What does frame off restoration mean?
A frame off restoration means to remove the upper body of the car from the under carriage(frame). The phrase is usually used in connection with older full framed cars but still means the same on cars with subframes. A frame off restoration is incredibly time consuming and expensive but is the only way to correctly and fully restore a classic like a 442, GTO, Chevelle etc...
What if any are body parts are interchangeable between a 1991 mustang and a 1991 cougar?
There are absolutely no body parts that interchange with a 1991 mustang and 1991 cougar. The mustang is a fox body chassis and the cougar is on the mn12 chassis. The older cougars I believe pre 1988 were structurally similar to a mustang, by this i mean engine bays very similar and rear ends interchangeable. As far as the bodies they did not have interchangeable parts.
Lead oxidizes.
no
Nope, cant rust as lead like copper /brass /bronze /muntz metals are non ferrous thus NO rusting is possible
How do you replace third brake light on the hatchback door Nissan Versa?
Nissan Versa center high mount stop light bulb replacement (3rd brake light): Purchase the correct replacement bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Plasma cutter work by emitting a very hot, very bright beam of energy. If you looking into that beam then either you are wearing a welders helmet or you will permanently damage your eyes
How do you repair convertible top on 2008 Audi TT?
We need to know what is wrong with the convertible top before we can determine how to repair it.
Will 2002 Camry sun visors fit in a 2001 Camry?
The sun visor on a 2002 Toyota Camry will fit the 2001 model. It will also fit the 2003 and 2004 models.
Why is steel used to make the body of cars instead of iron?
Iron can rust.
Actually it is because the iron is not strong enough to be able to handle the pressures that steel can. Pure iron is to soft and weak to be of any use and the iron from the blast furnace has too much carbon in it to be useful. That is the real reason
How do you remove the shift knob on a 1994 Ford Thunderbird?
there is a clip on the front of the shifter. pull this out and the outer part of the shifter will come off. next remove the center console. then you can get to the 4 bolts that hold the shifter in place.
How do you straighten bent frame?
A frame on a car can not properly be straightened without the right equipment. This equipment is hundreds of thousands of dollars.
A shop is your best option. They will hook your car up to a frame straightening machine and using measurements and pullers, through a computer they are able to pinpoint the problem and pull your frame back in place. This can get pricey but nothing compared to buying your own equipment.
If you are referring to a frame alone, no car, I would ask a local machine shop. They should be able to straighten it out for a price.
What is a good way to get rid of rust?
There is a great product on the market today that works really well. The name of the product is CLR (standing for calcium, lime, rust). Obviously not only riding of rust, but calcium and lime too. And unlike many products out there that illuminated these things, its not only for the bathroom, but for anywhere ells calcium, lime and rust are found. For example, anywhere there are Faucets or running water and any other weird place those can develop such as sidewalks, campers, vehicles and bikes. Usually, you delute a certain number of capfulls with water and with done soaking and a little bit of elbow grease, your problem should be taken care of. The instructions are on the back of the bottle. Also, not only is this a great product, but unlike allot of the products on the market right now, its derived from natural ingredients that make it good for our planet earth.
It can refer to both the inside and outside of a door panel, but more often than not it refers to the outside door adhesive moldings.
Why do some vehicles have very large wide tires?
Large wide tires are used for many reasons such as: to disperse the weight of the vehicle over more surface area, to increase the tire's footprint creating more traction and better treadwear of the tire, in sports cars it gives more surface area and increases the grip of the tires in take off and cornering
How do you replace the gas tank cover on a Volvo wagon?
Buy a new plastic hinge Volvo part number 31265160. To replace the hinge, push the two center pins through using a punch. This will free up the broken hinge and you can remove it. Attach the new hinge to the door, then set the grommets into the openings and push the pins in to retain the grommet. BE CAREFUL NOT TO PUSH THE PINS TOO FAR. All they need to be is flush with the grommet.
What is most popular car driven in New York city?
Toyotas
Hondas
Nissans
Fords
Chevy
Dodge
Hynudai
are the most popular driven cars in New York City.
What would cause a 93 geo storm to like jerk or almost hop or bounce while driving?
well first i would check if my tires were round...not oval, and then check to see if the road is flat.
How do you reset the radio in a 2002 vw beetle?
The easiest way to reset your 2002 VW Beetle radio is to remove the radio fuse. Keep the radio fuse out for 10 seconds and replace it to its original slot.
How do you install a new drivers side window in a car?
Take the outer door panel off then unbolt the old window from the track then place the new window in the track this will take sometime because the new window has to go in at an angle before you place the new window in the track make sure the track is at the bottom of the door use your hand tp place the window all the way down in the door then bring the window all the way up holding it with one hand at the bottom of the window you need to put the window all the way to the bottom first to make sure the window clips aline in the window track. roll the bottom of the track up intill you can bolt the new window in but be careful if you tighten down the window to tight it will break the put the door panel back on
How do you disassemble console lid on 2004 silverado?
You have a two year old hang on it until it breaks off, that's why I am looking for a replacement lid.
How do you start an auto shop?
Hi there, Well, lot of things matter when starting a new business. But don't you worry I got something that will clear all your doubts. Auto Shop Marketing Expert 'Jonathan Barber' wrote a book in which you find all your answers. You will also get to know about the techniques you must use to grow your business efficiently. Get the copy of book here: socialleafmarketing[dot]com/automotive/. Hope you will find this answer satisfactory.