0
Ford Windstar
The Windstar was a minivan manufactured by the American automaker Ford Motor Company. This front wheel drive (FWD) minivan was manufactured in two generation models from 1994 to 2003.
2,843 Questions
Where is the abs control module on a 98 Chevy lumina?
Please let me know as well were the abs module is if you ever find it, sssmdg@yahoo.com I also need to know were the flasher module is as well. I have no blinkers or flashers and all the fuses are good
What does airbag code 52 mean for 96 ford windstar?
The airbag code 52 on a 96 Ford Windstar often means nothing more than that there is a loose connection in the electrical system. The code can be reset by disconnecting the battery for about 10 minutes, then reconnecting it. If that doesn't work, the code may also be indicating that the airbag itself is not getting power and requires servicing.
A resistor designed to protect a circuit against overload.
Siphoning gas from 2003 ford windstar?
Now I about to do this and I fashioned a power lead with a Push on and off switch and going to unhook the fuel line and hook the power lead to the pump and with at small hose to a gas can flip the switch and let it fill the gas can with the pump just have to find away to get to the pump it has a cover on it and yes I tried the other way and the garden hose will not go in side the tank because of a dumb check ball valve
Creaking in the front right side of a 2000 Windstar?
Probably a control arm bushing, possibly a strut mount or stabilizer bar bushing. Mine was the control arm bushing, 2001 Windstar Sport pkg.
How much should it cost to replace a flywheel on a 2000 Ford Wind star?
It should only cost about $50-$90 to replace the Flywheel of a 2000 Ford Windstar, is a person is doing the work themselves. If they are not it can cost $150+ depending on labor charges.
2001 ford windstar 3.8 liter ignition wire routing?
A haynes manual will have that. Find at your local auto parts store.
What are the warning signs of a bad sway bar on a 1995 ford windstar?
I believe they are also called (stabilizer bar),they are behind the front tires,1 on each side of course.Usually you start hearing a knocking sound when hitting bumps.People say to exchange both at the same time but not necessary.Get them fixed asap because they wear down the connection area and you don't want them to break while driving because you could lose steering ability.
I'm weak on Ford's, but as far as I know the sway bar goes across from one wheel to the other in front of the wheels. Damage from impact or worn rubber bushings.
How do you clean headlight assembly 1999 ford Windstar?
The lenses, like those of many other newer model cars, get cloudy with time. This cloud can be removed by way of simple polishing. If you have access to a right angle drill and a polishing pad, you have the tools you need. Now, before mounting your polishing pad on the rubber, (flexible), backing plate soak it in water then wring it as dry as possible, by hand. Mount the pad then apply a bit of polishing compound to the pad and a smear on the lens. I use old fashioned Dupont polishing compound paste. Carefully polish the entire lens with the pad. Apply more compound as needed. Be careful. The compound is an abrasive and will remove the paint and chrome plating from neighboring parts. You can use masking tape to cover and protect them.
After a couple minutes of polishing, use a clean dry cloth to remove the compound haze. Continue working the compound on the lenses until you are happy with the results. Wipe them with the clean dry cloth and you're done. Think of it like waxing the car. By the way, the process can be done by hand too. It just takes longer. I don't recommend a standard straight angle drill as they are very hard to control on smooth rounded surfaces.
THE HEATER CORE MUST BE REPLACED. IF THE HEATER CORE DOES NOT
WORK THEN YOU'LL ONLY RECEIVE AIR PUSHING THROUGH THE VENTS
THE HEATER CORE HEATS UP WHEN YOU SET TO WARM/HOT AIR ON YOUR DASH BOARD (LIKE LITTLE HOT COILS) THE BLOWER FAN PUSHES THROUGH THE HEATER CORE GIVING HEAT AS IT PASSES THROUGH THE VENTS. THESE HEATER CORES GENERALLY COST $20.OO DOLLARS
EXAMPLE: YOU TURN ON A BOX FAN DURING THE SUMMER TO COOL OFF
AND EVERYTHING IS GOOD/COMFORTABLE. NOW YOU PLACE A RADIATOR
IN FRONT OF THE BOX FAN AND YOU'LL RECIEVE HOT AIR .
GET THE PICTURE. SO THE HEATER CORE AND RADIATOR WORK TOGETHER
AND THE ANTI-FREEZE. THE RADIATOR WARMS UP-THEN THE HEATER CORE
AND THE FAN BLOWER PUSHES THE WARM AIR OUT THROUGH THE VENTS.
HOPE THIS HELPS
HAPPY HOLIDAYS!
STAY WARM.
.......................................................................................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
CHECK THIS LINK http://www.automotiveforums.com/t524247.html
How do you fix a wiper arm on a 2001 windstar the bolt the arm sits on is stripped?
I would use a tap and die set to re-thread the shaft down one size.
Since it's just a hold-down nut, it won't affect the functionality.
How can you remove a 2002 Windstar VCR player?
There is a button under the top cover that releases the internal part of the vcr player to come out of the console.
Even though tape is so "yesterday", I still keep a few in the van for moments of idle entertainment ;)
(pun intended!)
How do you replace the front turn signal light bulb on a 1996 Saturn SC2?
rear you use a torx driver to remove taillight assembly screws. them replace bulb.
How do you tell if you have vortec heads or not?
the fastest way to tell is if the center intake bolts are not there.
the vortec heads that everyone wants for performance have no center intake bolts.
See link below.
2003 ford windstar vibration in front drive axle right side?
If you have verified the vibration is coming from the axle, then it needs to be replaced. It's not really a bad repair job - even for us backyard mechanics.
Vibrations can also come from a bad tire (split belts), or worn suspension parts.
See "Related Questions" below for moreWhy would the dashboard lights in a 2002 Chevy Trailblazer go on and off Fuses seem fine?
My guess would be a bad dimmer switch or a loose ground connection caused be a aftermarket radio being installed. Hope it helps!!! Slackers Of Va.
They need to be checked, cleaned and repacked.
Where locate cylinder no 1 on windstar 2001 3.8?
On a 2001 Ford Windstar , 3.8 liter V6 engine :
firewall
1-----2-----3
4-----5-----6
front of vehicle > driver
When should you flush the radiator on a Ford Windstar?
The engine coolant should be flushed at around 3-5 years - although I would not recommend the 5 years.
Keep an eye on coolant reservoir in the engine compartment - if there's any sign of it getting "ugly" - brownish, discolored, yucky - have the system flushed and refreshed.
See "Related Questions" below for more
How do you put the third row seat up in a 2003 Windstar and make it stay?
How do I repair my third row seats in my 2000 windstar that will not stay up properly.
What is the size of the tires for ford windstar 2000?
On a 2000 Ford Windstar :
Open the drivers door , and on the latch pillar will be an information sticker
that shows the original size of tires on the vehicle from the factory
How do you change a rear door lock actuator on a 1999 Chevy suburban?
Hire a professional technician!
Hire a professional technician!
From BLUESTG: All the door lock actuators are the same. They are labeled front, back, left, and right for the bracket that is put on them to attach it to the door. So you can buy any door actuator and just reuse the bracket in you current door. Just remove the rear door panel, it is held in place by plastic push in pins. So you may have to pry it a little to get it off. Reach up a pull out the connecting rod from actuator to the lock. Drill out the two rivits. Lower acturator and disconnect the wiring. Transfer bracket to new actuator. Connect wiring. install with new rivits, but I recomend short screws. The rivits tend to elongate after a lot of actuations. Attach rod from the lock. Test, and push on the door cover.
