0
Chevy Corvette
Launched in 1953, Chevy Corvette is a sports car manufactured by General Motor’s Chevrolet division. Harley Earl designed its first model, a convertible. It is Commonwealth of Kentucky’s official sports car.
4,587 Questions
Who was the Mayor of Elizabeth City NC in 1987?
According to the City Website: http://www.cityofec.com then 'City Government' then 'History of Elected Officials' It was: T.L. Newell Jr until Dec 7th 1987 M.R. Daniels Jr after Dec 7th. Google is your friend - I don't live there.
Can a 427 or 454 big block engine fit in a 1977 Corvette with minimal modification?
You should be able to. The 454 came stock in the '74 which is the same body style.
How do you raise the headlight in 1998 corvette if the motor is bad?
MANUAL HEADLIGHT MOTOR KNOB ON MOTOR. IT SHOULD BE IN YOUR MANUAL ALSO.
How do you remove the automatic shift knob on a 1995 Buick LeSabre to put in a new one?
You'll have to pull the old one straight off the shaft. Try twisting it as you pull, they are usually stuck on there pretty good.
Where is the fan sensor located on a 1990 Chevy Corvette?
The coolant fan switch is located close to the thermostat.
Where is the option list on a 1987 Corvette?
== == The option list on a 1987 Corvette is on a label stuck to the underside of the console cover.
How do you remove a starter from a 1977 Corvette?
Location on passenger's side (right side) of engine near back of engine... for details.. suggest you go to corvetteforum.com and sign up.. free.. this is not spam.... if you can't find the answer there.. it ain't possible to do... for all Vette questions check there first.. usually very detail instructions and diagrams....
Where can I get a vacuum hose diagram for a 1996 corvette LT1?
Try this link http://www.autozone.com/az/cds/en_us/0900823d/80/21/f8/14/0900823d8021f814/repairInfoPages.htm If the link doesn't work, go to www.autozone.com, select 'repair info', then 'repair guides' and drill down.
Where is the ac compressor relay located on a 1985 corvette?
It's a black box on the driver's side that has a multipin connection on the bottom with about 4 wires coming out. It also controls the cooling fan.
How do you remove the glass top from a 1985 corvette?
You unscrew the front bolts (two) and the rear bolts (two) with a hex head or Allen wrench key
Where is the oil temperature sensor located on the 91 Acura Legend?
The 1991 Acura Legend does not have an oil temperature sensor. It does have an oil pressure sensor. The oil pressure sensor will be located on the left-hand side of the engine.
Where is the high beam switch in 1975 Corvette?
== == It's on the floor sometimes hidden by the carpet.
How do you install a front sway bar on a corvette?
What year? Basically the bar is secured to the frame with bushings at 2 points at each end of the straight portion... and the ends are secured to the lower control arm with linkages bolts usually aprox. 6 inches to allow the control arm to go down and up with out restriction of movement. Rubber or poly material bushings are used between between the retainers and a sleve around the bolt is used in between the ends of the sway bar and the control arm. the sleeve absorbs the compression side and the bolt maintains the other when the vehicle sways.
Does a 1986 corvette take mobile 1 oil?
You can use Mobil 1 if you desire, but you can also use conventional oil.
How do you remove Mazda b2300 shift knob?
The factory shift know is simply pressed into place. To remove the knob, pull on it.
If it's still on quite tight, you maybe need to firmly twist while pulling the shift knob. If all else fails, use a piece of leather to protect your know, and some channel lock pliers to work the knob back and forth until it is loose enough and can be removed.
How do you adjust 1981 corvette parking brake?
ask this question on digitalcorvettes.com in the c3 forum...you will get a good answer
Actual horsepower for the 2010 Corvette?
430HP for the base model (436HP with performance exhaust), 436HP for the Grand Sport, 505HP for the Z06, and 638HP for the ZR1
How do you remove the gas tank in 1986 Corvette?
First take out spare tire and everything that will be in the way of seeing the tank. then you need to take off the rear bumper skin. there are about 25 30 bolts holding it on. just look for them and take them out. it took me 2 hours to get it off so be patient. (I'm doing this in my back yard with the rear of the car on stands.) make sure to remove all electrical connections before letting the skin fall or you moving it too far. make sure to disconnect the connections to the side markers, tail lights, sender and such. now undo the rubber fuel lines connected to the sender. the next step is where i got stuck and couldn't find an answer to what to do next. if you try to take the gas tank out the back right now it will not fit.... trust me. there are 6 bolts that are stopping it from coming out. its on the frame rails just behind the tank. there are 4 bolts on either side that hold on the back sub frame. undo the closest 3 to the tank on both sides. leave 1 in on each side so when you put it back together you wont want to start swearing and throwing wrenches. it will be a lot easier to put back together and align properly. after you undo these bolts the frame rails will be able to drop down about 4 to 5 inches. then wrestle the tank out of its resting spot.
What years were the Chevrolet Corvette z06's made?
1963 (it was a racing package), 2001-2004 and 2006-present.
What was the original sticker price of a 1970 Chevrolet Corvette?
A 1970 Corvette Sport Coupe sold for $5,192 base price.
All V8 Chevrolet's are 1,8,4,3,6,5,7,2 with 1,3,5,7 on the left bank and 2,4,6,8 on the right with the distributor rotating clockwise.
Why would the turn signal lights not work in a 79' Corvette Fuse seems ok?
If you're sure the fuse is okay, the next thing to check is the bulbs. If the bulbs are okay, the problem could be the turn signal relay, also called the flasher relay.
