answersLogoWhite

0

Pontiac Grand Am

The Pontiac Grand Am is a mid-size car manufactured by General Motors’ Pontiac division. Available as a 2-door coupe/4-door sedan, this model was produced in five generations. The fourth and fifth generation models belong to the compact car class.

2,070 Questions

What causes a 94 Pontiac sunbird to quit after driven awhile then it starts back up and quits when put into gear?

The issue with a 1994 Pontiac Sunbird quitting after running for a while and then stalling when put into gear could be related to several factors. Common causes include a failing fuel pump, which may not provide consistent fuel pressure when hot, or a faulty ignition system, such as a bad ignition coil or spark plugs. Additionally, a malfunctioning torque converter or transmission issues could also contribute to the stalling when the vehicle is placed in gear. It's advisable to perform a thorough diagnostic to identify the exact cause.

What weight of oil for 1995 grand am?

For a 1995 Pontiac Grand Am, the recommended oil weight is typically 10W-30 for most driving conditions. However, in colder climates, 5W-30 may be preferable for easier starting. Always consult the owner's manual for specific recommendations based on your vehicle's engine and operating conditions.

1999 Pontiac grand am se and the dash lightdoor lights shifter and radio light don't work after radio light was cut?

It sounds like there may be a blown fuse or a wiring issue stemming from the radio modification. When the radio light was cut, it could have inadvertently affected the electrical circuit that powers the dashboard lights, door lights, shifter light, and radio light. Check the fuse box for any blown fuses and inspect the wiring connections near the radio for any damage or loose connections. If the issue persists, consulting a professional mechanic may be necessary for a thorough diagnosis.

How do you replace a fuel tank pressure sensor on a 2003 Pontiac grand am?

To replace the fuel tank pressure sensor on a 2003 Pontiac Grand Am, first, relieve the fuel system pressure and disconnect the negative battery cable. Then, access the sensor by removing the fuel tank or, if possible, the access panel in the trunk. Disconnect the wiring harness from the sensor, unscrew it from the tank, and install the new sensor. Finally, reconnect the wiring, reassemble any components, and reattach the battery cable.

How fix the code c1092 on grand vitara 2006?

The C1092 code on a 2006 Suzuki Grand Vitara typically indicates a malfunction in the vehicle's brake system, often related to the ABS (Anti-lock Braking System) or a wheel speed sensor. To fix this issue, first inspect the wheel speed sensors and their wiring for any damage or disconnection. If the sensors appear intact, use an OBD-II scanner to perform a diagnostic check and clear any fault codes, then test drive the vehicle to see if the code returns. If the problem persists, consider consulting a professional mechanic for a thorough inspection and repair.

On a 2002 Dodge Grand Caravan how do you reattach a loose passenger side view mirror?

To reattach a loose passenger side view mirror on a 2002 Dodge Grand Caravan, first, locate the screws or bolts securing the mirror to the door. If the mirror is only loose, tighten these fasteners using the appropriate screwdriver or socket wrench. If the mirror has come completely off, you may need to realign it and then secure it back in place. Ensure the adjustment mechanism is functioning correctly before finishing the reinstallation.

Where is the turn signal flasher on a 2002 Jeep Grand Cherokee?

In a 2002 Jeep Grand Cherokee, the turn signal flasher is typically located in the fuse box under the dashboard on the driver's side. You may need to remove the cover of the fuse box to access it. The flasher is usually a small cylindrical component and may be labeled in the fuse box diagram. If you're having trouble locating it, consulting the owner's manual can provide additional guidance.

What tool and size is used to take out the oil drian plug on a 2005 Jeep Grand Cherokee 4.7 liter?

It would be preferable to use a socket or open end wrench of the proper size. Just try some until you find the one that fits. (It is probably metric, so you may need to buy a set of metric sockets or wrenches.) Or just use an adjustable wrench. An adjustable wrench has the nasty habit of rounding the corners off a bolt if it is set too big, though. I don't want this to sound rude, but if you have to ask this question perhaps you shouldn't be changing your oil...