Bumpers

No it wont. The durango bumper wraps around the side. it might have similar brackets but the bumper design is completly different. Even if it did bolt up it would look pretty funny.

If they have been damaged by taking a hit, resulting in distortion or tearing ,no. Scratches can be filled with a 2 part plastic filler available at auto shops. Car body filler will not stick .

yes. to convert the front end of any 00-02 style neon to a 03-05 style you will just need the newer headlamps and a front bumper. the hood and fenders are the same. unless you want it to look like an srt-4. you'll need the srt-4 hood and bumper and lights.

hi

try these.....http://www.riveria-roof-company.co.uk.

Well you see..if you work the problem you get the answer....if you don't work the problem,you don't get the answer!

-Josh Wrote this! HAHAHA! I LIVE IN THE NYC!!

I like guys too.

http://www.autozone.com/az/cds/en_us/0900823d/80/13/40/8c/0900823d8013408c/repairInfoPages.htm

Try http://www.skjagtech.co.uk/support-pages/x30x/x300-x308-support-and-help-pages.html

10-15 bumper cars depending on the size of the bumper car floor.

Yes but you well need to get new fenders a new hood new headlight assemblies and some other stuff

no well maybe yes.. ehh sort of.. but not really.. i mean i suppose.. but i mean.. i wouldn't.. ya know?

There should be 3 clips at the top of the bumper where the boot opens they are kind of hard to take off, i just used 2 small flat headed screw drivers to pull them up. next there is a screw on each side of the rear wheel arches they are not hard to take off but the hole in the bumper broke on mine so i had to re drill it. then there is 4 clips under the car the same as the 3 top ones, they are even harder to take out because of where they are, i just grabbed a pair of vice grips and ripped them out and replace them when i was finished.

yes with a few modification's

I think it's held on just by those plastic things you ram in there to hold it on. Try finding a Haynes or Chilton's repair manual on Amazon. They should have an answer.

Yes, but not a bumper hitch. Install a undercarriage trailer receiver hitch system.

There are 4 bolts under the hood that need to be removed. They are easy to find and pretty straight forward. Next remove the parking lenses. Each have 4 screws on them. After taking off the parking lenses, reach behind the side marker lenses and remove the bulb. Simply twist them and they should pull out. Now there are 3 tabs that need to be released and then the girll shell will come off. One is located behind each parking lamp. The tabs are connected to the bottom of the grill shell, so look towards the bottom of it. Once you find it, just lift up on it and the grill will come out. The 3 tab is located in the middle of the grill at the bottom. It easier to leave this one last. You will have to reach your arm between the grill and the radiator shroud to get to the last tab. Release that one and your done.

easy

Take it to the garage

4.2 litres

Very easily done - There is a few bolts at the front of the skirt, underneath the skirt, and at the back of the skirt. untighten, and remove skirt. Job Done.. -Oli Very easily done - There is a few bolts at the front of the skirt, underneath the skirt, and at the back of the skirt. untighten, and remove skirt. Job Done.. -Oli

No it will not.

It can fit, but you will need head lights, fenders, hood, grill, and front bumper from a 1999-2000 Civic. Transmission doesnt matter.

Yes it will bolt right up.

If it's anything like my girlfriends 2007, its underneath the glovebox. It's held in place by 3 screws and a wiring connector.

We have detailed instructions on our enthusiasts website. The bumper cover is fairly easy and we have pictures to help.

www.trailvoy.com

repaint it

No.