0
Ford Windstar SEL
The Ford Windstar SEL was a second generation Windstar model manufactured by Ford Motor Company from 1999 to 2003. Some of the features of this vehicle are adjustable head restraints and an LCD screen.
639 Questions
What causes a catalytic converter to turn red?
The purpose of the catalytic converter is to change any unburned hydrocarbons into carbon dioxide and water. As engines become less efficient unburned hydrocarbons and often even raw fuel can be sent out the exhaust.
Once unburned hydrocarbons get to the catalytic converter they are oxidized, resulting in the release of quite a bit of heat.
If your catalytic converter is running that hot, you SERIOUSLY need a tune-up and possibly other engine work. The appropriate repairs will help your fuel economy and give you better performance. My name is Michael and I have a 1991 Cadillac Eldorado, 8 cyl. I had a mechanic from work look at my car. He noticed my catalytic converter turning red, so he said, that was my problem. So I towed my car to Meineke, and they put in a brand new converter. It still turned red. So I towed it back to my home and had new spark plugs, new spark plug wires, new pcv valve, new throttle sensor, and replaced both 02 oxygen sensors, front and back. The Catalytic Converter, is still turning red. I saw someone say, it could be the EGR valve, online. So that is what i am going to do next payday, replace that. If anyone, knows what the real problem is, let me know. I keep doing the things i see online here, but so far, the converter is still turning red. I have also paid for 2 dignostic test to find out, and because the test are by reading the information after i hold the OFF and WARMER BUTTON down. I still do not see what the main problem is. Someone please help me find out what is my problem, Thanks
How do you reset the anti theft on a 96 Grand Am?
How do you reset the anti theft on a 96 pontiac grand am?
Ok, please follow this very closely. Turn the key on to the on position. Just far enough as to not start your car. You will see anti-theft system flashing. Let it flash for about 10 min. When it quits flashing, remove the key and let it set for about a minute or two. Put the key in the ignitiion and attempt to start. It should work. This worked for me.
What would cause 1990 Volvo 740 GL to stall while driving?
There are several things that can cause your 1990 Volvo 740 to stall while driving. The most common cause is a bad fuel pump.
Why would a 1999 Wrangler Sahara stall at stop lights as well as while driving down the highway?
I would first check to make sure the security chip is clean and well seated. I had to get mine replaced as my Jeep was doing the same thing.
Another possibility is that that the idle air valve may have carbon and gunk built up on it. This part bolts onto the throttle body, but is relatively easy to get to once the throttle body is unbolted from the engine. It can be cleaned with a can of carb/choke cleaner, which is cheap. You would need to have a set of torx sockets to remove the valve from the throttle body to clean it, but you will only be removing two screws, so I would recommend borrowing some if you don't have any.
What would cause a grinding noise when turning the steering wheel in a 2004 Volvo S40?
Check the wheel bearings
if it is only when you turn, you may want to check the backing plate as if it gets bent or warped, it can rub on the rotor as you turn. I had that problem, and a simple bend into shape and it was fixed.
Gauges are spinning what does that mean?
This could mean any number of things depending on what sort of vehicle you are in.
A serious vacuum leak could cause that.
1999-2003 Ford Windstar gas tank capacity?
It depend on the style if you have a Gl or LX.
The GL is 20 gal or 75.7L
The LX is 25 gal or 94.6L
========================================================
I checked the 1999 through 2003 Ford Windstar Owner Guides and they all
show :
( 26.0 U.S. gallons / 98.4 litres )
Why would the Park and Neutral lights light up on the dashboard and your car not start?
YOU CANT START A NORMAL AUTONATIC TRANSMISSION IN GEAR, HOWEVER YOUR DASH INDICATES THAT YOUR NOT IN GEAR. ONE CAUSE COULD BE DAMAGE TO THE LINKAGE BETWEEN YOUR TRANS AND GEAR SELECTOR. THIS WOULD INDICATE A DIFFERENT GEAR THEN THE GEAR SELECTED. YOU MAY ALSO CHECK THE PARK PINS IN YOUR TRANS.
What does yellow exclamation light above speedometer in a 2002 ford windstar indicate?
That's your LOW tire pressure warning light in a 2002 Ford Windstar
Tire size on 2002 ford windstar?
On a 2002 Ford Windstar :
Open the drivers door and on the latch pillar will be an
information sticker that shows the original size of tires
on the vehicle from the factory
Headlights flash in and out when you push on the gas of my 1996 ford windstar?
Do you mean they dim when you push on the gas? If yes then try having the alternator and/or battery checked. Normally the battery should be between 13 and 14.5 volts when running.
Ac freon capacity on a ford windstar sel?
The freon capacity is usually on a sticker under your hood butsometimes are missing and it will depend on whether or not you have rear AC on your model. On a 03 Windstar SEL without rear AC it takes 2lb 12oz if it has rear AC it takes 3lb 8oz.
Antifreeze leaking from 2001 ford windstar?
probly leaking at the y pipe coming off of the water pump it is adealer only part,its a steel pie that is leaking at crimp welds or a pin hole,its a common thig with wind stars
What does 2001 vw beetle wheel bearing noise sound like?
