answersLogoWhite

0

🌎

Buildings

A building is a permanent construction or structure that is built for human habitation. It may be for housing, commerce, industry, education, or other purpose. Questions pertaining to the history and construction of structures which house people at work or home are found in this category.

4,546 Questions

What are ADA regulations for headroom clearance?

The following excerpt is from the 1991 ADA Standards which is currently enforced by the U.S. Department of Justice and will be the enforceable standard until March 15th, 2012. http://www.ada.gov/reg3a.html#Anchor-Appendix-52467

"4.3.5 Head Room. Accessible routes shall comply with 4.4.2."

"4.4.2 Head Room. Walks, halls, corridors, passageways, aisles, or other circulation spaces shall have 80 in (2030 mm) minimum clear head room (see Fig. 8(a)). If vertical clearance of an area adjoining an accessible route is reduced to less than 80 in (nominal dimension), a barrier to warn blind or visually-impaired persons shall be provided (see Fig. 8(c-1))."

When was the Centrepoint Tower built?

The Sydney Tower (known as the Centrepoint Tower and also by a few other names) was begun in 1970 and completed in 1981.

How do you program casio Ce 6100?

hi,

i am currently helping a friend to program this cashier machine.

Here are some tricks to start off programming of this machine.

To start program:

1. Turn key to PGM mode

2. key in either 2, 3 or 4 then press sub total.

3. key in the program data* or char.

4. when finish, press either CA for mode 3 or sub total for mode 2 to end the mode.

===========================================================

* for program data, this is the tricky part.

in way data are key in are in an reverse order. meaning you key in the last digit first then the first digit last in the program mode.

example:

program data key in = " 1 1 1 1 1 1 1 1 1 1 1 "

Order in manual = D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0

This is the start... please state exactly what you looking for, then i am able to help more.

thank you

What is the definition of plinth area and carpet area?

It is the covered area of the building measured at plinth level/floor level by taking external dimensions. Plinth offsets,courtyards

If you were a building what would you do?

AnswerIf I were such a thing, I think I would just sit there and look pretty! I would open my doors to people and let them look out my windows. I would give them shelter from the climates that they could be exposed to. I would give them warmth and coolness. I would even give them a place to wash up and relieve themselves from daily waste. If I were a building I would stand tall and look over the city. AnswerI would eat people and smaller buildings until I was big enough to rule the world! AnswerIf I was a building I would not have a brain or any way of locomation, so I would be unable to do anything. AnswerIf I were a building I would be the worlds biggest happiness centre, it would be warm and welcoming for all the lonely and elderly people, a place to cure all the sick and feed the hungry, a place for reconciliation to stop the fighting and wars, and a place of plenty so those without, don't feel the need to steal from those who do, it would have a tranquil room for the WikiHolics to rest and finally there would be a mobile annex that would sneak up on all the grumpy people in the night and put a squirrel up their night shirt. AnswerI would get laserbeams and blow up those fudged up terrorists.

right before someone walks in me, i would close the door and watch em fall!!

Can you destroy the Caspian border tower on battlefield 3?

Yes it is very much possible. I have done and seen it before. The only way that I know of to destroy it is to shoot the cords that support it. To get a better picture on how to do this look it up on a video website I have seen a few showing how to do it.

How long does it take for gm to build cadillac CTS car?

There is no specific information on the CTS from General Motors, but on the Toyota website, they say it takes from 17 to 18 hours to build a car. Some of the jobs involved include stamping, assembly, and welding, as well as painting the car and inspecting it.

What is the distance between Burj Dubai and Burj al Arab?

The two buildings, which are not directly related except by name, are about 7 miles apart (11 km). The Burj al Arab is built on a small island off the Jumeirah beach, while Burj Khalifa is inland to the NE, in the new Downtown Dubai complex.

On Halo 2 can you get on the tallest building in the game alone?

I think you can with a few grenades, and a lot of time on your hands.

Mark 7 window wont go down unless you help it and you hear a clicking noise?

It sounds as if your window motor is either going out or the window regulator is binding somewhere. I have heard of people putting a good silicone spray along the window track and that sometimes helps. You will have to remove the interior door panel to get access to the window track. It is what the window slides up and down in. (the left and right side of the window.) Good luck.

How big is a building when the scale is 1 to 24?

That means one unit of measure on the model (inches, feet, meters, etc.) equates to 24 of the same unit on the real thing.

So for example if the model is 1 foot tall, the real building is 24 feet tall.

How much did it cost to rebuild the pentagon?

Cost of reconstruction: $700 million, on top of $1.2 billion total cost of already ongoing renovation of entire building.

Target completion: Spring 2003

Which is the tallest building in US?

Currently the Willis Tower (formerly Sears Tower) in Chicago is the tallest building in the US at 1,451 feet. One World Trade Center is under construction in New York City on the site of the former World Trade Center. One World Trade Center will become the tallest building in the US at 1,776 feet. It is scheduled for completion in 2013.

What are names of sports arenas?

There are many, but Yankee Stadium, Soldier Field, and Wrigley Field are among the most famous.

What is the clicking noise when it accelerate?

you need to give more detail on where the noise is coming from. Otherwise it could be several things such as exhaust leak, rockers, lifters, or valves ticking bcause they are bent. ac compressor ticking because its bad. several other things. be more detailed. specific.

How has the toaster changed over the years?

It hasn't really, but they are looking stylish now like stainless steel ones.

Clicking noise when i accelerate?

maybe a loose connection or may jus need readjusting

What are the treatments for water on the knee?

Often an injury can cause inflammation to a knee and the body may respond by producing extra synovial due to the inflammation . Doctors often use a syringe and large bore needle to drain excess synovial fluid while providing whatever medical attention is necessary to help the joint heal. Corticosteroids can be injected at the same time to help relieve the inflammation. If X Rays or MRI indicate any fractures or ligamentous tears, these may require surgical repair.