answersLogoWhite

0

Ford Bronco XLT

The Bronco XLT is one of the three models available for the 1996 Ford Bronco; the other two were XL and Eddie Bauer. The Bronco XLT features anti-lock brake system, a full-size spare tire and a driver airbag.

2,925 Questions

How do you repair a left rear power window on a 1993 Mercedes 190e?

possible rear window repairFirst , check power to the motor. If the switch is working in the door you should hear the motor try to work up or down.

If no power check for 1. fuse 2. frt switch power (console) 3. duuh-safety lock off?

If these are good and you have power to the motor I can't help you at this point. But if the motor is good and the lift mechanism is the culprit here are a few things that have worked for me.

The usual part that fails is the slider on the track. This metal/ plastic part is a cheap piece of crap not in the old school MB tradition.

Grasping the window move it to bottom position by the motor or sliding it down as far as you can go. Release the black clip that holds the window in the slider piece. It will be necess. to remove the regulator by the 3 -10mm nuts and 2 -10mm bolts in the top of the track and bottom. Note the position of the slots in the top and bottom for reaassembly

When the regulator is out you will note that the metal piece has spun around and has separated from the plastic part that slides on the track.

Inside are the ends of the cable and a metal clip to secure it -(it goes on top of the cable to hold it and act as a buffer) The cable must fit in the groove in the plastic piece under some tension (It's not much, -put it in full bottom,stretch the cable and reinstall) If the cables are in the slider and under some tension skip this step make sure the cable is in the pulleys.

Now move the metal piece to line up with the plastic piece. It should rotate on the horiz. axis to mate with plastic. Secure by drilling and riveting( best) or super glue and zip ties ( kinda riggish, but may work for awhile.

Careful not to drill through the slider cable slot

If the cable is broken or the motor is huffed you are out of luck. used windows are in the 250 range....... questions ? reeltapegone@hotmail.com Matt Laube

How do you replace the heater core on a 1990 Chrysler LeBaron?

Big job. Get a manual on your car to do it right.

ya, real pain in the ass, have the same car. had to rip the hole dash out and then theirs a huge air box you have to dissasemble ac might get in the way to took me all day id pay someone else to do it

Stimulus for smelling?

The stimulus for smelling is olfactory. The olfactory is molecules that are in your nasal passages

Where can you find an online diagram for installing a manual transaxle on a 2000 Hyundai Accent?

I've had pretty good luck finding online diagrams and instructions at the Autozone Repair Info site. If that doesn't work out, you can locate the instructions in a Chiltons or Haynes manual, which I don't think exists on line, but you can usually find them at your local library, and then make copies of the applicable pages.

AnswerHyundai web tech 2000I bought a subscription to an online manual for a 2000 accentgl at http://www.alldatadiy.com/index.HTML .There's a 2 month waiting list at the dealership to purchase a manual for this make and model,and year. I will never buy another Hyundai again.The alldata manual isn't the greatest but it's better than nothing at all. .

What weight motor oil does a 1992 Ford F-150 5.8 V8 need?

I just inherited my grandfathers 1992 Ford F-150 5.8L V8 and the sticker on the window says "10-50".

Answer It should use 10w30 motor oil.

you should use what it tells you to use

What would cause a metal on metal clicking in the engine It speeds up with the RPM'sI'm pretty sure the head gasket is blown but would that alone make all that noise?

if there is no smoke coming out of the tail pipe and your oil has not change color(milky white) then your headgasket is not the problem. the sound you hear is your lifters. they are not lubricating properly. check your oil level and quality also pressure. if you are using 10/30 try changing to a thicker oil. depending on your vehicle's year and miles you may need that extra layer of lub that a thicker oil provides. try also getting an "engine lucas" check your auto parts store they should know what that is. this will help your engine lubricate better and quiet the noise down.(i've used it) ''drive your car for a few days/miles and you should notice the diffrence.''

Where do I find a Diagram of a 1992 ford bronco Eddie Bauer stereo wiring?

i would recomend picking up a Haynes or Chiltons repair manual Haynes is designed for people with little to know experience and chiltons is closer to a dealer ship shop manual

Why does my car smell like freon?

Since you are aware of what freon smells like , and you must know what it is used for , there is only one system in an auto that uses it.

Whats the location of the thermal switch on a 1999 olds intrigue 3800 series II?

I NEED THE ANSWER TO THIS QUESTION TOO. MY COOLING FAN DOES NOT WORK TILL THE TEMPERATURE GAUGE REACHES 3/4 HOT.