Im not sure if the sound is from the wheel bearing, but my car is making a weird sound when I accelerate.It sounds like a dying cat. Or a little bird whistling.
Just got the price tag on my back right wheel bearing, $475. It sounds like a loud vibration/rubbing sound, very noisy. At first I thought my muffler was going bad.
What does 1999 Ford Windstar p0135 code mean?
Trouble code P0135 means:O2 sensor heater circuit malfunction
(Bank 1 Sensor 1)
Windstar transmission fluid - How much - what type - how to check levels - dipstick?
The Owners Manual will have illustrations and detailed information regarding transmission fluids, specifications, location, how-to read the dipstick, etc.See "Related Questions" below for links to FREE online Owners Manuals
What's the type?
Mercon V is the specified fluid type
Recommend a Synthetic ATF - it will last longer and resist the heat better as well. You could also install the separate Transmission oil cooler and filter to help prolong the transmission life.
1995-1998 - 12.25 qts. / 11.6 liters
1999-2003 - 13.7 qts. / 13.0 liters
- After a fluid / filter change with just the pan off - it would take only 4.5 qts. to fill it back up. (The rest remains in the transmission lines, gears, torque converter etc).
- One should not have to add more than a quart or two - more than this indicates a serious problem or leak.
Where's the dipstick and how to check levels?
The dipstick is close to the driver's side of the engine compartment, back close to the firewall. If you are standing in front of the car, it will be just a bit to your left of the brake master cylinder, down low
Checking level (from the Owners Manual)
- NOTE: Automatic transmission fluid expands when warmed. To obtain an accurate fluid check, drive the vehicle until it is warmed up (approximately 30 km [20 miles]). If your vehicle has been operated for an extended period at high speeds, in city traffic during hot weather or pulling a trailer, the vehicle should be
turned off for about 30 minutes to allow fluid to cool before checking. - Drive the vehicle 30 km (20 miles) or until it reaches normal operating temperature.
- Park the vehicle on a level surface and engage the parking brake.
- With the parking brake engaged and your foot on the brake pedal, start the engine and move the gearshift lever through all of the gear ranges. Allow sufficient time for each gear to engage.
- Latch the gearshift lever in P (Park) and leave the engine running.
- Now it's time to pull the dipstick - wipe it clean - make sure it goes all the way back way in to get a good reading
Where to add more fluid?
Through the dipstick tube if automatic transmission.
Through a removable plug on the side of the transmission if standard/manual trans.
Refill through dipstick tube DO NOT OVERFILL
NOTE:- A long funnel will be handy to reach the top of the dipstick tube.
- Put in small amounts at a time to avoid over-filling
Where's the drain-plug and filter?
There isn't one a drain-plug - the 'pan' has to be removed to drain
See "Related Questions" below for draining & filter changing procedures
See "Related Questions" below for more Transmission fluid goes into the same small tube that the transmission dipstick is in.
You'll need a funnel with a somewhat long tube in order to reach down into the engine compartment to the top of the tube. This is well detailed and illustrated in the Owners Manual - See "Related Questions" below for more
Transmission fluid goes into the same small tube that the transmission dipstick is in.
You'll need a funnel with a somewhat long tube in order to reach down into the engine compartment to the top of the tube. This is well detailed and illustrated in the Owners Manual - See "Related Questions" below for more
Location of keyless entry code on 2003 windstar?
Ford cars and such will put a sticker on the hinge or back gate with the numbers on it. It will just be a white sticker with black numbers. A five digit code. Ford provides this number on a small credit-card type card, inside the Owner's Manual binder.
When should the timing CHAIN of a 1996 Nissan Sentra be replaced?
Replace it when the engine needs a complete overhaul, if the chain becomes noisy, or if you are unable to keep the engine timed. Normally they last well over 100,000 miles.
Which fuse or relay operates the driver's side electric seat on a 2000 Ford Windstar SEL?
I believe the owners manual say it is #104, in the fuse panel that is next to the battery. My power seat will not operate and I looked in the book several hours ago. I still cannot figure out how to open the fuse box to test the fuse. Greg Also make sure you haven't lost the ground to the seat switch. It is the black wire coming from the seat switch assembly. It goes to a terminal (g-200) in the left kick panel. The reason I say this is the Windstar must have close to 50 ground points in the control system. Losing one will cause a group of devices to stop working. I suggest getting a set of wiring diagrams if you are going to work on this vehicle. It is VERY complex. I got mine for next to nothing on-line. At least now my confusion is organized. Carl
Should the timing chain on a 1995 Isuzu Trooper be replaced after 100 thousand miles?
It's actually a timing belt and the recommended interval for replacement is every 50,000 miles.
It is most likely due to a loose power steering belt. If the steering wheel is hard to turn at speeds slower than 40mph or it gets harder the more you turn it and the squeaking noise happens when you turn the wheel, then you need to check the tension on the power steering belt.
Overheating can cause some serious engine problems. Once the check engine light is on you need to use an engine diagnostic code reader to find out what's wrong. You can borrow, rent or buy the code scanner from most auto parts retailers.
How do you fix traction control on a Ford Windstar?
Depends on what is wrong with it.
My traction control did not work as long as there was a problem with one of the ABS wheel sensors - the two functions are tightly integrated.
