
Preferably in a box or tray where it will not get damaged.
What are the uses of double ended offset screwdriver?
These are very unique screw drivers, made for low access screws. In my experience, the most common use for these are installing the screws on door knobs. The handles protrude into the path of the screws, so these offset screw drivers allow you to secure the fasteners without scratching the finish of any door knobs.
What does a spanner nut look like?
Exactly the same as any other nut. Spanner is just British terminology for wrench.
What size wrench is needed to take the oil pan plug off in a 1998 Expedition?
I believe is a 5/8 or 11/16. But of course an adjustable wrench works just find.
Can you get a flaming wrench in ratchet and clank 3?
There are some boxes that are yellow and have a picture of a flame on it. Whack these boxes with the wrench and you will get a flaming wrench for a limited time.
What size wrenches are needed to remove the catalytic converter on a 2003 Chevrolet Impala?
It is against Federal law to tamper with the emission systems on a car.
Why are monkey wrenches called monkey wrenches?
monkey wrenches are named appropriately because due to their dexterity they can reach places that we as humans can not.
What size wrench is needed for the oil drain plug on a 2005 impala?
It is a metric bolt and I believe it's a 15 millimeter.
Did Lewis and Clark use pliers for camping equipment?
They very well could have, albeit a very crude form and not the kind of pliers we use today. Here's a list of what they did have:
6 Copper kettles (1 of 5 gallons, 1 of 3, 2 of 2, & 2 of 1)
35 Falling axes
4 Drawing knives, short & strong
2 Augers of the patent kind
1 Small permanent Vice
1 Hand vice
36 Gimblets assorted
24 Files
12 Chisels
10 Nails
2 Steel plate hand saws
2 Vials of Phosphorous
1 container of phosphorous made of allum & sugar
4 Groce fishing hooks assorted
12 Bunches of drum line
2 Foot adzes
12 Bunches of small cord
2 Pick axes
3 Coils of rope
2 Spades
12 Bunches of small fishing line assorted
1 lb. Turkey or Oil stone
1 Iron mill for grinding corn
20 yds. of oil linen for wrapping & securing articles
10 yds of thicker quality for covering and lining boxes
40 yds of strong cloth to form two half faced Tents or Shelters
4 Tin blowing trumpets
2 Hand or spiral sping Steelyards
20 yds strong Oznaburgs
24 Iron spoons
24 Pint tin cups (without handles)
30 Steels for striking or making fire
100 Flints
2 Frows
6 Saddlers large needles
6 Large awls
Mosquito curtains
2 Patent chamber lamps & wicks
15 Oil cloth bags for securing provision
1 Sea grass hammock
What do you call the puncher for comb binding?
A paper punch. Some comb binding machines have the paper punch built in and some need a separate paper punch. Most are manually operated, but for large quantity an electric paper drill is used instead.
Where is the lug wrench on 2001 sable?
According to the drawing in the 2001 Mercury Sable Owner Guide :
It shows that the lug wrench is UNDERNEATH the spare tire , in the spare
tire well , under the carpet , in the trunk
Was there a Great Neck Saw Manufacturers Inc located in England?
I don't think so. I have used Great Neck tools for many years, and as far as I know they started in 1919 in Mineola, NY and have been there ever since.
What type of wrench is needed to remove caliper bolt on a 1999 Mercury Cougar?
I believe it's either a 40 or 45.
What do the wrench light means in Honda civic 06?
it usually means your oil is down to 15% of its life and it is soon time to get an oil change.
How do you turn off 2007 accord yellow wrench dash light?
Take it to the dealership and let them charge you $60 for a $19 oil change. They will then go to the secret hiding place and switch the light off. Funny how I have looked everywhere I can online and can't find the answer to that question.
How do you get the wrench to fix the telescope?
You always have it with you. The wrench is located on your spy phone.
Your 1997 geo tracker will not start unless you jump the solenoid with a screwdriver what is wrong?
replace the solenoid ,is shorted.
