Honda Civic CX

Ethene, or ethylene, is the starting point for many plastics due to its simple structure and availability, making it a key building block in the petrochemical industry. It can be polymerized to form polyethylene, one of the most widely used plastics, thanks to its versatility, durability, and cost-effectiveness. The ease of modifying ethene's structure also allows for the creation of various copolymers, enabling the production of plastics with tailored properties for diverse applications. Additionally, ethene's production is economically efficient, further solidifying its role as a foundational material in plastic manufacturing.

The EACV (Electronic Air Control Valve) on a 1989 Honda Civic CX is located on the intake manifold, typically near the throttle body. It plays a role in controlling the air intake for the engine, particularly during idle and acceleration. To access it, you may need to remove some components around the throttle body for better visibility and reach. Always remember to disconnect the battery before performing any maintenance related to the electrical components.

To install the rear brakes on a 1995 4x4 Suburban, start by safely lifting the vehicle and removing the rear wheels. Remove the brake drum by pulling it off the hub; if it's stuck, you may need to use a brake drum puller. Replace the brake shoes by removing the old ones and installing the new ones in the same orientation, ensuring the adjuster and springs are properly positioned. Finally, reassemble the drum and wheel, then test the brakes to ensure they operate correctly.

The 1996 Honda Civic does not have a dedicated power window control module; instead, the power window system operates through the master switch and individual window regulators. Since you've already replaced the master switch, regulator, and motor, the next step would be to check the wiring and connections between the master switch and the driver's side window. Additionally, inspect the fuses related to the power windows, as a blown fuse could prevent the driver's window from functioning. If all wiring and fuses are intact, further diagnosis may be needed to identify any intermittent issues.

No, a D series fork and pressure bearing cannot be used on a B series transmission without modifications. The D series components are designed for a different architecture and may not fit properly in a B series transmission due to differences in dimensions and mounting points. It's advisable to use parts specifically designed for the B series to ensure proper function and reliability.

A 2000 Honda Civic typically requires about 4.4 quarts of oil when equipped with a 1.6L engine and with a filter change. If it has the 1.7L engine, it generally takes around 4.5 quarts. Always refer to the owner's manual for the most accurate specifications.

The radiator fan on a Volkswagen Lupo may not be working due to several potential issues, including a blown fuse, a faulty fan relay, or a malfunctioning temperature sensor. Additionally, the fan motor itself could be defective or there may be wiring problems that prevent it from receiving power. It’s important to diagnose the specific cause to ensure proper cooling system function and avoid engine overheating.

Multi-port injection (MPI) is a fuel delivery system used in internal combustion engines where fuel is injected directly into the intake manifold, specifically near each intake valve. This allows for better atomization and mixing of fuel with air, improving combustion efficiency and engine performance. MPI systems typically provide better throttle response and lower emissions compared to older single-point injection systems. Additionally, they can help optimize fuel distribution across all cylinders, enhancing overall engine output.

On a 1997 Honda Civic CX, the coolant bleeder valve is located on the engine block, specifically on the thermostat housing. To access it, you'll need to look near the upper radiator hose connection. The valve is a small screw or bolt that can be opened to release trapped air from the cooling system during a coolant change. Be sure to do this when the engine is cool to avoid burns.

To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.

The 1992-1995 Honda Civic Hatchback models that typically come with a manual sunroof are the EX and VX trims. The CX trim generally does not include a sunroof option. The EX is equipped with more features and options compared to the CX and is more likely to have a manual sunroof as part of its offerings. The VX also may have the option depending on the specific configuration.

To find your car's license plate number after it has been towed, you can check your vehicle registration documents, which typically display the license plate number. If you don't have the documents, contact your local DMV or vehicle registration office, as they can provide the information based on your vehicle's VIN. Additionally, you can reach out to the towing company directly for assistance, as they should have records of the vehicles they towed.

To perform air conditioner repairs on a 1994 Honda Civic, start by diagnosing the issue, which may involve checking the refrigerant levels using a gauge set. If low, recharge the system with the appropriate refrigerant. Inspect the AC components such as the compressor, condenser, and evaporator for leaks or damage, and replace any faulty parts. Finally, ensure that the electrical connections and fuses are functioning correctly before testing the system.

To close a stuck lever action, first ensure the firearm is pointed in a safe direction. Check if the action is jammed by inspecting the chamber and magazine for obstructions. Attempt to gently pull the lever back while simultaneously pushing the bolt forward. If it remains stuck, consider using a cleaning rod or similar tool to carefully nudge the mechanism back into place, but avoid applying excessive force to prevent damage.

To remove the rear brake drums on a 1989 Oldsmobile Cutlass Ciera, first ensure the vehicle is safely lifted and supported on jack stands. Remove the wheel and tire, then locate the brake drum. If the drum is stuck, tap around the edges with a hammer to loosen it, and if necessary, remove the adjuster access plug to back off the brake shoes. Finally, slide the drum off the wheel hub.

In a 1995 Chevy Lumina, the speedometer cable connects to the transmission at the speed sensor. The other end typically attaches to the back of the speedometer gauge in the instrument cluster. To access it, you may need to remove the dashboard or instrument panel. It's important to ensure the cable is properly secured to avoid issues with speedometer readings.

For a 1996 Honda Civic with a 1.6-liter engine, the cylinder head torque specifications typically require an initial torque of 29 ft-lbs (39 Nm) in sequence, followed by an additional 90-degree turn, and then another 90-degree turn. It's important to follow the specified tightening sequence to ensure even pressure across the head. Always consult the vehicle's service manual for the most accurate and detailed information.

To address the ASM emissions high emitter profile on your 1995 Honda Civic, start by performing a thorough inspection of the vehicle’s emissions system, including the catalytic converter, oxygen sensors, and exhaust gas recirculation (EGR) system. Ensure that all components are functioning properly and replace any faulty parts. Additionally, consider cleaning the fuel injectors, replacing the air filter, and using a fuel system cleaner to improve combustion efficiency. Lastly, ensure the vehicle is properly warmed up before the test and consider taking it for a drive to clear any potential error codes.

Surging in a snowblower is often caused by inconsistent fuel delivery, which can result from a clogged fuel filter, a dirty carburetor, or improper fuel mixture. Additionally, air leaks in the intake system or a malfunctioning governor can lead to fluctuating engine speed. Maintaining the fuel system and ensuring proper tuning can help prevent surging. Regular maintenance, including cleaning or replacing filters and inspecting the carburetor, is essential for optimal performance.

on an 85 Honda accord the fuel pump is external ,meaning that the pump is not located in the fuel tank which most are located now a days, it is located on the driver side along the left side of the vehicle about a foot from the rear tire . there is a cover which has 3 bolts holding it ..underneathe is the fuel pump.

hopefully your not stealing the vehicle. but you will have to remove the steering wheel and then remove the key switch itself, purchase a new key switch and replace. However if its only to move the vehicle, after you remove the key switch you can take a screw driver and turn the mechanism in the column to unlock.

There might not be a cable. Some have an electronic pickup for the speedo, so what you will be looking for is a device with a couple of wires coming from, around the same place the speedo would normally hook up- the left side of the adapter housing for the transfer case.

you must lift up the civic with the driver side tire off then u gotta get the axle loose u might need to remove the whole left side suspention to free up the axle then u gotta get the alternator loose and remove it and then reverse.

/ The alternator can be removed by lifting front of car and driver side suspention lowered so that tire is just touching, then the alternator will have clearance to slide by driver side axle from under vehicle without removing any suspention. My son and I just did this so it should work on yours. (Aug 21, 2008)