How do you replace the cabin filter on a 2002 solara convertible?
There is no cabin air filter on a 2002 Solara Convertible. I took the dashboard apart and looked. No filter (but I did clean all the dust out from the underside of the dash while I was back there).
Have there been any safety problems with the Toyota Rav4?
The most current safety issue with the Rav4 is the acceration problem. This is common with almost all toyota models.
What ground clearance does the 2002 Toyota RAV4 have?
The ground clearance of the 2002 Toyota RAV4 is 0 ft. 6.3 in. (6.3 in.).
What kind of transmission does the 2012 Toyota RAV4 have?
The 2012 Toyota RAV4 has a 4-speed automatic.
How do you replace the rear wiper blade on a 2001 rav4?
Your best bet is to purchase a rear windshield wiper blade replacement arm (about $9 at Toyota dealers), part # 85242-42020 (I have a 2001 Rav4). I just bought my second one. The arm "snaps" onto the main arm's open hook via the little bar in the middle rectangle opening of the replacement blade. Ask your Toyota maintenance person to show you how to do it (s/b no charge).
What size wiper blade fits a 2010 Toyota rav4?
The 2010 Toyota Rav4 takes a 24" drivers side, 17" passenger side and a fairly specialized 12" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
What is the maximum payload of the 2013 Toyota RAV4-EV?
The maximum payload of the 2013 Toyota RAV4-EV is 973 lbs..
Why is the cabin filter important and will the car run without one?
Just cleans and filters interior cabin air
How do you replace the rear windshield wiper on a 2008 Toyota RAV4?
The 2008 Toyota Rav4 takes a fairly specialized 12" replacement rear wiper blade that is hard to find in many areas. Once you get the correct wiper, the installation is literally a snap. See sources and related links below for the special rear wiper blade information as well as rear wiper blade installation videos.
How do you reset low tire pressure warning light on a 2006 Toyota Matrix?
Hi I have 2005 Toyota Matrix.
I reset this " low tire pressure warning light."
1. have your keys in ignition and turn to "ACC"
do not have your engine start.
2. push the reset button ( located lower left hand side of the steering wheel)
( in Matrix it is middle one and the label same as the amber warning light.)
keep it pressed for 10 seconds. ( amber light will flash and turn off)
3. turn on and off the engine.
This worked for me .
Where is the oil drain bolt on a 2004 Toyota Rav4?
Where is the oil drain bolt on a 2004 Toyota Rav4?
Should you buy a 2005 Toyota Rav4 with 150000 miles for 3000?
Yes, because Toyotas typically will be good for over 300,000 miles. If the body and interior are good, and I assume it runs good, then that is a good deal I would say
IT COULD BE A WHEEL BEARING THAT IS BEGINNING TO GO OR the constant velocity shaft of the fwd unit. If you start hearing a "clunking" noise when you turn it's the shaft. In any event, it needs to be checked out by a good mechanic
check your power steering level and see if its low or check for leaks on power steering almost looks red like transmission fluid
I have a 2000 grand prix gt and all it takes is pulling out the right fuse located in the glove box. There should be a diagram in there that tells you which one it is.
Loose lugnuts needs to be tightened Loose lugnuts needs to be tightened
How many horsepower does the engine in the 2014 Toyota RAV4 have?
The 2014 Toyota RAV4's engine produces 176 hp @ 6000 rpm.
Where is the oil filter located on a 2005 Toyota Sienna?
Your owner's manual contains this information. Don't have one then get one. Dealer, salvage yard, E-Bay, or a Google Search are sources. If you cannot find the oil filter, then you are not qualified to change you own oil. Take it to someone who is able to find it. This is not brain surgery.
AnswerI have changed lots of oil on lots of cars, and was poking under the hood looking for the oil filter myself. As for in the owners manual, it is not listed, or clearly for that matter. On toyotas website there is a pdf file for changing oil, but it is rather generic and I think it is for all Toyotas. Here is the link. Hope it helps. http:/www.toyotaownersonline.com/pdf/Oil&Filter(New).pdf
If I find the filter I will post a picture. As the van only has 400 miles on it, I am not in a big hurry to get to it. Good luck!
AnswerAs suspected in my above answer the Toyota .pdf file that I referenced is a "general" guide to changing oil in any toyota. The oil filter in the 2005 sienna is located DIRECTLY underneath the exhaust manifold in the front. Looks to be a bit of a contortion, but I will cross that bridge when I get to it. You can see it pretty easily after you realize where it is.
AnswerThanks for the above answers, I would like to also add that if your changing the oil for the first time on a sienna van, the factory installed oil filter is black and so is the surrounding metal work. This makes it very hard to see unless you already know that it's under the front end exhaust manifold. I changed the original Toyota filter to purolator filter which is white, so it's very easy to see now. I used a socket wrench type oil filter removal tool to change the oil filter. The old band type filter remover wrenchs are very difficult to use in the small space under the front manifold. It might be worth investing in this kind of filter removal tool if you plan on doing regular oil changes on your Toyota Sienna. Here are some pictures of the location: http:/www.comportbooks.com/sienna-oilchange.htm
The First Answer is InaccurateThis first answer is incorrect. The oil filter is not mentioned at all in the owner's manual - only the type of oil. The bottom answers are all accurate, and the last recommendation on using a socket-type filter wrench is a good one. Also I found it easier to work from the bottom of the car as you can see the filter when looking from below and work with slightly less contortion.